Indoor Bob's Mars Hydro adventure, growing in a TS1000+60x60 Complete Tent Kits

[Bob's Auto's]

Hey growers Bob here with another update for ya

The emergence of the massive foliage has humidity spiking inside the tent. This morning at 9 O'clock eveything was nice and dandy and after that it went up like a rocket. By the end of my workday it sat at 84%, so that wasn't going to cut it!! To the tent I went...

I upped the extraction quite a bit...

I knew this would cool the tent so I also upped the Wattage on the TS-1000. Which, in hind sight was a bit to much. So I went back and dialed the knob back a 'notch'.

And after some stabilizing this resulted in the following values

I also connected the second tray to the water tank...

And checked if it worked

And finally I changed the camera's position as the smaller plants get completely outmaneuvered by miss White Widow which is growing like a moth3rF#cker and proving Antonio's point, in that even a monkey can be thought how to grow with BioTabs

And let's not forget the time lapse. A last time from the left side of the tent.







I hope you enjoyed todays post.

Regards,

Bob

 

[Bob's Auto's]

Hey AFN Fam


All is well inside the tent. The plants are growing superfast now. Drinking, between the four of them 10L or 2.6Gallon every two days!!

The speed of the extraction fan is still the same as a couple of day ago...

As is the wattage of the TS-1000.

This results in the following value's...

No time lapse today as my storage quota for this week has run dry on Vimeo...But I still hope that you guys enjoyed todays post.


Regards,

Bob

 

[DCLXVI]

Yes sir, nice update. I like that you included shots of the dials. A good reference point.

 

[Bob's Auto's]

Yes sir, nice update. I like that you included shots of the dials. A good reference point.

Then you're gonna love this update, cause I need a couple of people to put on their thinking cap on and give some advise...

Humidity started spiking again...

...so I turned the extraction fan's dial up...

...which in turn lowered the temperature, so I had to set the TS-1000 to it's maximum.

So now I'm stuck at 23°C and barely at the right VPD. Need to find a way to lower humidity without lowering the temperature...Mmmhmm....

 

[DCLXVI]

Need a dehumidifier outside the tent so it pulls in dry air.

 

[Bob's Auto's]

Need a dehumidifier outside the tent so it pulls in dry air.

That's something I can't do brother. Electricity cost 0.27€/kWh where I live
Also humidity in the lung room sits between 48-49%, but the temperature is more dependent on the weather...It's 19°C now and I need the heat from the already efficient light to get it to where I need it to be. For now it's back at 24.1°C / 75.3°F, but would rather have it at 25-26°C /77-79°F
I could install a couple of my older 50W cobs I made, they can raise the temp...I can even choose the light color as I have three different kinds of Cobs. (6000-6500K, 2900-3100K or a blurple at 380-840nm). Which ones would be best for my situation?

 

[Susitna]

That's something I can't do brother. Electricity cost 0.27€/kWh where I live
Also humidity in the lung room sits between 48-49%, but the temperature is more dependent on the weather...It's 19°C now and I need the heat from the already efficient light to get it to where I need it to be. For now it's back at 24.1°C / 75.3°F, but would rather have it at 25-26°C /77-79°F
I could install a couple of my older 50W cobs I made, they can raise the temp...I can even choose the light color as I have three different kinds of Cobs. (6000-6500K, 2900-3100K or a blurple at 380-840nm). Which ones would be best for my situation?

I would say 2900-3100k...but Don't worry too much abou vpd, your plant's will figure it out. Unless you're running some very tight tolerance, they will adjust on their own and you won't notice. As long as they have enough water they should be good.

 

[DCLXVI]

Shoot I don't know then..... And wow, that electric price... ugh.

 

[Bob's Auto's]

I would say 2900-3100k...but Don't worry too much abou vpd, your plant's will figure it out. Unless you're running some very tight tolerance, they will adjust on their own and you won't notice. As long as they have enough water they should be good.

Might build a frame to put around of the TS-1000, then I can two, four or even eight extra 50W cobs. But as you said, they are fine now and the temperature swings between 23 and 26°C so...

Shoot I don't know then..... And wow, that electric price... ugh.

Yeah, didn't you know, I'm a cheapskate
I do have something special for today... Only one time lapse... Speed = 120fps, timeframe 30 days...Are you ready...Set...GO!!!









@JSH1973 @Suki813 @St. Tom @Trichome farmer @pop22 @blue @WildBill @nizmoKush @MassMom @Seedstockers-Mark @Jean-O @Antonio_DutchPassion @TheMongol

 

[Bob's Auto's]

Hey growers,

Hope ya'll had a fine weekend. Mine was quite uneventful as I'm currently dealing with backpain issues. Done my first kine today, looking forward to the next sessions.
But enough about me. It's the ladies you're all interested in aren't you
Well, as you guys might have guessed...Everything is going super!!

Light at it's miximum...Good for the plants and good for the temperature inside the tent. Maybe stupid to say, but I expected the light to give off more heat...

Sorry for the out of focus, but you get the jest. Extraction has again put a bit higher to keep up with the amount of leaf surface and therefor the amount of water the needs to get evacuated from the tent. They are now on 10L / day and a half. Really need to connect that original tank...

As you can see everything is "in spec" and that's how I like it. In the greenhouse I have almost no control over the temperature let alone the humidity, so when I get the chance to do that indoors I'm sure to do my best te keep everything in check.

Look at this forrest. Almost can't see where the White Widow ends en where the Night Queen begins...

So this is the larger/older Night Queen from another side...

Followed not far behind by the younger Night Queens. Looks like these a more vigorous then the older on or is this just me?

An finally another time lapse. Speed = 25fps, timeframe = 50hours. Enjoy!!





Regards,

Bob