UPDATED. More pics. Getting worse Mephisto grow Organic leaves turning yellow and rust spots in flower

[mlorE]

Yes after testing all your pH now go to, PPMs like stated above, I bet they are way off. Also could you snap a new pic that could also help

I put new pics up from today on the second page

 

[derek420colorado]

I put new pics up from today on the second page

Ah my bad I will go back and look

 

[Proph]

Tap water is fine.. Just test the ppms of the plain water first sp you know what number to subtract... So let's say the water only is 200ppm.. Then you use it to water the soil until run off.. Let's say the run off ppm is 800.. Just subtract 200 to get the in pot ppm of 600.. It's not a perfect science but it will put you in the ballpark.

 

[mlorE]

Tap water is fine.. Just test the ppms of the plain water first sp you know what number to subtract... So let's say the water only is 200ppm.. Then you use it to water the soil until run off.. Let's say the run off ppm is 800.. Just subtract 200 to get the in pot ppm of 600.. It's not a perfect science but it will put you in the ballpark.

Okay sweet.
Should I ph down my tap water, check ppm, then water through till I get a few cups of run off then use a cup after that and see what ppm comes up then minus my original ppm reading.
Also my pots are still a bit on the heavy side. Should I wait till my next watering? I think it should be tomorrow

I got a feeling this could be my problem though. Reason being my tap water has quite a high ppm and then I’m adding my nutes on top of that. I dunno, just a feeling.
I appreciate all the help!

 

[Fitzy]

Don't let any runoff get away it's important to get the very beginnin/start of it so you get a good reading and before watering always ph even for flushing and test ppm of water used before and after very important but if it is high 1000ppm ect and ur feed is only @ 600ppm that is telling u the plant has too much I almost bet there 1000 to 1500ppm I would almost put money on th@t and I've only bet for real like 2 times (casino) but still also like mentioned each plant is very different at least that's what I see weather feed structure ect anyway check that out report back when u can and if u can correct it u will get even better results than now.

 

[mlorE]

Don't let any runoff get away it's important to get the very beginnin/start of it so you get a good reading and before watering always ph even for flushing and test ppm of water used before and after very important but if it is high 1000ppm ect and ur feed is only @ 600ppm that is telling u the plant has too much I almost bet there 1000 to 1500ppm I would almost put money on th@t and I've only bet for real like 2 times (casino) but still also like mentioned each plant is very different at least that's what I see weather feed structure ect anyway check that out report back when u can and if u can correct it u will get even better results than now.

If my ppm is too high. How would I fix it? With a heavy watering of ph water?

My 3BOG and Orange diesel look nearly done under the scope. 50-60% cloudy plus they are swelling nicely and more scents are coming through.
Hopefully I should still get a tasty harvest.
I think it’s water time tonight. So readings to follow soon.

 

[derek420colorado]

If my ppm is too high. How would I fix it? With a heavy watering of ph water?

My 3BOG and Orange diesel look nearly done under the scope. 50-60% cloudy plus they are swelling nicely and more scents are coming through.
Hopefully I should still get a tasty harvest.
I think it’s water time tonight. So readings to follow soon.

Yes if your ppms are too high just flush with pH’d water

 

[Fitzy]

If my ppm is too high. How would I fix it? With a heavy watering of ph water?

My 3BOG and Orange diesel look nearly done under the scope. 50-60% cloudy plus they are swelling nicely and more scents are coming through.
Hopefully I should still get a tasty harvest.
I think it’s water time tonight. So readings to follow soon.

It will make a difference I say flush them and see where there@ I wouldn't give any nutes till u find that out also I would check the others just to no where they are also when I used bottle nutes that's what I would do it will luk if u can feed more on the other ones and if u continue with a specific strain u will be able to get a good feed schedule down for them I've just started the last 3 grows using all dry organic amendments and I love it so easy only ph'ed water and I've got some of the absolute best quality in flavor that I've got in any other methods I've tried. Also if u can I would advise a staggered harvest it's vey much worth it and also allows u to try different amounts of amber so u can see how u prefer each strain I personally wait for 90%ish cloudy as that's about the best time to harvest for the the more amber the more cbn. Anyhow sending good vibes and karma ur way.

 

[mlorE]

Tap water is fine.. Just test the ppms of the plain water first sp you know what number to subtract... So let's say the water only is 200ppm.. Then you use it to water the soil until run off.. Let's say the run off ppm is 800.. Just subtract 200 to get the in pot ppm of 600.. It's not a perfect science but it will put you in the ballpark.

It will make a difference I say flush them and see where there@ I wouldn't give any nutes till u find that out also I would check the others just to no where they are also when I used bottle nutes that's what I would do it will luk if u can feed more on the other ones and if u continue with a specific strain u will be able to get a good feed schedule down for them I've just started the last 3 grows using all dry organic amendments and I love it so easy only ph'ed water and I've got some of the absolute best quality in flavor that I've got in any other methods I've tried. Also if u can I would advise a staggered harvest it's vey much worth it and also allows u to try different amounts of amber so u can see how u prefer each strain I personally wait for 90%ish cloudy as that's about the best time to harvest for the the more amber the more cbn. Anyhow sending good vibes and karma ur way.

Right. I just done a run off ppm test. They are all over the place.
My tap water was between 250 and 300 ppm
The first few cups of run off came out between 500-800. Then the ones following went all the way up to 1300-1900. I couldn’t believe it. I’ve hardly been feeding them big doses!
I flushed them all through with phed water. And I think I’m just gonna do that till harvest on a few of them as they have got about a week left. Can I start feeding the others low doses? Or should I carry on with phed water?

 

[Proph]

Right. I just done a run off ppm test. They are all over the place.
My tap water was between 250 and 300 ppm
The first few cups of run off came out between 500-800. Then the ones following went all the way up to 1300-1900. I couldn’t believe it. I’ve hardly been feeding them big doses!
I flushed them all through with phed water. And I think I’m just gonna do that till harvest on a few of them as they have got about a week left. Can I start feeding the others low doses? Or should I carry on with phed water?

The ppm fluctuation in the reading is normal. That's why I was saying to dump out the first few cupfuls of run off. The first bit of run off is not a true run off reading.. It's just loose water.. The higher numbers sound legit. It takes a little time to saturate the root zone and get a good reading. A high ppm run off usually happens when plants get bottled nutrients with every watering. If you flush, flush until the ppm readings are in a good/normal range. Make a gallon of what ever you normally feed, then check the ppms of that. This will tell you how to adjust your feeds going forward. For example, if the nutrient mix has a ppm of 1000, then you can probably cut the doasge/ml used, in half. Checking the ppms of your feeds will save you a lot of future head aches. But it sounds like you are on the right track to finding/addressing the issue!!