Dutch Passion Scotties First NFT Photo Smash Courtesy of Dutch Passion

[bigbadjock]

Bro cornys a mad diy chick shel teaccch you brooo trust im gunna get her make mine hahaha or il jus buy cobs straight off the net

Sent from my SM-G920F using Tapatalk

 

[cornell584]

30 quid ! are you havin a laugh? nae way, how the you hell do you do that for 30 sheets. canny even get the bairns trainers for that these days. my lights are 270w draw how much could i fit in them? id rather spend 90 and get 210
: )

It might be slightly more, i paid £15 each for the cob chips (citizen CLU048 1212 3500k) £4 each for the cob holders (ideal), i had some wire in the tool box but only cost couple of quid and BOOM bobs your uncle and fannys your aunt lol

Check this video out mate, i honestly had no idea what i was doing and still managed to pull it off now I'm making a bigger one with 5 cobs in the red dots are where the cobs will be going

Boo'sBuds[emoji271] https://www.autoflower.org/index.php?threads/61958/

 

[EvilScotsman]

At the mo.just running one tent so 600hps 2x500led and 2x250 in 1.5x1.5m tent

Sent from my SM-G930F using Tapatalk

haha fuckin hell mate i thought i was over doing it with 810. your off your head : )

 

[EvilScotsman]

It might be slightly more, i paid £15 each for the cob chips (citizen CLU048 1212 3500k) £4 each for the cob holders (ideal), i had some wire in the tool box but only cost couple of quid and BOOM bobs your uncle and fannys your aunt lol

Check this video out mate, i honestly had no idea what i was doing and still managed to pull it off now I'm making a bigger one with 5 cobs in the red dots are where the cobs will be going

Boo'sBuds[emoji271] https://www.autoflower.org/index.php?threads/61958/

ahh so that was a 200w draw light and he said you can run 200w cob from it. not sure why that surprises me lol. ive got another marshy en route in a few weeks so i might aswell give it a bash. fill one with as close to 270 as i can get it and put that in the middle with blurples iether side. ill speak to bigsmo about it and see what he says. never realised it was that cheap : )

 

[cornell584]

ahh so that was a 200w draw light and he said you can run 200w cob from it. not sure why that surprises me lol. ive got another marshy en route in a few weeks so i might aswell give it a bash. fill one with as close to 270 as i can get it and put that in the middle with blurples iether side. ill speak to bigsmo about it and see what he says. never realised it was that cheap : )

Good man! That's what i like to hear yeah bigsmo's your man, top bloke for helping others you can get the cob chips & holder's on ebay mate, give me a shout if you need help with suppliers or anything mate

Boo'sBuds[emoji271] https://www.autoflower.org/index.php?threads/61958/

 

[EvilScotsman]

Good man! That's what i like to hear yeah bigsmo's your man, top bloke for helping others you can get the cob chips & holder's on ebay mate, give me a shout if you need help with suppliers or anything mate

Boo'sBuds[emoji271] https://www.autoflower.org/index.php?threads/61958/

gracias chica : ) ive seen quite a few folk build their own from scratch but thats too much for me. i was thinkin about it for a while but your way sounds much better.
@BigSm0 what you reckon mate. as our guru of all things luminessant, is it a feasible option for me to rig out an old model mars 600 that i tested at 270w draw with 270 watt worth of cobs? ill have a sparky on hand to do the fitting so just need to know if it will work. or whats the max i could put in? any advice for blurpler on the convert? : )

 

[BigSm0]

gracias chica : ) ive seen quite a few folk build their own from scratch but thats too much for me. i was thinkin about it for a while but your way sounds much better.
@BigSm0 what you reckon mate. as our guru of all things luminessant, is it a feasible option for me to rig out an old model mars 600 that i tested at 270w draw with 270 watt worth of cobs? ill have a sparky on hand to do the fitting so just need to know if it will work. or whats the max i could put in? any advice for blurpler on the convert? : )

The best advice is to stop wasting wattage to heat and waste it on light. 270 wall watts was giving you around 50 par watts. That can be done with 100 watts of cobs.

Wattage is heat and light but not the same amount of light depending on the source. Look at wattage like fuel. One gallon doesn’t mean you can drive 50 miles right? with the right car you can but not all cars get 50 miles per gallon. What is a gallon equivalent for mileage? The reason for all this is wattage is as vague as a gallon of gas. Some cars are fuel efficient, some lights are photon efficient. If your doing a lot of traveling it makes sense to get a Prius, if your growing it makes sense to get a cob.

Hope I helped, the short answer is as long as your putting in 100 watts of cobs your achieving the same amount of light while saving wattage. If your putting in 270 watts of cobs your more than doubling the amount of light. Either way you win with efficiency and efficiency is best had with cobs.

 

[EvilScotsman]

The best advice is to stop wasting wattage to heat and waste it on light. 270 wall watts was giving you around 50 par watts. That can be done with 100 watts of cobs.

Wattage is heat and light but not the same amount of light depending on the source. Look at wattage like fuel. One gallon doesn’t mean you can drive 50 miles right? with the right car you can but not all cars get 50 miles per gallon. What is a gallon equivalent for mileage? The reason for all this is wattage is as vague as a gallon of gas. Some cars are fuel efficient, some lights are photon efficient. If your doing a lot of traveling it makes sense to get a Prius, if your growing it makes sense to get a cob.

Hope I helped, the short answer is as long as your putting in 100 watts of cobs your achieving the same amount of light while saving wattage. If your putting in 270 watts of cobs your more than doubling the amount of light. Either way you win with efficiency and efficiency is best had with cobs.

thanks for that smo. your some guy like. always got time to answer our queries. : )
i just wasnt wasnt sure the mars frame could handle that much cob. sounded too good to be true but if you say it can be done then im going for it. think i’ll aim for about 250w worth of bloom spec on my first experiment and see how i get on. got plenty blurples there for vegging so ill just do it that way. : ) cant believe ive finally been talked into this haha. vive la revolution!

 

[cornell584]

thanks for that smo. your some guy like. always got time to answer our queries. : )
i just wasnt wasnt sure the mars frame could handle that much cob. sounded too good to be true but if you say it can be done then im going for it. think i’ll aim for about 250w worth of bloom spec on my first experiment and see how i get on. got plenty blurples there for vegging so ill just do it that way. : ) cant believe ive finally been talked into this haha. vive la revolution!

Good man! Sounds like a wicked plan can't wait to see what you come up with!
Loved smo's explanation [emoji23] top man!

Boo'sBuds[emoji271] https://www.autoflower.org/index.php?threads/61958/

 

[bigbadjock]

thanks for that smo. your some guy like. always got time to answer our queries. : )
i just wasnt wasnt sure the mars frame could handle that much cob. sounded too good to be true but if you say it can be done then im going for it. think i’ll aim for about 250w worth of bloom spec on my first experiment and see how i get on. got plenty blurples there for vegging so ill just do it that way. : ) cant believe ive finally been talked into this haha. vive la revolution!

Iv spent the whole night researching it and to do what tha dude did in cornells video without actually buying a mars 2 400w il just buy 3 150w drivers as is in the mars 2 400w and then use old heatsinks from processors in pcs 1 heat sink per cob chip will do and bang thays 6 cobs right there 2x 40 volt cob per 150w driver is pretty much what the guy in the video done he said make sure u dont go over chip size 20-40volts well best cree chips runs at 38.5volts bang on ehh ... hmmmm this way i can stealth grow in my wardrop social services can suck my tadjer man no light like a hps or a led and no heat issues all id have do is rig the poor wardobe up with a filter kit and 1 or 2 of these dual cob lights im gunna make and just have 1 or 2 plants in there under all that rawwwww ass light hmmmmm

Sent from my SM-G920F using Tapatalk