New Grower InkAddicts perpetual magical grow garden

Never clumps in my res at the end. Only atan brown stain. Last good sip grow the res was packed full of roots. Like dwc...just don't want to feed them hard. Had algae in the res a few runs back. Roots didn't like that and plants did not reach potential. Newest sips are banging. They just hit flower and might tickle the lights by harvest time
What do you keep your res pH at...
 
This has been happening everytime in my sips soon as they hit flower.... I don't understand it.... What's the pH range for peat? @Jpkindbud you use mc and sips plus peat based soil.. I was thinking you said 6-6.3... thanks

I dont have a pH meter, I just check my local water supply measuements every now and again, as you can see my pH is pretty high, but I dont add anything to counter this. Just straight from the tap.

maybe I should try and get it down a little though..... but then again.
Damn now I read through peoples comments I am wondering how much the actual nutrients and additives change pH levels, maybe I should get a meter.... maybe, maybe..... maybe............

Water quality measurement results 1st quarter 2022
What have we measured?Measuring unitLowest measuredMeasured on averageHighest measuredLegal minimumLegal maximum
Aluminiumµg / l1.124.0200
Arsenicµg / l0.30.91.610
Boormg/l0,0200,0300.0300.5
Calciummg/l39.6642.4348.22
Chloridemg/l536471150**
carbon dioxidemg/l2.53.75.6
Carbonatemg/l< 5< 5< 5
Buyerµg / l< 0.51.21.8
ConductivitymS/m45.751.255.2<125
Fluoridemg/l0.060,100.131.0
Ironmg/l< 0.005< 0.0050.0100.2
TurbidityFTU< 0.03< 0.030.061
Odorabsentabsentabsent****
hydrogen carbonatemg/l167186212>60
Kwikµg / l< 0.01< 0.01< 0.011.0
Total hardnessmmol/l1.321.411.49>1
Total hardness°D7,47,98,3>5.6
Color intensitymg/l Pt< 11320
Magnesiummg/l5.98.510.2
Manganesemg/l< 0.005< 0.0050.0100.05
Sodiummg/l49,063,072.1150
Ammoniummg/l NH4< 0.02< 0.020.030.2
Nitriet (no2/l)mg/l NO2< 0.007< 0.007< 0.0070.1
Nitraat (no3/l)mg/l NO34.125.457.0850
Oxygenmg/l8.411.815.7>2
Storiesµg / l< 0.2< 0.2< 0.210
Acidity calculatedpH7,908.068.207.09.5
Orthofosfaat (po4/l)mg/l PO4< 0.06< 0.06< 0.06
Seleniumµg / l< 0.5< 0.5< 0.510
Saturation Index calculatedpH0.150.230.37> -0.2
Tasteabsentabsentabsent****
sulfatemg/l62650150
Temperature°C5.18.312.125
Organic carbon totalmg/l1.132.734.47****
Aeromonaskve / 100 ml0171000
Colikve / 100 ml001 *10
Clostridium perfringenskve / 100 ml0000
Escherichia coli - confirmedkve / 100 ml0000
Enterococcenkve / 100 ml0000
Koloniegetal-gp-22kve / ml0378100***
Legionellakve / l<100<100<100<100
 
Last edited:
Daily journal....
Good morning afn.... I got alot going on now... Just hope everything goes great....
Day59/49/44/4/2
Temp/humidity= screenshot
Screenshot_20220620-054936~2.png
IMG_20220620_054743370~2.jpg
IMG_20220620_054625049~2.jpg
IMG_20220620_054454824~2.jpg
IMG_20220620_054339029~2.jpg
Screenshot_20220620-052945~2.png
IMG_20220620_052144884~2.jpg
IMG_20220620_051930008~3.jpg
IMG_20220620_051437414~3.jpg
IMG_20220620_051138283~3.jpg
IMG_20220620_050933673~3.jpg
IMG_20220620_050709030~3.jpg
IMG_20220620_050412235~3.jpg
IMG_20220620_050057966~4.jpg
IMG_20220620_052430093~2.jpg
 
Last edited:
chase what did you but for wire and how did you do it? im not experienced at all with regular electric stuff.....
 
I cut and spliced where the wire comes out of the driver and into the light.... I took the wires that matched color and if they didn't I just used say red as a white... Put the wire into those connector withe the extension wire I bought... And Wala it worked... It's not hard... I'm not good with electric stuff either...
Screenshot_20220620-180037.png
Screenshot_20220620-175913.png
 
Back
Top