realcarlos
newbie
As always loving your detailed posts. Thanks for keeping us in the loop
M
micro.grower
Guest
Honestly, I don't know. This will b my first time creating seeds. I want at least twenty f1's, but I think I will be getting that many for sure. Between dragon jem crosses and querkle dragon crosses, I should def have enough to experiment with. Not sure where the crosses will take me, but I will enjoy the ride till the end. Lol. Know what I mean? Thanks for looking and commenting. Lol. Saw dreday lurking so I guess I will be waiting a comment from him soon. Please comment if ya read my thread. All comments are wanted and welcomed. Thanks homies.
M
micro.grower
Guest
Thanks noods. I will try to not disapoint.
I just wanted to put this out there for those who look at my page. For those of you who run a super legit thread on this site. I wanna say thanks for taking the time to put them together. I wish I had the time to go through everyone's thread and comment. There are some awesome flowers being grown on this sight. Occasionally I do get the time to "run" around the forum a bit and comment here and there. . Never as much as I.d like though. So yeah. Lol. I'm stoned and wanted to get that out while I had it on my mind. Thanks again. Later homies.
I just wanted to put this out there for those who look at my page. For those of you who run a super legit thread on this site. I wanna say thanks for taking the time to put them together. I wish I had the time to go through everyone's thread and comment. There are some awesome flowers being grown on this sight. Occasionally I do get the time to "run" around the forum a bit and comment here and there. . Never as much as I.d like though. So yeah. Lol. I'm stoned and wanted to get that out while I had it on my mind. Thanks again. Later homies.
KindredSpirit
AFN New Growers Mod
Yo man things are lookin great :smokebuds:
S
SATIVAbr
Guest
Its not simple to make a LED panel for growing, but its not complicated too.
Its much cheaper make one than buy a working one, and you can make it fit right for your need and space.
In my case, the LEDs refrigeration is 100% separate from my inside of the grow. So the hot air from the LEDs never goes inside the grow. So its easy to control the case temperature.
I will make a DIY, next year, about LED grow panels. :thumbs:
M
micro.grower
Guest
To be honest, I don.t know anything about led.s. if I'd knew how to build one, I would've already it.
I am actually looking into building a new grow box. I.m thinking about using a card board wardrobe moving box. I.ll finish off the grow I have going now, and probably build the box when its over. I will be keeping my biggest case for mothers and clones.
I just got my bulk pack and magic dragons today... yay!
I am actually looking into building a new grow box. I.m thinking about using a card board wardrobe moving box. I.ll finish off the grow I have going now, and probably build the box when its over. I will be keeping my biggest case for mothers and clones.
I just got my bulk pack and magic dragons today... yay!
M
micro.grower
Guest
Well.. started thinking about starting some magic dragons, got side tracked, and built a new mother box. Lol. Went to Kmart looking for some jiffy pucks and ended up in the arts and crafts section staring at cardboard boxes and poster board. Needless to say, I spent fifty bucks on shit like boxes, power strips, Velcro, poster board, tape, and I think a light bulb. Went home and salvaged some fans outta couple of my cases and went to town building. It was fun. I am def. Getting an led panel for it soon... that should finish it off. I ran out of foil tape for the reflector, and I only have 1 x15 watt 6500k cfl in it. Temps are at 67 with room temp being 61. So I.m satisfied. When I get the led's in there, I will start my party cup autoflower sog. But for now, I am just using it to keep my mom alive. I will prolly install a 65watt 6500k cfl from my breeding box, and take out the current cfl I have in the new box. I will take pictures tomorrow. Enjoy these piks of my jems and duurtie still in the flowering case. The two jems have been pollinated by a duurtie male and the "odd" one out of the three is my duurtie fem. She will remain unpollinated.
Attachments
A
Auto-snooch
Guest
Can't wait to see your new grow micro. I like the idea of the mini SoG. Have you ever seen anybody else try it with small autos?
M
micro.grower
Guest
new mother/clone box...
its just as tall as my flowering case and about twice as wide.. the idea behind this was simple.. i need a box to flower my photos, and a bigger veg box for my autos, mother plant, and clones... the case i was using worked perfect for the mother plant, and a few clones at a time, but no real room for anything else...
i ran out of foil tape, so the top of the box still isnt finished yet... i also ran two power strips back to back to be able to add more lights... however, with my box being cardboard, i wanted to see what kind of heat i got off this bulb before i started adding more... but, instead of adding more cfl.s, i am gonna be adding an led panel... just gotta wait till i have the cash. i think overall, this box came out perfect. it took me three hours to plan out and build. being it only cost me 50 bucks for supplies i didnt have, i would say this was def worth the time and effort put into it to build it. i normally wait till i dont have anything growing to work on boxes, but it my patience was low.. lol... i should be good to go now... lol... prolly not though... his was originally gonna be my new flowering box, but due to the lack of high wattage, it will remain as i described it previously... its basically two boxes stacked... the top box houses the lighting and exhaust fans. the bottom box is strictly "cab space". meaning every square inch of it is capable of being used. i lined the inside of the bottom box with poster board... the door is attached by velcro on the front. the are two passive intakes as well.. one on the bottom leftcorner and one the bottom right corner... i made some light traps out of card board to cover all intakes and exhaust openings... i am hoping this box will last me. i also have enough room inside of it to start practicing some dwc if i.d like to... enjoy the piks, and remember, grow boxes do not have to be expensive to make... 50 bucks and a lil ingenuity goes a long ways...
also, you can see how stealth it all looks with the flowering case in front of it... no light leaks out of my closet what so ever... boh cases are running at 67 degrees with it being 63 degrees inside the closet... any questions, feel free to ask... thanks for looking homies...
edit: still considering putting the 65 watt cfl from my breeding case in it... but the led panel is preferred...
its just as tall as my flowering case and about twice as wide.. the idea behind this was simple.. i need a box to flower my photos, and a bigger veg box for my autos, mother plant, and clones... the case i was using worked perfect for the mother plant, and a few clones at a time, but no real room for anything else...
i ran out of foil tape, so the top of the box still isnt finished yet... i also ran two power strips back to back to be able to add more lights... however, with my box being cardboard, i wanted to see what kind of heat i got off this bulb before i started adding more... but, instead of adding more cfl.s, i am gonna be adding an led panel... just gotta wait till i have the cash. i think overall, this box came out perfect. it took me three hours to plan out and build. being it only cost me 50 bucks for supplies i didnt have, i would say this was def worth the time and effort put into it to build it. i normally wait till i dont have anything growing to work on boxes, but it my patience was low.. lol... i should be good to go now... lol... prolly not though... his was originally gonna be my new flowering box, but due to the lack of high wattage, it will remain as i described it previously... its basically two boxes stacked... the top box houses the lighting and exhaust fans. the bottom box is strictly "cab space". meaning every square inch of it is capable of being used. i lined the inside of the bottom box with poster board... the door is attached by velcro on the front. the are two passive intakes as well.. one on the bottom leftcorner and one the bottom right corner... i made some light traps out of card board to cover all intakes and exhaust openings... i am hoping this box will last me. i also have enough room inside of it to start practicing some dwc if i.d like to... enjoy the piks, and remember, grow boxes do not have to be expensive to make... 50 bucks and a lil ingenuity goes a long ways...
also, you can see how stealth it all looks with the flowering case in front of it... no light leaks out of my closet what so ever... boh cases are running at 67 degrees with it being 63 degrees inside the closet... any questions, feel free to ask... thanks for looking homies...
edit: still considering putting the 65 watt cfl from my breeding case in it... but the led panel is preferred...
Attachments
Last edited by a moderator:
Similar threads
