are you exhausting air out of your grow space? if you are I'm not sure that will do anything. I am looking in to this myself too so I am not expert. But I think you should only use it if you are not exhausting.
I thought it just needed a fan blowing at it and away from the carbo filter not sure myself the company has YouTube videos that might help if you haven't looked already I also thought you can hang it or place it on the floor like I have and shake it once per day I'll let you know if I see a difference in growth rate but my experience is smaller than most
don't get into any co2 now... your setup is not set-up for running co2 , you'd get zero benefit running the environment you currently using.. I would hate to see have spend money on something that will not work for ya, besides it's a little late to start with co2.. your running extraction full time, so no possible way any useful levels can build up, your running an open tent again no possible ways levels can build up, next co2 only works if your using in correct environment which is temps & all that, you'd need run sealed tent, zero to no extraction or self-contained to tent somehow, but it doesn't work well with tents...your temps for need come way up to 88-90degree and you'd have figure out how to increase humidity to compensate for the extra heat... I surely don't recommend getting into co2 until you have a better understanding of the growing...it's a big step...
Update on my northern lights she's coming on nicely could be tidyer and she's looking a really dark green colour but bud formation is coming on nicely she's on day 55
also in a sealed environment your power cost will go up greatly,in sealed units humidity builds up so dehumidifiers are a must and them draw on average of around 450w(for safety reason's I'd never hook up a dehumidifier to same power strip as the grow lights/fans/extraction) Remember everything you add to a power strip or wall outlet can run up to a max of like 15amps you don't want run that to close to the 15amps(you should leave about 25% of available amps) I separate my lighting/extraction from everything else to keep the amp draw as low as possible I have one of the Kill-a-watt thingys so I know just how much I'm drawing from each and safest way to plug things in without overloading breaker/fuses/power strip/etc...
Hey everyone update on my northern lights she's coming on nicely needs another trim and a bit of bending but she's just getting over a bit of nute burn atm I will update again at weekend with the rest of the clan let us know how you think she's coming on day 57 ish
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.