Live Stoner Chat Live Stoner Chat - Apr-Jun '24

Dutch Passion Lemon Z
Status
Not open for further replies.
Reader mode
Day 28 Laughing Hyena girls are doing great just been leaf tucking and feeding daily. Still seeing some issue I think it's a mg issue whether it's not enough or too much k I'm not sure. Most of them look fine so not going to make any adjustments quite yet flower is about to start so hopefully that will go away as they need more K. Currently feeding 4 gram MC 1 part, 1 gram Epsom salt, .125 Raw P, per gallon and bennies once a week silica, kelp, fullvic, Yucca, Hydroguard, and Mammoth P

Lighting is at 22-24” away from canopy 600 umol 18/6 at the canopy once they start stretching I’ll keep the light between 24” to 18” away


IMG_9774.jpeg

IMG_9775.jpeg



Sowahh Queen

IMG_9776.jpeg

IMG_9777.jpeg

IMG_9778.jpeg



Dead Skunk


IMG_9779.jpeg

IMG_9780.jpeg

IMG_9782.jpeg




Lil Stick


IMG_9783.jpeg

IMG_9784.jpeg

IMG_9786.jpeg




Northern Berry


IMG_9787.jpeg

IMG_9788.jpeg

IMG_9789.jpeg
 
Bill.de.Cat said:
Mine was just a replacment down the line at the end. not sure if I could source locally one that would go through the grommet.
Click to expand...
Yeah, like if it's line that is connecting cross connectors just has to be ID 1/4". May just be less painful to order from them. Do the math with shipping and see which is cheaper by the ft. the 10' or 100'. It's amazing how fast you can eat up tubing trying to run it to your pots. If I got 100' I think I would be good for life lol.
 
McDee said:
Both. Both are "3/8" as they call it. According to their site the tubing OD 9.1mm which is 0.358268". 3/8" is .375", so their 3/8 grommet is a little smaller. If I try to put 3/8" OD in it would not fit. You may squeeze it in because it's close, but may pinch ID closed or not have a gab on the outside. I'm sure that's why they made that size. The ID is easily found, but gonna be a unicorn that has both ID & OD that match.
Click to expand...
It's so you have to buy their stuff. It won't pinch the inside but it'll wrinkle the outside and leak
 
Fermented_Fruitz said:
Also i was referring to the cross piece that u said was leaking and how that fit into the hose didn’t realize u had any need of replacing the line itself! Thats why i said that cuz as long as inner diameter was same it would still fit snugly onto that cross piece!
Click to expand...
Well I'm looking to the future, and expanding. I normally do 2 at a time. Had an issue during germination. I did two more, and 3 of the 4 ended up popping. I didn't want to waste a seed that germinated. I was gonna put 1 in a solo cup, but remembered I have 2gal bags. I figured I would hand feed it. I forgot I had 2 never used xl autopots sitting on the shelf. I use 2 xxl so I can use my grow bags. I put it in, and now trying to turn them is tight in a 2x4. If I could get tubing cheaper I would redo so I could arrange better. Not a must, but be nice. I'm on a tight budget for the garden so always looking to do it cheaper.
 
Most leaks I've had with the autopots are slow leaks and can be handled with folded paper towels or cutting and reseating the tubing. Major leaks come from the valve :pass:
 
Reader mode
Status
Not open for further replies.

Similar threads

420Forever
  • Sticky
Live Stoner Chat Live Stoner Chat - Oct-Dec '24
865 866 867
Replies
9K
Views
94K
MidIN2
M
420Forever
  • Locked
Live Stoner Chat Live Stoner Chat - Jul-Sep '24
1758 1759 1760
Replies
18K
Views
275K
wwwillie
wwwillie
Dutch Passion Lemon Z
Back
Top