You cant cut the plant out whole, but thats a pain in the ass anyway, just clip the branches where they come thru the net and lift it off after, if it gets covered in resin ill just toss it, i got a whole roll and it was super cheap like 50 ft x 2 ft.That sounds perfect, do you think you'll be able to cut the ladies free at the end with the right tools, that would be a big plus over my heavy rackThe biggest issue I have is cleaning it after each use
![]()
I'm going to try a double screen with Vivosun 3.5" netting, offset with the zip ties.
No idea if it will work. We need 2" or 2.5" inexpensive and non-elastic netting.
I couldn't find any so I made my own with a PVC frame and nylon string I went 2.5". I had everything I needed besides the string so it cost me like $6-8 besides that all you need is 3/4 pvc pipe and fittings and 1" dry wall screws. Then I just zip tied the frame to the tent poles
I might do the same. Has 2.5" spacing worked well for you Dab?
Thanks DOA! I will do my current seedlings' light similarly. Had too much light on them last grow and the main stem had no reason to stretch. It was so short and woody, at top-over time it ended up on the side of the block at a 45 degree angle. Will also use plant ties
to hold the 'top-over' wire tight against the stem below the bend, to keep it straight and centered on the block.
The first scrog i ever ran i did the same!I couldn't find any so I made my own with a PVC frame and nylon string I went 2.5". I had everything I needed besides the string so it cost me like $6-8 besides that all you need is 3/4 pvc pipe and fittings and 1" dry wall screws. Then I just zip tied the frame to the tent poles
pH has been 5.9-6.2 since day 1.