Mars Hydro TSW 2000 ( Light test) & Auto Top drip irrigation setup

[NORB YIPPLS]

Thats what I'm thinking too about the LM,
I did test the drippers out abit early on day 4 or 5 and maybe I overwatered them, lol
Didn't check the Ph

Went and done a few tests to try figue out the problem.

RES. Temp 17°c
PH 6.6
ppm 88

TAP Temp 18°c
WATER PH 6.8
Ppm 89

FEED Temp 22°c
PH 6.9
Ppm 99
The thermometer i ways using before must of been faulty. Cos the new one reads alot lower temps than the old one,
Before I did the dripper test I checked and the res was 21°c

 

[NORB YIPPLS]

Went and done a few tests to try figue out the problem.

RES. Temp 17°c
PH 6.6
ppm 88

TAP Temp 18°c
WATER PH 6.8
Ppm 89

FEED Temp 22°c
PH 6.9
Ppm 99
The thermometer i ways using before must of been faulty. Cos the new one reads alot lower temps than the old one,
Before I did the dripper test I checked and the res was 21°c

@Shiva's Mistress

 

[NORB YIPPLS]

Removed the worst one for a soil test and ph was ok, destroyed plant acter.
So giving seedlings 16/17°c water might be the problem due to s faulty temp pen.
Res is ok except for the temp so got a aquarium heater on its way.
3 Bronson seeds germing now and 2 new pots and soil ready, will remove more if they don't improve after a feed now soon and get them in. ASAP
Not bothered now cos can always do some more
But with a 13-15 lag behind the lecters will average different heights now

 

[hope2grow]

Removed the worst one for a soil test and ph was ok, destroyed plant acter.
So giving seedlings 16/17°c water might be the problem due to s faulty temp pen.
Res is ok except for the temp so got a aquarium heater on its way.
3 Bronson seeds germing now and 2 new pots and soil ready, will remove more if they don't improve after a feed now soon and get them in. ASAP
Not bothered now cos can always do some more
But with a 13-15 lag behind the lecters will average different heights now

We crack on m8.. you've conquered worse

 

[JP1]

My rez is regularly around 45*f (7c) most of the winter. I wouldn't worry about temp at all

 

[NORB YIPPLS]

My rez is regularly around 45*f (7c) most of the winter. I wouldn't worry about temp at all

Could it be light stress as the light was on 100% @ 27 inches high,
Or the tubing messed with my pH after it left the Res,
Ah I don't know lol
But just gonna crack on
And if any don't look too good I will just evict them and replace them with new starts
Bronson,

 

[NORB YIPPLS]

Greens coming back and looking better again I think,
but minus the 1 that looked the worst.
But i did some how end up with 2 more pots & 4 germed seeds that I thought was 3 seeds,
Bronson will be arriving tomorrow to go in the 2 added pots.
@Sawney_bean
Lecter
7 - 8 L & 1 very small pot too
Bronson
2 - 8 L pots
SSSC Auto Creeper x 1 - 8 L pots
& 1 tiny pot too
Got some variety this time now

 

[Sawney_bean]

Greens coming back and looking better again I think,
but minus the 1 that looked the worst.
But i did some how end up with 2 more pots & 4 germed seeds that I thought was 3 seeds,
Bronson will be arriving tomorrow to go in the 2 added pots.
@Sawney_bean
Lecter
7 - 8 L & 1 very small pot too
Bronson
2 - 8 L pots
SSSC Auto Creeper x 1 - 8 L pots
& 1 tiny pot too
Got some variety this time now

BRONSON is a nice smoke mate. Mild and dreamy. Very pleasant .

 

[NORB YIPPLS]

Greens coming back and looking better again I think,
but minus the 1 that looked the worst.
But i did some how end up with 2 more pots & 4 germed seeds that I thought was 3 seeds,
Bronson will be arriving tomorrow to go in the 2 added pots.
@Sawney_bean
Lecter
7 - 8 L & 1 very small pot too
Bronson
2 - 8 L pots
SSSC Auto Creeper x 1 - 8 L pots
& 1 tiny pot too
Got some variety this time now

BRONSON is a nice smoke mate. Mild and dreamy. Very pleasant .

Going to drop the seeds in soon mate.
My Aquarium heater comes today so I can also test that out and get the res in operation.
Gona keep the res filled and detach the main line so I can use the pump to fill my water bottles straight from the res.

 

[NORB YIPPLS]

Hoping this will make my res the correct temperature now.
It kinda has me on edge tho with 3 power sources going into a 45 L bucket of water lol.

Its got abit expensive to make this Res set up tho,
thinking I could of just bought one pre made, but weres the fun in that.
I Love making things lol

For the bucket, pumps & heater come to around £80 ish
Then there's the tubing and connecter tees then,
so that would be another say £20-£30 quid on top.
I also fucked up a 23 L Res that cost £25
It all adds up but it gives me something to occupy the mind