Live Stoner Chat Live Stoner Chat - Jul-Sep '21

[AMG]

You really can't tell an auto by it's looks. I've a good example right now in my greenhouse, two Mazar photoperiods and a Mazar auto. They look identical.

I hear you, but some strains differs a little, or atleast the phenos does. I believe i can see the difference in some plants.
Its a learning curve and i try to remember everything i see. Think it was 2stoned who had a pheno like that. (Edit different seedbank)

 

[Zer0]

chopped last night, i have high hopes for a few full jars maintaining 58% rh at 71F

 

[Zer0]

Here is what they looked like before i chopped em down, small aren't they?

My big girls will be ready next week I'm very excited for them


Blue dream

quarter pounder auto x tangerine dream auto

2 Grandaddy purples, 1 burnt and stunted the other was a runt.

 

[mohawk warrior]

Oooo, which one? Banana is a fav' of mine! I find that often as not the namesake never shows in the bud (purchased stuff from olde days), low % pheno's I figure but the fucking name sells it! Good "banana's" are usually pretty narcotic...

I just finished this White Crack, she's a real throw-back to her Green Crack side with a tropical/mango aroma, not the sweet pepper/dairy funk it's known for....
View attachment 1346427

Biggest one at the orgy pot.
Mmmm that looks delicious.
Narcotic eh.... nice.

What's In them @mohawk warrior .... ...you can only pull out what went in...



@420Forever ......

Mountains.......see them behind the tree level.....?

View attachment 1346429

View attachment 1346430

The one to the right of the pylon is humongus........30 minutes away...30 minutes to drive around......

Auntie.... I don’t wanna do this....
But thanks tips!

guess I’ll quit being lazy and start some research. There’s a bunch of stuff in this..
Based off the narcotic comment I’ll assume one of the kush’s

 

[Mañ'O'Green]

Good Morfnoevight All! EO.

I have a two burner 75K ea. gas stove outdoors. It is 30 years old and the flame won't adjust. I bought a new regulator and no change. So I was searching the interweb for a new one and none of them are better than the one I already own - except for that blue flame. So I am thinking to myself how porting and polishing an intake manifold can improve performance in an engine; maybe that is what this burner needs. Of course the first thing I do is twist a mounting bolt head clean off I was able to drill it out and re-tap the hole The exciting bit is when I started to clean out the flame holes it became apparent that they were filled with rust scale. So after porting and polishing I am happy to have a beautiful blue flame . So since I have it apart it is getting sanded and painted.

View attachment 1346260

My weekly dose of excess sugar…..well 1st dose this week! View attachment 1346329View attachment 1346330View attachment 1346331View attachment 1346332View attachment 1346333

I will take the gluten free, low carb, dairy free one please!

Also I literally have this exact mix and ratios sitting in my yard for me to mix up today lol. I am using this on my next LAG(light assisted greenhouse MOG lol) and I will be using it on my re used soil as well. It’s the tits

I copied that recipe here on AFN and did not make a note of where. I might have got it from you? Anyhow it just rings all of the bells for a refurbish amendment. I just wish someone would point me to where this comes from so the credit can go to the right source.

:smoking: the slight spur in the gearz would be that ur other plantz are under the same light, so switchin to 12/12 could effect their end yield a bit, but it'z nothin much to trip over, so....jus sayin & carry on plz :smoking: ppp

With today's powerful LEDs we can provide enough DLI in a 12 hour time-frames so there is no loss in yield. There is another trick you can use if your lights do not put out enough PPFD to reach 42 DLI in 12 hours. Get a Far Red Puck, set your lights for 14/10 and run the Far Red puck for 10 minutes at lights out. This puts the plants in PFr (sleep mode) right away instead of taking 2 hours without it. This make the 10 hour night the same PFr time as a 12 hour night to the plant. If you cannot get at least 42 DLI with that you need more light.

 

[mohawk warrior]

When the bell peppers are something else lol

Good Morfnoevight All! EO.

I have a two burner 75K ea. gas stove outdoors. It is 30 years old and the flame won't adjust. I bought a new regulator and no change. So I was searching the interweb for a new one and none of them are better than the one I already own - except for that blue flame. So I am thinking to myself how porting and polishing an intake manifold can improve performance in an engine; maybe that is what this burner needs. Of course the first thing I do is twist a mounting bolt head clean off I was able to drill it out and re-tap the hole The exciting bit is when I started to clean out the flame holes it became apparent that they were filled with rust scale. So after porting and polishing I am happy to have a beautiful blue flame . So since I have it apart it is getting sanded and painted.




I will take the gluten free, low carb, dairy free one please!




I copied that recipe here on AFN and did not make a note of where. I might have got it from you? Anyhow it just rings all of the bells for a refurbish amendment. I just wish someone would point me to where this comes from so the credit can go to the right source.



With today's powerful LEDs we can provide enough DLI in a 12 hour time-frames so there is no loss in yield. There is another trick you can use if your lights do not put out enough PPFD to reach 42 DLI in 12 hours. Get a Far Red Puck, set your lights for 14/10 and run the Far Red puck for 10 minutes at lights out. This puts the plants in PFr (sleep mode) right away instead of taking 2 hours without it. This make the 10 hour night the same PFr time as a 12 hour night to the plant. If you cannot get at least 42 DLI with that you need more light.

Hohhh more power!!!!
Lol plan sounds solid and drilled out and re-tapd , nicely nicely rep smack worthy

 

[hairyman]

What's In them @mohawk warrior .... ...you can only pull out what went in...



@420Forever ......

Mountains.......see them behind the tree level.....?

View attachment 1346429

View attachment 1346430

The one to the right of the pylon is humongus........30 minutes away...30 minutes to drive around......

That your hoop house

Another bath full, going to have to cul two,, but I like them all lol

These are remaining individual 1ltr

 

[derek420colorado]

Good Morfnoevight All! EO.

I have a two burner 75K ea. gas stove outdoors. It is 30 years old and the flame won't adjust. I bought a new regulator and no change. So I was searching the interweb for a new one and none of them are better than the one I already own - except for that blue flame. So I am thinking to myself how porting and polishing an intake manifold can improve performance in an engine; maybe that is what this burner needs. Of course the first thing I do is twist a mounting bolt head clean off I was able to drill it out and re-tap the hole The exciting bit is when I started to clean out the flame holes it became apparent that they were filled with rust scale. So after porting and polishing I am happy to have a beautiful blue flame . So since I have it apart it is getting sanded and painted.




I will take the gluten free, low carb, dairy free one please!




I copied that recipe here on AFN and did not make a note of where. I might have got it from you? Anyhow it just rings all of the bells for a refurbish amendment. I just wish someone would point me to where this comes from so the credit can go to the right source.



With today's powerful LEDs we can provide enough DLI in a 12 hour time-frames so there is no loss in yield. There is another trick you can use if your lights do not put out enough PPFD to reach 42 DLI in 12 hours. Get a Far Red Puck, set your lights for 14/10 and run the Far Red puck for 10 minutes at lights out. This puts the plants in PFr (sleep mode) right away instead of taking 2 hours without it. This make the 10 hour night the same PFr time as a 12 hour night to the plant. If you cannot get at least 42 DLI with that you need more light.

Oh no worries, this is Daz from Nightowls super soil auto mix. He had shared it on IG not too long before I started my LAG journal.

@Frank the Dank was the one who showed me

 

[hairyman]

I copied that recipe here on AFN and did not make a note of where. I might have got it from you? Anyhow it just rings all of the bells for a refurbish amendment. I just wish someone would point me to where this comes from so the credit can go to the right source.

i sure that's mine except i add cornflakes and tea bags don't forget the farlie rusks

That's what i am wanting a far red bar i think from what i am reading that with auto it would be beneficial to run for full light on?

 

[420Forever]

Here is what they looked like before i chopped em down, small aren't they?

well jeez man, they're bigger than thoze buildingz, so.... ppp