Mephisto Genetics Walter White & Skywalker

[Need4Weed]

Update day 38
I received the 3x MarsHydro TS-1000 this past weekend and now each plant has a decent light. Walter White is enjoying the California Lightworks Solar Extreme. I recently topped her and I gave her a good hair cut also. She's finally starting to take off I think. Here's a pic!

The Skywalker is well into pre-flower, but her leaves look on the funky side. Here's a pic and thanks for stopping by!

 

[DuKeX]

Bro whats the distance of your lamps ? that curly leafs are also cause of too much heat from the light, try to put your lamps bit higher. Have fun with your grow

 

[Need4Weed]

Bro whats the distance of your lamps ? that curly leafs are also cause of too much heat from the light, try to put your lamps bit higher. Have fun with your grow

Thanks for the input and you know I thought the same thing and moved her light from 18 to 24 inches. I also added a 4 hour dark period over the last few days. Hopefully, it will be to her liking!

 

[DuKeX]

24/0 plan in my personal opinion its not worthy, autoflowers need a bit of dark in their lifetime . You can have great yields by 20/4 or 18/6.

 

[Need4Weed]

24/0 plan in my personal opinion its not worthy, autoflowers need a bit of dark in their lifetime . You can have great yields by 20/4 or 18/6.

24 hours works for me when it gets real cold as I usually don't have to add heat, (which lowers the humidity). Btw, humidity has been on the low side since I started this grow, (between 45 & 50%). It's been running between 35 and 40 percent the past week, (Since I've added the 3x Mars TS-1000). Which could be why the Skywalker is unhappy? I usually notice a more inward curl of the leave (cupping), when humidity has been a problem in the past.

 

[Duckster]

So what kind of temps are you running with all the new lights?

 

[Need4Weed]

So what kind of temps are you running with all the new lights?

A tad too high for my liking, but a lot of that is due to outside temps being in the low to mid 80s F - (around 29 Celsius), which is 25+ degrees above normal. As it gets colder, I would expect those temps to come down. Actually, temps were close to 90 F, (32 - 33 Celsius), a couple times, but that was due to having the extraction fan on low right after I added the new lights. I have the extraction fan, (6 in 480 cfm), running on a 6 setting now and that brought temps down to current levels.

 

[Duckster]

A tad too high for my liking, but a lot of that is due to outside temps being in the low to mid 80s F - (around 29 Celsius), which is 25+ degrees above normal. As it gets colder, I would expect those temps to come down. Actually, temps were close to 90 F, (32 - 33 Celsius), a couple times, but that was due to having the extraction fan on low right after I added the new lights. I have the extraction fan, (6 in 480 cfm), running on a 6 setting now and that brought temps down to current levels.

I know what you mean. I'm down on the gulf coast where it is hot and humid most of the time. I can usually keep the humidity down around 50% but the heat is always my problem. If i run both of my lights with COBs in the summer tent temps will hit 95F. It will hit 88-90 in the winter.

 

[Need4Weed]

I know what you mean. I'm down on the gulf coast where it is hot and humid most of the time. I can usually keep the humidity down around 50% but the heat is always my problem. If i run both of my lights with COBs in the summer tent temps will hit 95F. It will hit 88-90 in the winter.

I know you've told me you lived on the Gulf Coast in the past, but I guess I forgot. I hope you made it through hurricane season without disruption. I noticed humidity is up in the grow room, (around 50%), as it's suppose to start raining tomorrow. I also turned the fan controller on 9 and I left the grow room door cracked a bit and now temps are around 80. It's been around 12 hours, but no change in the Skywalker's leaves yet. i guess it could be a phenotype specific thing.

 

[Need4Weed]

Update day 50

Environment has been more to the plants liking since the last update, although humidity is still on the low side. It seems like the leaves on the Skywalker are a little more relaxed then in previous updates. She's also budding up nicely, with that great gassy fuel smell that we all know and love. Here's a couple pics.

Walter White is going to be a chunky little bush. Her structure reminds me a lot of a SODK that yielded 9 1/2 zips. This is my first time growing her and I'm glad she's finally starting to pre-flower. Here's a couple pics and thanks for stopping by!