Grow Room DIY Micro Box(first Auto grow)42cmWx32cmDx50cmH

[Dion]

So I just wanna put up this thread for now and show you all what im up to at the moment.

Got an ikea malm 2 draw for a tenner second hand and began the adventure here is where i am at as of today

i dropped the bottom drawer down about 5cm to get some more room and put in the support beams( a bit crooked0 to put the pot on, the light trap will go underneath.


I have a SST-FM121(http://www.silverstonetek.com/product.php?pid=118) for exhaust and will do a pancake style carbon scrubber.

Lighting will be DIY led ( i have a ton of older tech so ill throw it in here, PPFD will be at around 800 and thats gonna take around 60w to get there.)

medium will be plagron promix fertilised with worm hummus and supermix additives. I also have some chelated iron, calcium carbonate and magnesium sulphate(DIY calmag =D) and potassium sulphate for a bloom boost if needed.


Thinking of running polarlight #2 from dutch passion or Haze Automatic by Dinefem, what do you think?


ok did i bit more work today

thinkin of putting in a scrog screen too
ok more later

peace

 

[Dion]

reserved for build

 

[Dion]

reserved for build

 

[Dion]

reserved for build

 

[Dion]

reserved for build

 

[Dion]

i wasnt sure how many pics i could put in a post so i guess ill just use this post for the electronics (lights fans ect)

I finished the lights for the cab today, I just hap-hazardly adapted them from what i had in older chips


8x surexi F1 modules from illumitex and 1x cree cxa 2530 4000K cob

 

[G.Leave]

Obviously you are a sativa lover. You might find it difficult fitting in strains like polarlights and delahaze due to their large stretches.

 

[HMR]

Looks good man, I'm looking forward to see this build ;D

 

[Dion]

Obviously you are a sativa lover. You might find it difficult fitting in strains like polarlights and delahaze due to their large stretches.

thanks for the feedback
was thinking to use 8L(2 gallon) pots or smaller to keep them short?

 

[G.Leave]

thanks for the feedback
was thinking to use 8L(2 gallon) pots or smaller to keep them short?

To a point that will work. Though if you check out my current grow you will see that pot size only has a fair restriction to plant height. If you do heavy lst and/or supercropping you might be able to keep height under control, depending on skill and planning. https://www.autoflower.org/threads/...on-grow-by-discretepete-and-greenskell.49456/