Indoor Jean-O's Genetics Autoflower seed Run Finish

Cream Cheeze F1Fv outdoor got harvested yesterday. She had some nice chunky buds.
20240706_121611.jpg
20240706_121618.jpg
20240706_131401.jpg
20240706_131405.jpg
20240706_131408.jpg
20240706_131730.jpg
20240706_132421.jpg
 
The new grow/business room project is moving along. I'm slightly behind schedule but what's new! Hopefully by the end of the month I'll have this build finished up so I can get back to creating magic! So in my old 10x 12 bedroom I will have 2 grows. 1 being a 3x7x8 grow chamber and the second will be a 4x4x8 chamber. I will have a designated drying rack and a rosin pressing station with a small fridge and freezer for storage. There is plenty of room to add in a desk for the computer and packaging along with cupboards for storage. I'm pretty geeked up to have a legit business room for my works! I ended up going with a mold resistant white laminate paneling in the actual grow chambers. I still need to figure out what I want to use for flooring. I've been looking at a garage floor rubber like coating I'm thinking about putting down in the grow spaces.
View attachment 1692768View attachment 1692770View attachment 1692771View attachment 1692772View attachment 1692773View attachment 1692774
Nice!
I wish I knew someone that I could consult with on the design of my grow room out in the shop. There's some things that I can handle and easily calculate. There's a lot of stuff I don't have a clue about. I could probably pull it off but I'd rather have someone give me some guidance, at least.

I haven't even looked to see if there's any engineering CAD programs out there for designing rooms. Best of all I already have single phase ran back to the corner where I plan to put the grow room. I'll just have to bring others back. Plenty of headroom at my box to do that . I want it nice and large for I can have several quadrants and areas to work my cannabis once I harvest it. Pretty much like you got there.

I think I'm going to go out in the shop, take some measurements and come back here and make a thread about it. Maybe I can get some input from experts! I really want it to be as professional as possible. You know, within limits.
 
The business room build is inching closer every day! Hopefully by the end of the month I'll be back up n running! So the 2 new grow spaces ended up roughly a 5x4x8 and a 3x7x8. I should be able to pack in quite a few in each space now! 4 New Vipaspectra 245 watt full spectrum LEDs to power the grows plus I have a few 100 watt LEDs and the Mars SP3000 so I believe I have plenty to power these rooms! I still need to get a few more fans, I'm definitely itching to get these running!
20240714_153113.jpg
20240714_153118.jpg
20240714_153126.jpg

I made a small rosin pressing station in the corner. I had a chunk of countertop leftover from the kitchen so i had just the spot for it lol
20240714_153132.jpg

The 3x7 room.
20240714_153135.jpg
20240714_153139.jpg
20240714_153146.jpg
20240714_153201.jpg
20240714_153156.jpg
 
Finally getting the new grow up and running. This is going to be an epic journey.... I'm still finishing up the new business room but the first grow chamber is close enough to get a few things up n running, I'm totally stoked to be back up n running indoors with my projects! So far up n running I have some photoperiods.
Bloody Cream Cheese F1
Honey Badger F1
And I'm patiently waiting for the Northern Cream Cheeze Haze F1 to germinate.
Also for autos I have
Straw Dawg S1
Citradellic Spice S1
And
Lecter
20240817_194055.jpg
20240817_194101.jpg
20240817_194105.jpg
20240817_194107.jpg
20240817_194118.jpg

This run is powered by a 4 inch AC Infinity exhaust fan
Mars Hydro SP3000
And a Vipaspectra 250 watt full spectrum LED in this new 3 x 7 x 8 grow!
 
The indoor run is starting out Soso as I'm still trying to dial in the environment and set everything up. I had a bit damper off on me and found out I was dropping in temps and spiking humidity at nights so I'm trying to dial that in on top of finish building the room which I lost all last week from falling I'll so live and learn...
20240825_201621.jpg

I've got 3 Bloody Cream Cheeze F1 and 2 Honey Badger F1 currently growing along with 2 Straw Dog S1 autos.
 

Attachments

  • 20240825_201621.jpg
    20240825_201621.jpg
    1.7 MB · Views: 3
The outdoor Helter Skelter S1 Clone is rocking in the greenhouse! Getting close to the finish with around 3-4 weeks left.
20240825_160618.jpg
 
The indoor run is starting out Soso as I'm still trying to dial in the environment and set everything up. I had a bit damper off on me and found out I was dropping in temps and spiking humidity at nights so I'm trying to dial that in on top of finish building the room which I lost all last week from falling I'll so live and learn...
View attachment 1702779
I've got 3 Bloody Cream Cheeze F1 and 2 Honey Badger F1 currently growing along with 2 Straw Dog S1 autos.
It always takes some time to dial in a new space man! With this last revamp I did, I think I finally got everything dialed in the way I want it.
I just wish I could control my dehumidifier with my phone. I check on the girls just before lights out and then turn down the dehumidifier for the night. At first light, I turn it back up. If I could program that, I'd be even happier!
 
I'm still working on finishing up the new business room. I've had a few setbacks with getting the environment dialed in but things are progressing forward and I'm getting it dialed in as it goes. I'm super happy with how it's going so far.
3x Bloody Cream Cheeze F1
2x Honey Badger F1 in the 5x 4
And a couple of the Legend and a Twisted Gorilla vegging along with a couple of Straw Dog S1 and Citradelic Spice S1 while I'm waiting on the Lecters to pop up in the 3x7.
20240903_181844.jpg
20240903_181911.jpg
20240903_181927.jpg
20240903_181932.jpg
20240903_181943.jpg
20240903_181946.jpg
20240903_181951.jpg
20240903_181954.jpg
20240903_181957.jpg
 
Back
Top