Mars Hydro TSW 2000 ( Light test) & Auto Top drip irrigation setup

[Bob's Auto's]

So how many should I use in my average 7/8 L pots.
what's your thoughts on your Goldilocks method in the greenhouse
and should I push them in asap when they arrive, thanks for the advise Bob, how would it stunt them putting them in,
Can I add the tabs on top and put light mix over them,,?

On those pots I would use one BioTab, that combined with the other additives will be enough for one plant. If later you notice you have a heavy feeder you can always supplement with some extra Silicium Flash, but plants in 2 gallon pots don't tend to grow big
You can damage the rootsystem when plunging that tab into the soil. You can risk it, but why? Just put that tab in there a couple of inches beneath the surface and except for a weekly Tee after they start to flower you only have to give 'm plain water

 

[NORB YIPPLS]

Day 6.
Everything going well.
But I'm down the little one due to rough handedness fixing a dripper stake.
The water pump works well but gona hand water until a little bigger now that I've tested it out with success. Don't want to wet them too much yet.
I've already got too overexcited lol

I will put 1 biotab in each pot when they arrive in a day or 2.
And i will also aquire a few more of the biotab range to go along with the tabs.

Considering the mishap I had its given me the opportunity to germ more seeds so im gona remove the other small one and repot them up with 2 Auto Creepers I kindly got from The SSSC and do a separate journel.

 

[NORB YIPPLS]

Thank you @Marshydro

 

[NORB YIPPLS]

Got this the other day.
Just what i needed for checking the temp in the res so I don't have to reach in with the pen one.

Res temp sits at around 20 - 21°c
The small water pump that's going 24/7 is generating heat,
I attached a bit of tubing to the end of the pump that goes out the res to aerate the water.
Want to attach a water butt tap on the res too so I can take the water from thier if hand feeding.

 

[NORB YIPPLS]

Week 1 for these fine specimens.

I noticed some possible space so took the piss as per usual and put another pot in and refilled the tiny fabric pot with soil.
Got 2 SSSC Auto Creepers thats going in tomorrow.

The drippers have been temporarily moved out off the way untill I'm done hand watering, and so I can do some Lst on them before putting them back in place.

 

[NORB YIPPLS]

@Daipot

 

[Sawney_bean]

Got this the other day.
Just what i needed for checking the temp in the res so I don't have to reach in with the pen one.

Res temp sits at around 20 - 21°c
The small water pump that's going 24/7 is generating heat,
I attached a bit of tubing to the end of the pump that goes out the res to aerate the water.
Want to attach a water butt tap on the res too so I can take the water from thier if hand feeding.View attachment 1489380

ah a covid tester lol

 

[NORB YIPPLS]

Day 9
Got a few with minor yellowing on the leafs,
would that mean the lightmix was abit hot?
Got my Biotabs here and ready to drop them in the pots but the slight yellow got me worried that if I put them in now it might be too hot and think hold back another week or a few days before I add them.

 

[DCLXVI]

Hmm, the BBLM has enough nutrients in it to last at least the first few weeks. What is the pH of your water?

 

[NORB YIPPLS]

Hmm, the BBLM has enough nutrients in it to last at least the first few weeks. What is the pH of your water?

Thats what I'm thinking too about the LM,
I did test the drippers out abit early on day 4 or 5 and maybe I overwatered them, lol
Didn't check the Ph