Fuggzy
Perfectly Flawed
Very nice light a little low on the red spectrum bro but high par value I was thinking of getting one of these and one marshydro to go side by side but it works out cheaper to get two marshydro lights but a very nice light bro
Hey guys, and thanks for the heads up. I didn't mention it here, but I have studied diy led for months, and have tons of 3w chips for customizing the spectrum. Problem is I can't seem to get them done...I have made one setup with the cobs for a micro cab, and in my opinion it rocked the plants under it. (although I may be a bit bias on that, lol)Fuggzy that light looks low on the RED spectrum so if you end up getting it just make sure you use it as a veg light. I think you already mentioned that and then adding it in.
On hand for 3w chips I have:
50 blue 440nm
50 red 625nm
50 "white" 3000k
24 far red 730nm
I also have ~15 random cree and philips 3w, but those are for a specific project.
For cobs I have:
12 Bridgelus vero 10 @ 3000k
12 Bridgelux vero 10 @ 3500k
All the drivers I have where bought to run them at ~40% of max current to increase efficiency. Also the watts I listed for my cobs would be the actual draw which is 20w.
The main reason I want to buy this panel, is to save on the trouble of wiring up 150+ chips. My current setup has very little blue, so this particular panel would fill in some of the spectrum I am missing. Then if I feel it needs to be shifted one way or the other I can just wire up a dozen or 2 chips and customize it.
Heres a few pics of the gear I have to work with...
![DSCN2683[1].JPG DSCN2683[1].JPG](https://www.autoflower.org/data/attachments/369/369923-df473c84885cbebd70c7152489d75db3.jpg?hash=30c8hIhcvr)
![DSCN2685[1].JPG DSCN2685[1].JPG](https://www.autoflower.org/data/attachments/369/369924-7301fbe0deadc1e67a029e6004f1cda2.jpg?hash=cwH74N6twe)
![DSCN2686[1].JPG DSCN2686[1].JPG](https://www.autoflower.org/data/attachments/369/369925-52780947b4782d4b07ac01d01558f458.jpg?hash=UngJR7R4LU)
![DSCN2687[1].JPG DSCN2687[1].JPG](https://www.autoflower.org/data/attachments/369/369926-f0c802045a4cc1b574e9c33915f8c351.jpg?hash=8MgCBFpMwb)
![DSCN2688[1].JPG DSCN2688[1].JPG](https://www.autoflower.org/data/attachments/369/369927-bd0adcb48725f0dddf5df673f6fb3826.jpg?hash=vQrctIcl8N)
Here are some pics of the current micro led... (4 vero 10. 2 @ 3000k, and 2 @ 3500k. Ran at 350ma. ~26.7v * .35a=9.345w *4= 37.38w in 143 sq inches)



And the really thin wires are the molex leads designed for the cob. I know it looks tiny, but it is rated for the current flowing through it.

These are the plant I feel the cobs rocked... Keep in mind they are micros...



At this point, I would pay someone $100 to some solder up all the 3w chips... Sorry for the big ass post guys, stoned, and feeling the LED vibe at the moment. :smoking:
