Indoor The Elvis Builds a Lamp!!

[HLG1]

Plants looking great.
Just added you on IG.

 

[The Elvis]

Plants looking great.
Just added you on IG.

Thank you very much!!

 

[KonopCh]

@The Elvis which reflectors do you use with Vero's? Need also holder, right?

 

[The Elvis]

@The Elvis which reflectors do you use with Vero's? Need also holder, right?

Yes you need the holders..

 

[iampepe]

What voltage v29's are you using? Party on

Sent from a galaxy far away...

 

[The Elvis]

What voltage v29's are you using? Party on

Sent from a galaxy far away...

50FV 110max im running at 70% power .

1) 4 pcs SST X for Vero 29
2) 4 pcs Vero 29 3000K 80 CRI B type so 50V
3) 4x Reflector adapters and 4xReflectors LEDIL painted chrome..
2) 100k ohm potentiometer and 5.6K ohm resistor..... i didn't use it because i dont do to 1005 or lower then 50%
5) Plastic Junction box
2) 2 HLG-240H-C2100 B mean well drivers

 

[The Elvis]

Hang on Im using type C Im 100% sure You have to to have type C ..

I guess im using a B

http://www.bridgelux.com/products/vero-series#specifications

 

[The Elvis]

1. Nominal CCT as defined by ANSI C78.377-2011. Products with a CCT of 5000K-6500K are hot targeted to T
c
= 85°C.
2.
CRI values are typical for Decor Series Class A products. CRI values are minimums for all other products. Minimum R9 value for 80 CRI products is 0, the
minimum R9 values for 90 CRI products is 50.
3.
Drive current is referred to as nominal drive current.
4. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.
5.
Typical performance is estimated based on operation under DC (direct current) with LED array mounted onto a heat sink with thermal interface
material and the case temperature maintained at 85°C. Based on Bridgelux test setup, values may vary depending on the thermal design of the
luminaire and/or the exposed environment to which the product is subjected.
6. Minimum flux values at elevated temperatures are provided for reference only and are not guaranteed by 100% production testing. Based on Bridgelux
test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected.
7.
Nominal CCT is defined by the Lighting Research Center’s Class A definition. The center of the Class A color bin is on the corresponding isothermal line.
8. GAI value is 80. To help ensure optimal fixture level performance, GAI is measured at the fixture level, on axis, at a case temperature of 70°C. GAI may
vary depending on fixture design and performance.
Part Number
Nominal CCT

BXRC-30E10K0-B-7X
1) 3000
2) 80
3) 1800
4) 13063
5) 11757
6) 50.7
7) 91.2
8) 143

 

[The Elvis]

So lets so an update!!! I'm so happy with the VR29s. passes to @briman Look what those PC chips did to my plants!!

I call a Smoke out!!! these DIY lamps are very fun!!! @passes to @pop22 @iampepe dont skip @BigSm0 and @budelee @arty zan you get your own J

with them sitting the the grow room im getting good measurements on how wide they are!!! The other thing is pure light penetration... im personally blown away!!!

Look how green those lower leaves are!!! that tells me the COBS are hitting then bottom 3 watt LED diodes can not achieve this!! just cant!! lets look at how tall!!


I'm growing two Dinafem fruits both very stable! they are very tall and very wide still cant believe SMD light chips did this!!

plant one.

You can see where the cob burned my leaves..




we are now making THC so its party time!!!

 

[BigSm0]

Looking great brother. You have run a lot of leds before right? It's no contest