EverythingsHazy's Breeding Thread

[EverythingsHazy]

DIY Mod time!

Can both of these power adapters be connected to the same clips on the generator at the same time, and just plug in the new 5v one if I electrical tape it on, or do I have to remove the 24v one? It's soldered on. Also, what would happen if both were plugged in at the same time? Would it add up the 5v and 24v? or break? lol

I only ask if they can both be connected because I wanted to test how it worked with the 5v adapter before doing any soldering mods or removing the 24v one.

I'd like to compare the finished cs product over a few days before deciding which adapter worked better.

The amber cs works absolutely fine for plants (using it now), but if I can try it both ways, why not? I do believe that clear cs is smaller particles, and if I was going to ingest it, that is what I would use, but for plants, amber cs works perfectly well. The particles while not as small as the clear ones, are still more than small enough to seep into the plant cells without burning it even after repeated doses throughout the day, covering the tops and bottoms of every part of the plant including fan leaves.
In fact, aside from making pollen sacs instead of calyxes with pistils, it is a super healthy plant! Considering the fact that it is in a very small pot (well under 1 gal), it is 10" tall with 5-6 nodes and then the main pollen sac "cola" lol

Proof:

 

[Epic Genetics]

long as they arent both plugged in i cant see why not , i wouldnt go out of my way to test that theory though , ive zapped myself too many times over the years , me and electricity dont get along so well

lol@ plugging them both in

peace

- - - Updated - - -

long as they arent both plugged in i cant see why not , i wouldnt go out of my way to test that theory though , ive zapped myself too many times over the years , me and electricity dont get along so well

lol@ plugging them both in

peace

 

[EverythingsHazy]

long as they arent both plugged in i cant see why not , i wouldnt go out of my way to test that theory though , ive zapped myself too many times over the years , me and electricity dont get along so well

lol@ plugging them both in

peace

hahaha smh ive had a couple outlet shocks too.. weirdest was when my arm just kinda tensed and vibrated but i couldnt pull it away for a second and then it was over. lol was fine after. or at least I think so anyway >.>

Update: Got a fish tank air pump, tubing, and ain airstone and am making a batch now before modding just to see how the stone affects it if at all since I know how it should behave with the current voltage. Makes sensew that the little cloud of ions/colloids being mixed around and away from the electrodes would help prevent them from agglomerating during creation.

Eventually planning on making the pump and 5v adapter permanent fixtures for the generator box.


Started at 0ppm about 10 minutes ago.

Update:
3hr: 1ppm clear, discoloration of wires was wiped a few times but no big chunks of buildup or cloud forming aorund them with the bubbler in there. Now this is already different because it had a 6ppm reading the last time at the 3hr mark. HOWEVER, what is even weirder, is that the laser shows already, and has been showing since the first hour when it was still 0ppm on the tds meter, but not before the cs generator was added to it, so the water wasn't dirty to start or anything. Same gallon bottle actually. New, rinsed out mason jar, since it kinda smells when first opened. This is kind of strange, because now I don't know when it is done. I don't know if it would ever even hit that ppm, or if that is needed once it has enough silver in it to show a laser beam with the Tyndall effect.

 

[EverythingsHazy]

Update:
3hr: 1ppm clear, discoloration of wires was wiped a few times but no big chunks of buildup or cloud forming aorund them with the bubbler in there. Now this is already different because it had a 6ppm reading the last time at the 3hr mark. HOWEVER, what is even weirder, is that the laser shows already, and has been showing since the first hour when it was still 0ppm on the tds meter, but not before the cs generator was added to it, so the water wasn't dirty to start or anything. Same gallon bottle actually. New, rinsed out mason jar, since it kinda smells when first opened. This is kind of strange, because now I don't know when it is done. I don't know if it would ever even hit that ppm, or if that is needed once it has enough silver in it to show a laser beam with the Tyndall effect.

Wtf? It has a little less water in the jar thanth elast time, so less of the electdes are submerged but it iss sill at 1-2ppm. Crystal clear. GOing to leave it overnight. The air pump makes a huge difference. hopefully more than just timing.


**Update**
7hrs: 7ppm, still crystal clear. Also re-bent an hour ago (raised up 3 ppm but the one wire got some buildup finally (been wiped almost every hour but no real buildup just discoloration till now) the wires so they are slightly closer and more is submerged (had to use less water since it keeps bubbling onto the generator and also out a very little bit.

 

[Epic Genetics]

ehazy, some things come to mind , when checking with a lazer pointer , make sure the air pump has been off for a while , the tiny air molicules or w/e will trick you into thinking you see silver sparkles in the beam

as for bubbling over , yeah thats a bitch , i had to go buy the smallest piece of crap air pump i could find when i switched from 1 gallon to one pint

find a whatever you call it that connects to your airline ,,, a splitter , have it split into 2 , but only have one actually go into your water

and yeah , my wires dont get dirty until the 6-8 hr mark and never a gunky buildup when using an airstone , after the 6-8 hr mark i begin wiping the wires as needed , approx every hr or 2 , i usually end it all by the 12 hr mark

peace

 

[NEimmaculates]

eHazy brother, how did it come out? It sorta sounds like something's wrong with the electrical current. Did any thing get moved around or maybe jiggled loose when you opened the box up? I think if one of your connections were loose it would explain the issue you are having ATM. Don't know just a thought. Do you have a voltage meter? You can get a cheep one for under $10. It's a good thing to have anyway. Makes trouble shooting electrical issues a hell of a lot easier.

 

[pop22]

hahaha smh ive had a couple outlet shocks too.. weirdest was when my arm just kinda tensed and vibrated but i couldnt pull it away for a second and then it was over. lol was fine after. or at least I think so anyway >.>

Update: Got a fish tank air pump, tubing, and ain airstone and am making a batch now before modding just to see how the stone affects it if at all since I know how it should behave with the current voltage. Makes sensew that the little cloud of ions/colloids being mixed around and away from the electrodes would help prevent them from agglomerating during creation.

Eventually planning on making the pump and 5v adapter permanent fixtures for the generator box.


Started at 0ppm about 10 minutes ago.


Update:
3hr: 1ppm clear, discoloration of wires was wiped a few times but no big chunks of buildup or cloud forming aorund them with the bubbler in there. Now this is already different because it had a 6ppm reading the last time at the 3hr mark. HOWEVER, what is even weirder, is that the laser shows already, and has been showing since the first hour when it was still 0ppm on the tds meter, but not before the cs generator was added to it, so the water wasn't dirty to start or anything. Same gallon bottle actually. New, rinsed out mason jar, since it kinda smells when first opened. This is kind of strange, because now I don't know when it is done. I don't know if it would ever even hit that ppm, or if that is needed once it has enough silver in it to show a laser beam with the Tyndall effect.

Nice to see someone else experimenting with this!

 

[Epic Genetics]

eHazy brother, how did it come out? It sorta sounds like something's wrong with the electrical current. Did any thing get moved around or maybe jiggled loose when you opened the box up? I think if one of your connections were loose it would explain the issue you are having ATM. Don't know just a thought. Do you have a voltage meter? You can get a cheep one for under $10. It's a good thing to have anyway. Makes trouble shooting electrical issues a hell of a lot easier.

ive brainstormed with people trying to troubleshoot issues a lot , one of them was a member using a power adaptor that ran at whatever voltage but then shut off or way down after a couple hours , maybe even less time

the only way they figured it out was with a voltage metre and a constant watch of it , they could only ever get to 5 ppm until finding/using a different power supply

not the same , but similar to what you are saying

peace

 

[EverythingsHazy]

I turned it off while I slept and the 7ppm colloidal solver is still clear. Just put it to run again for a few more hours until it hits at least 15ppm like the previous batches.
I've still never seen anyone else ever exceed 50ppm tho, NEimmaculates. 70 is crazy!
Esp using a lower voltage. Mine is 24v with 1000ma.

In the ten minutes that passed making this post and fidgeting with my generator, it rose to 8ppm and the wire did colored so I wiped it. It should hopefully be picking up speed now.


Also, have any of you ever tried "seeding" your cs batches with a little bit of cs from the previous batch. If you start with a ppm of like 5, it should finish the process much faster each time. Any thoughts?

 

[Epic Genetics]

I turned it off while I slept and the 7ppm colloidal solver is still clear. Just put it to run again for a few more hours until it hits at least 15ppm like the previous batches.
I've still never seen anyone else ever exceed 50ppm tho, NEimmaculates. 70 is crazy!
Esp using a lower voltage. Mine is 24v with 1000ma.

In the ten minutes that passed making this post and fidgeting with my generator, it rose to 8ppm and the wire did colored so I wiped it. It should hopefully be picking up speed now.


Also, have any of you ever tried "seeding" your cs batches with a little bit of cs from the previous batch. If you start with a ppm of like 5, it should finish the process much faster each time. Any thoughts?

seeding it is a bad idea , as the ppm's rise so does the size of the particles being made , if you were to seed a batch you would miss out on the earlier small particles

i wouldnt wipe the wires just because of discolouration , we want that , we just dont want gunk

when i used to properly test mine i found it hard to reach or pass 45 ppm , but thats making sure i wasnt brewing a thick paste or anything like that lol , i think i could prolly exceed 45 , but ive not gone out of my way to do so cause i then wouldnt use it on my plants or myself , might try some time soon though

peace