EverythingsHazy's Breeding Thread

[EverythingsHazy]

The cs report.

After a total of 6 hours (with the first hour being on a different outlet I am suspecting might not have worked unless the first hour really is only like 1ppm at this wire distance), it is up to 17 ppm, and clear. Would easily mistake it for water after being decanted and strained through a coffee filter into another mason jar. Some silver particles were starting to build up on the bottom so without an air pump and stone, 17 ppm seems like the max for good particle size. The wires were also cleaned whenever they got discolored without letting much gunk form on them.

Time (+/- 30mins) - ppm

1hr - 0-1ppm *switch outlets after this test*
3hr - 6ppm
4 hr - 9ppm
5 hr - 13ppm
6 hr - 17ppm

Ready to be decanted and filtered.

What was filtered out.

Filtered and jarred. No flash.

With Flash.

Laser test. No flash.

 

[EverythingsHazy]

Overnight color change was pretty mild. Here is the new jar (left) next to the previous batch (right).

 

[Epic Genetics]

i dont understand , im at a total loss as to your colour change , if your silver is pure and your wire is pure , if you store it in the dark at room temp it should remain clear

i realise you use high voltage , but if it doesnt make for a coloured solution when making it i cant understand how it would be cause for change a day or days later

none of it makes sense to me , unless one of 2 things arent what they are advertised to be , and that would be the silver or the water

hopefully it wont matter and the c.s. works perfectly for you

peace

 

[EverythingsHazy]

i dont understand , im at a total loss as to your colour change , if your silver is pure and your wire is pure , if you store it in the dark at room temp it should remain clear

i realise you use high voltage , but if it doesnt make for a coloured solution when making it i cant understand how it would be cause for change a day or days later

none of it makes sense to me , unless one of 2 things arent what they are advertised to be , and that would be the silver or the water

hopefully it wont matter and the c.s. works perfectly for you

peace

lol yea it's weird. I have read that it happens tho. Not sure why. I have a feeling this one may get darker, but it is the cleanest batch in terms of not having big particles. I think that's why sparkles aren't very bright but if you look closely you can see tiny tiny tiny sparkles in the laser beam. It makes sense that smaller particles would be less noticeable and blur together to us when we see them

If that purple kush plant is going to reverse, it should happen soon.

 

[EverythingsHazy]

So the Afghan Kush Ryder than was initially flipped with BioSilver spray looks like all of the flowers are tiny and pollen-less/dying.

But it the purple kush appears to
be flipping. She still has a bunch of pistils, and the brownish purple coloring makes it hard to tell, but the homemade stuff seems to be working.

 

[evol]

The color changing is odd but I'm glad its still working for you. I thought I had a batch get more yellow overnight once but it hasn't happened since so Idk..

 

[EverythingsHazy]

The color changing is odd but I'm glad its still working for you. I thought I had a batch get more yellow overnight once but it hasn't happened since so Idk..

Yea so far nobody online agrees on why it sometimes turns yellow, or even whether yellow is better or worse. Some say it is actually better (more stable I've read). Either way, it appears to be working without burning the plant. Just did another two full sprays back to back with about 15 minutes in between. I think that using 15ppm solution would require more frequent spraying to get the same amount of silver into the plant Also, it doesn't seem to hurt it at all. The plant has almost no growth on any of the side shoots, but I think that is because it is in like a quart pot and hasn't been fed. Going to keep spraying it 3-4 times a day until the flower pods start to hang off of their little stems. (Biosilver never got that far, let's see if this is the cure) Since it looks like the AKR flowers aren't going to make any pollen, this purple kush may be used to pollinate a new baby AKR if it shows good genetics.. Looking for something with very pronounced indica features ideally, but as long as it's healthy it can be used to make some cool offspring.

 

[Epic Genetics]

imho the people who say a slight yellow colour is to be expected or better are not able for whatever reason to make a clear c.s. and that is mho

all the best and most informative articles ive read say clear is better , and many explain why

hospitals that use it use clear , even if only as a cleaning agent , but many use it as a steriliser , water purification , as well as many medical uses

peace

- - - Updated - - -

imho the people who say a slight yellow colour is to be expected or better are not able for whatever reason to make a clear c.s. and that is mho

all the best and most informative articles ive read say clear is better , and many explain why

hospitals that use it use clear , even if only as a cleaning agent , but many use it as a steriliser , water purification , as well as many medical uses

peace

 

[NEimmaculates]

It's gotta be the generator your using.
I ran a batch last night. Started it before I went to bed. It ran about 9 hours. My power runs at 5.5 v and 500 mA. I get super tiny particles an it remains clear. This batch came out to 60 ppm. Here's a pic of my gen and the cs

 

[EverythingsHazy]

imho the people who say a slight yellow colour is to be expected or better are not able for whatever reason to make a clear c.s. and that is mho

all the best and most informative articles ive read say clear is better , and many explain why

hospitals that use it use clear , even if only as a cleaning agent , but many use it as a steriliser , water purification , as well as many medical uses


peace

It's gotta be the generator your using.
I ran a batch last night. Started it before I went to bed. It ran about 9 hours. My power runs at 5.5 v and 500 mA. I get super tiny particles an it remains clear. This batch came out to 60 ppm. Here's a pic of my gen and the cs
View attachment 357367
View attachment 357370

that very well may be the case, but it appears to be working on the plant reversal and also every batch turns the same color which is at least consistent lol and it doesn't damage the plant.

Im in looking into ordering a small air pump and running that to keep the wires clean but I am weary of putting in an airstone and a plastic tube into the water while it's being made. If be more comfortable skipping the stone and using a tube spitter to get a couple bubbling tube ends in there without a rock, but we'll see. Leaving an airstone running in distilled water overnight one day might get out any particles that were in it but I'll have to test it out.

Question, if I pluck off some f the flower buds (pollen sacs) from the purple kush, will they continue to mature and dry out and be usable or are they still too small?