Indoor Bob's Mars Hydro adventure, growing in a TS1000+60x60 Complete Tent Kits

What is that Port Stilton? A SS strain?
 
What is that Port Stilton? A SS strain?
Originally Mephisto, but the seeds I got we're selved (or how do you call it when you use feminised pollen on the same plant?)


As if I wasn't already following along :rofl:
Then take a look at this beauty sis. The Amnesia is really starting off :woohoo1:

Amnesia XXL Auto - Day 6
20211119_082736_small.jpg


Port & Stilton S1 - day 2
20211119_082836_small.jpg


Wedding Glue is up and running, but for more info and pictures you'll have to check out my Solocup Challenge thread. Candy Dawg is still in the doghouse and will probably be out and about by tomorrow...I hope:bow:
20211119_082723_small.jpg


Humidity and temperature are a bit on the high side of things, but still within parameter for vpd.
Screenshot_20211119-093706.jpg
 
Last edited:
Last week I ordered some supplies, which arrived today. Among them where a small fan to keep the air/seedlings inside the tent moving and Aptus Mycor Mix. As the name states it's a mix of mycorrhiza and I applied it just before taking these pictures. Don't know if the plants will have benefit in such a small container, but I didn't have to use much of it, so it will be used again in the greenhouse next season.
20211120_163625_small.jpg


Port & Stilton S1 - Day 3
20211120_163406_small.jpg


Amnesia XXL Auto - Day 7
20211120_163426_small.jpg


Candy Dawg still hasn't showed it's head. Sorry @Seedstockers-Mark, but if this one doesn't show you'll have to wait until next year in the greenhouse. Hope you understand. I'm still keeping my fingers :goodluck: for it to surface :thumbsup:
20211120_163550_small.jpg


With the internal fan I needed to go to 75% on the TS1000 so the temperature and humidity are stil on par :coffee:
Curious to see what happens when the fan/filter combo from @Marshydro arrives and starts pulling air from the tent. I'll probably will need a small humidifier to keep humidity up where it needs to be. I'll probably will put the inline fan on a timer or make something that will turn this off when humidity goes to low... ESP8266 to the rescue :shooty:
Screenshot_20211120-203406.jpg



Regards,

B:toke:
 
Hey guys,

Got a couple of things done today.
  • Installed my action camera. So a time lapse is on its way :toke:
  • Removed the Solocup with the Candy Dawg as it didn't emerge. Will try again next season in the greenhouse.
  • Searched for a good replacement candidate and went for Auto Purple Kush
  • Took some pictures
20211121_153051_small.jpg


Port & Stilton S1 - day 4
20211121_153141_small.jpg


Amnesia XXL Auto - day 8
20211121_153148_small.jpg
 
Not much happened today other then I gave the seedlings some nutrient, took some pictures and adjusted the action camera for a better angle.
20211122_103944_small.jpg


The Amnesia is really starting to go. I've been scrolling though the pictures from the time lapse and really have a window inside the life of plants :wiz:
Amnesia XXL Auto - day 9
20211122_103856_small.jpg


The Port & Stilton is probably doing most her activity under the surface. I can only see the two leaves grow a wee bit. Just amazing what goes around inside the seedling at this stage...dividing the energy between the leaves and rootsystem. Priorities priorities... :tang:
Port & Stilton S1 - day 5
20211122_103901_small.jpg


For those of you that are waiting for the timelapse. Between each picture there's 5min wait time. This means 12 pictures/hour. There are 25 pictures in one second of video. So patience is virtue in this case :pop::toke:


Regards,

Bob
 
Hey guys,

Today only a small picture update. I'm having some problems with the action camera. I connected it via an USB cable to a wall charger just like in the greenhouse... But the camera keeps shutting down during the night... :cuss:
I did get a funny picture today as I got photographed while taking the pictures below...:coffee:
Y0070380.JPG


Port & Stilton - day 6
20211123_094517_small.jpg


Amnesia XXL Auto - Day 10
20211123_094531_small.jpg
 
Hey guys,

Today only a small picture update. I'm having some problems with the action camera. I connected it via an USB cable to a wall charger just like in the greenhouse... But the camera keeps shutting down during the night... :cuss:
I did get a funny picture today as I got photographed while taking the pictures below...:coffee:
View attachment 1390140

Port & Stilton - day 6
View attachment 1390138

Amnesia XXL Auto - Day 10
View attachment 1390139

Your amnesia looking really good!
 
Except for a time lapse :yeahthat:, I've also done some work in and around the tent. I noticed some algae in the right tray. Probably because the Solocup on that side hasn't got a seedling in it... Or maybe because the table isn't completely flat. Either way the tray needed to be cleaned.
20211124_125001_small.jpg


While removing the cups I saw the root system peeking out the holes in the bottom...
20211124_125034_small.jpg


Other side of the same pot... As predicted by @St. Tom the roots get air trimmed.
20211124_125023_small.jpg


The Port & Stilton S1 is also showing roots. Which is cool because...
20211124_125045_small.jpg


...of how small she is still. :yoinks:
20211124_135430_small.jpg


Your amnesia looking really good!
Thank you very much! :cheers:. You can't go wrong with Dinafem such strong genetics and they never disappoint. A shame they got shutdown :cuss:
20211124_135435_small.jpg


I guess I'm at the 4th node now? At least the forth is forming. Should I top it here @Vapo?
20211124_135220_small.jpg


At which line should I cut @Trichome farmer to have the best chance of succes in FIM'ing?
20211124_135256_small.jpg


After giving them a good cleaning I've also started to test out the Autopot system in the bathroom...Just to be sure and to get to know the system before I have an Ohohhh moment...:face:
That's why the 60x60 tray is back underneath the Solocups. :thumbsup:
It's actually to big to fit between the vertical poles of the tent, but I believe I can use a hot airgun to warm up the plastic in the corners of the tray and then press a piece of piping against it, creating a reses for the tentpoles to fit in.
20211124_135451_small.jpg
 
Last edited:
Back
Top