The Definitive Colloidal Silver Tutorial

[cres]

Thanks again Bob. I will be following instructions to the letter.

It's a learning curve, but following bobs steps will give you the best chance...

 

[yodabuds]

Don't give up brother! Just had to pipe in with reading this thread and following bobs and cres's advice every reversal I do now is a success!
Sending a good luck she-male karma cloud your way!
:group:

 

[KsjAuto]

Just read the hole thread
Amazing stuff, Im a little wiser now and also a little cunfused, but hey it takes time to proces all that info, so back to the couch and let it all settle in
Thanx for the great info ya'll
Peace

 

[nben]

One question I do have that I have not been able to find the answer to~~
The wires are just electric-taped onto the silver correct? It wasn't clear how they were attached but I am assuming that the original end of the "wall wart" was clipped off, wires separated and stripped exposing the copper wire inside, and then taped with the silver...? Thanks guys!

 

[Epic Genetics]

One question I do have that I have not been able to find the answer to~~
The wires are just electric-taped onto the silver correct? It wasn't clear how they were attached but I am assuming that the original end of the "wall wart" was clipped off, wires separated and stripped exposing the copper wire inside, and then taped with the silver...? Thanks guys!

yes , i just bared/stripped the ends of the wires , wrapped them around the end of the silver and taped em

peace Cool:

 

[nben]

Perfect! Thanks again Bob. Exactly the answer I was hoping for

 

[arboles]

I ran a pint size batch for over 4 hours yesterday evening, it was clear and I had a reading of 5 ppm. It also had a bitter taste, I wanna get the most out of my CS, so I thought about using it as a health aid. Anyone try this? I hear you can brush your teeth, adding CS to the paste will kill all plaque and keep cavities away. I will update this evening when the ppm goes up. At 15 it is really 30 ppm, correct? Am I looking for 30 or 40 ppm?

 

[Epic Genetics]

I ran a pint size batch for over 4 hours yesterday evening, it was clear and I had a reading of 5 ppm. It also had a bitter taste, I wanna get the most out of my CS, so I thought about using it as a health aid. Anyone try this? I hear you can brush your teeth, adding CS to the paste will kill all plaque and keep cavities away. I will update this evening when the ppm goes up. At 15 it is really 30 ppm, correct? Am I looking for 30 or 40 ppm?

im not so sure about that reading being more ,,,,

id like to see proof of that , ppm is parts not salts

anyway , yes i use it for health , and brush my teeth with it , you can make your own paste with baking soda and cs water , tastes like crap , but boy oh boy does it whiten your teeth nice

by the way , store bought tooth paste is poison , it claims safe levels of nasty crap , but if you stop to think about it the makers are useing a loop hole , the safe levels are a one time thing , not a daily exposure

what power source are you useing ? and are you bubbling it ?

run it 8 hrs , possibly 12 , you should not need to go more then 12 , take a lazer pointer and shine it through the jar while in a dark room , if you see a solid line of sparkle in the beam you are good to go , if you use it for reversing plants great , if you drink it then dilute it 50/50

peace Cool:

 

[arboles]

im not so sure about that reading being more ,,,,

id like to see proof of that , ppm is parts not salts

anyway , yes i use it for health , and brush my teeth with it , you can make your own paste with baking soda and cs water , tastes like crap , but boy oh boy does it whiten your teeth nice

by the way , store bought tooth paste is poison , it claims safe levels of nasty crap , but if you stop to think about it the makers are useing a loop hole , the safe levels are a one time thing , not a daily exposure

what power source are you useing ? and are you bubbling it ?

run it 8 hrs , possibly 12 , you should not need to go more then 12 , take a lazer pointer and shine it through the jar while in a dark room , if you see a solid line of sparkle in the beam you are good to go , if you use it for reversing plants great , if you drink it then dilute it 50/50

peace Cool:

I'm using a power supply, it's producing 6.18V and 500 ma. My solution is at 12 now and it's still clear, but I'm seeing a few flakes flying around in the bubbles. I read somewhere in this tutorial that the ppm's are actually double what the meter reads.

Exactly what is the correct ppm reading I'm looking for to do a full reversal? 30-40? Do I need to increase the voltage to 9, or is 6 good?

 

[Epic Genetics]

I'm using a power supply, it's producing 6.18V and 500 ma. My solution is at 12 now and it's still clear, but I'm seeing a few flakes flying around in the bubbles. I read somewhere in this tutorial that the ppm's are actually double what the meter reads.

Exactly what is the correct ppm reading I'm looking for to do a full reversal? 30-40? Do I need to increase the voltage to 9, or is 6 good?

what you read is what someone else claims , ive seen no professional proof of that

i like 30-40 but have seen many claims of 20 working just fine

like ive told you elsewhere , if you see a solid or near solid beam of sparkles when shooting a lazer pointer through it your good to go

your power supply is pretty much identical to mine , if you are bubbling it then 12 hours is a safe number , i useually start it during the day then go to bed that night , clean the wires before bed , by morning it should be good , if not , clean the wires again and let it go until the wires would need another cleaning , the closer you get to done the faster the wires need cleaning , once your at the point you need to clean them every 2 hours your done and would only be making larger colloids/particles at that point if you let it keep going

peace Cool:

EDIT : maybe my power is different , cant remember if im 6 or 9 , had posted it here before , ill go check again

yup 6 , same as yours 500 mA