Live Stoner Chat Live Stoner Chat - Jul-Sep '22

[Dr Fluff]

@Mossy I pulled the trigger and decided to buy some Brain Damage auto. So we will see if the plant lives up to the hype!
Brain Damage Auto - Grower Choice. The THC- and CBD-levels in this strains are so high that even experienced smokers describe this one as being too heavy. a enormous body stoned feeling that will last you for a really long time.

The other strain I plumped on , is Super Skunk Auto!
At a recent get together with some pals.
We were chatting and the conversation turned to when various people had visited Holland..
I said that while I was there I (in the 1990's) bought some Supper Skunk, it had been released that year!
It was a great smoke and my pals agreed with me.
So it was decided, I would grow Super Skunk Auto, to go with my Brain Damage Auto.
Certain Strains, never go out of fashion, they just endure as classics.
Next outdoor grow Northern Lights is up!
Nice stoney high and isn't a stinker!
I'm all ready planning for next year!

 

[Dankerson]

Sweet. Do you use the bags or do you just squish like a gram or so at a time using parchment paper? Had a friend that had one and he never used the bags.

I would definitely use bags. I've heard the press club bags work well but Ive only used the nug smasher 3.5g bags. They work great, only had one blowout so far.

I use a dabpress 3.5g pre-press and use a chottle technique which is basically just cutting the top and bottom off so you have the bags only covering the sides of the puck. It's nice cause I can get two presses with this method out of one bag cause I can just cut em in half. This has been the most consistent method for me and has gotten me the best yeilds.

 

[Talonxracer]

Yeah, The DHP5 looks like a great deal, and then you get another 10% from the code here. That’s less than 4 bills all in with shipping and tax

That is the press I am considering. Not that I have a clue as to what is really required, I have never smoked anything but flower, but am very interested!

 

[Zer0]

Really thinking of pulling the trigger on a rosin press,…what do you all think is the best route?

Thanks for any help

I'm in the same boat but I'm playing the waiting game for a review freebie lol but if i was going to buy a dabpress i would DIY mine and buy a 20 ton H frame press and buy some 4x7 heating plates for it. If you shop around you can get a press pretty cheap under $200 and the plates depending on brand will be $200+

Goodluck!!

 

[MedCzech]

That is the press I am considering. Not that I have a clue as to what is really required, I have never smoked anything but flower, but am very interested!

Damn man, you need to try some wax or some kind of concentrate. Different kind of taste and high IMO. More intense and clean!
Just don’t want to have to pay for it. I will still use all the trim for bud bubble hash, but some buds are going to be smashed here soon I hope!

 

[JP1]

I would definitely use bags. I've heard the press club bags work well but Ive only used the nug smasher 3.5g bags. They work great, only had one blowout so far.

I use a dabpress 3.5g pre-press and use a chottle technique which is basically just cutting the top and bottom off so you have the bags only covering the sides of the puck. It's nice cause I can get two presses with this method out of one bag cause I can just cut em in half. This has been the most consistent method for me and has gotten me the best yeilds.

I'd recommend staying away from press club anything. Bags and parchment are both garbage from my experience

 

[BCBudlady]

@Mossy gettin her groove on!
View attachment 1518645

Likely consequences for that one..

@BCBudlady, did you end up leaving your holiday early due to the last hurricane? I assume you were in Bermuda?

yes. We got out before she hit. I really hope west Florida residents are preparing. They aren’t nearly as battle hardened as Bermudians. Those folks got
the system down. Very calm and collected.

 

[Lil Dab]

Hey @Fermented_Fruitz

Bought an Ardent awhile back, but still haven't put it to work yet. Can you run MCT oil through the thing twice to make super concentrated oil? Like run a batch and then run a new batch with the same oil thereby making it double?

Will that work or will it make the oil do something funky?

hey goo not sure what that would do to oil but what about just adding more flower or pucks whatever your using? My wife does all our infusing and edible making my knowledge is limited

I would definitely use bags. I've heard the press club bags work well but Ive only used the nug smasher 3.5g bags. They work great, only had one blowout so far.

I use a dabpress 3.5g pre-press and use a chottle technique which is basically just cutting the top and bottom off so you have the bags only covering the sides of the puck. It's nice cause I can get two presses with this method out of one bag cause I can just cut em in half. This has been the most consistent method for me and has gotten me the best yeilds.

I guess everyone has different experiences but the press club bags were the worst for blow outs for me I prefer nugsmasher or dabpress bags

That is the press I am considering. Not that I have a clue as to what is really required, I have never smoked anything but flower, but am very interested!

Ask away it doesn’t take much a bing banger and torch and your good to go

 

[MedCzech]

I'm in the same boat but I'm playing the waiting game for a review freebie lol but if i was going to buy a dabpress i would DIY mine and buy a 20 ton H frame press and buy some 4x7 heating plates for it. If you shop around you can get a press pretty cheap under $200 and the plates depending on brand will be $200+

Goodluck!!

Ok, I might be interested in that route too. I’m decently handy…
What are the steps there? Thanks for any help

 

[JP1]

I'm in the same boat but I'm playing the waiting game for a review freebie lol but if i was going to buy a dabpress i would DIY mine and buy a 20 ton H frame press and buy some 4x7 heating plates for it. If you shop around you can get a press pretty cheap under $200 and the plates depending on brand will be $200+

Goodluck!!

I built mine with a 12ton h frame and 3x5 dabpress plates. It'll handle more then I'll ever press at 1 time