Extraction Rosin Gummies

[McDee]

It's best if you leave it sit out to bloom, you can put in fridge if going to be over night. The vg and rosin mix needs to be stirred well it will separate if you let it. Experiment with it, I took a couple recipes and put them together. 30 molds or peices sound like a lot for only 1 box so you may need to eat more. I normally get around 36-37 but I used little more water and got 40. Test it out, ya decarbed rosin has a different taste kinda burns a little to me. Just keep slowing mixing rosin/vg it should blend in. Coconut oil will incorporate much easier if that's an issue for some people. You can put 1g of rosin in 1/4cup of coconut oil, put on some heat and will just melt and mix very easy with the coconut oil. Be patient with it I think I will try 5 next time and see how that goes. Remember to let them dehydrate.

 

[McDee]

I put a link to the molds I got in the list of things needed. 8 per mold, 2 mold for $9.95 U.S.

 

[slowandeasy]

It's best if you leave it sit out to bloom, you can put in fridge if going to be over night. The vg and rosin mix needs to be stirred well it will separate if you let it. Experiment with it, I took a couple recipes and put them together. 30 molds or peices sound like a lot for only 1 box so you may need to eat more. I normally get around 36-37 but I used little more water and got 40. Test it out, ya decarbed rosin has a different taste kinda burns a little to me. Just keep slowing mixing rosin/vg it should blend in. Coconut oil will incorporate much easier if that's an issue for some people. You can put 1g of rosin in 1/4cup of coconut oil, put on some heat and will just melt and mix very easy with the coconut oil. Be patient with it I think I will try 5 next time and see how that goes. Remember to let them dehydrate.

Remember I used 1.5x the Rosin. My molds are smaller, so I have more to fill. I am going to start with 3 today and see what happens. You used 2x the Jello, I would have 60 gummies at this size if I used 2 packs.

 

[slowandeasy]

I knew by your recipe that I only had enough molds for 1/2 the amount of Jello. I just didn't know exactly how many it would fill, since I have never made this. Now that I know that 1 package of Jello will do 30 Gummies, I will dose them as follows.

.6g of Rosin for Normal Strength
1.2g of Rosin for Extra Strength.

So in theory if I dose them perfectly at .6g per pack of Jello I will have approx 20mg per Gummy.

If we double the amount of Rosin then we will get approx 40mg per Gummy. Because molds are different sizes, I prefer to dose per mg used And divide equally.

 

[McDee]

I knew by your recipe that I only had enough molds for 1/2 the amount of Jello. I just didn't know exactly how many it would fill, since I have never made this. Now that I know that 1 package of Jello will do 30 Gummies, I will dose them as follows.

.6g of Rosin for Normal Strength
1.2g of Rosin for Extra Strength.

So in theory if I dose them perfectly at .6g per pack of Jello I will have approx 20mg per Gummy.

If we double the amount of Rosin then we will get approx 40mg per Gummy. Because molds are different sizes, I prefer to dose per mg used And divide equally.

I know they are smaller, that's what I mean. Dont go by my amount cause of size. That's why I weigh them. I know full pieces are 8g, so 64g is good dose. Not all gummies get filled the same lol, I try but not always sometimes they are full then they cool and are sunken in. So try weighing when you dose, it is a more accurate way than counting gummies. I would like to get a Tcheck so I can actually test them but money will dictate that. Let me know how 3 does bud.

 

[slowandeasy]

I know they are smaller, that's what I mean. Dont go by my amount cause of size. That's why I weigh them. I know full pieces are 8g, so 64g is good dose. Not all gummies get filled the same lol, I try but not always sometimes they are full then they cool and are sunken in. So try weighing when you dose, it is a more accurate way than counting gummies. I would like to get a Tcheck so I can actually test them but money will dictate that. Let me know how 3 does bud.

My method would guarantee the same amount per Gummy. Putting "X" amount of Warm Decarbed Rosin in each individual mold of half filled Gummies. Mix and add more gummy mix to top them off. Decarbing Rosin with VG, then mixing, heating, and pouring you will have inconsistency. I can decarb my Rosin and add equal drops to each gummy. No need to weigh anything after. That just makes more sense to me and I will waste less for sure. I am using more Rosin per Gummy than you, so they can be smaller. I am guessing 5 will be ok for me, but starting with 3 to see the effects. Thanks again!

 

[McDee]

My method would guarantee the same amount per Gummy. Putting "X" amount of Warm Decarbed Rosin in each individual mold of half filled Gummies. Mix and add more gummy mix to top them off. Decarbing Rosin with VG, then mixing, heating, and pouring you will have inconsistency. I can decarb my Rosin and add equal drops to each gummy. No need to weigh anything after. That just makes more sense to me and I will waste less for sure. I am using more Rosin per Gummy than you, so they can be smaller. I am guessing 5 will be ok for me, but starting with 3 to see the effects. Thanks again!

What ever works for you bud, more than 1 way to skin a cat lol. I dont have much waste tho, just the little I cant get out of the pan. That's why I love the silicone measuring cup, it just peels off and put into a ball. I have not found any inconsistencies in batches, like 8 from 1 batch is the same as others. That's part at the end when you let it marinate keep stirring slowly and it blends together. Once, you have made them a few times you get better with mixing. I was worried that it would be stronger in spots than others, but not an issue. That's why I add lecithin as well, you body will absorb it better if used.

 

[slowandeasy]

What ever works for you bud, more than 1 way to skin a cat lol. I dont have much waste tho, just the little I cant get out of the pan. That's why I love the silicone measuring cup, it just peels off and put into a ball. I have not found any inconsistencies in batches, like 8 from 1 batch is the same as others. That's part at the end when you let it marinate keep stirring slowly and it blends together. Once, you have made them a few times you get better with mixing. I was worried that it would be stronger in spots than others, but not an issue. That's why I add lecithin as well, you body will absorb it better if used.

That's cool. I am sure you are right, the more you do it the easier it becomes. For me I have to get a new pan for sure. Maybe after getting a new pan and doing it a few times I will be more confident in the consistency. But I had stuck on goodness on the pan and a little on the measuring cup. I will eat it all, but a nice new pan might minimize any sticking.

 

[McDee]

That's cool. I am sure you are right, the more you do it the easier it becomes. For me I have to get a new pan for sure. Maybe after getting a new pan and doing it a few times I will be more confident in the consistency. But I had stuck on goodness on the pan and a little on the measuring cup. I will eat it all, but a nice new pan might minimize any sticking.

Ya, new is usually better. Remember you are using half the VG and more rosin so you're going to have more stick to sides. I put my VG in a shot glass on a candle warmer or in my lift.

When it gets warm stir as hard as you can with out spilling. Do it a few times, when ready to add stir good then pour in. I take a silicone spatula long skinny 1, and scrape around the side. Gets 99.9% rosin on it then I stir with it. So not much wasted, I hate to waste. I would use more VG, even if you mix half with rosin put in, then put other half of VG in to suck up leftover rosin. Try different ways see what works for you. The easiest is with coconut oil, it mixes right in adds a little to flavor tho.

 

[slowandeasy]

Ya, new is usually better. Remember you are using half the VG and more rosin so you're going to have more stick to sides. I put my VG in a shot glass on a candle warmer or in my lift.

View attachment 994609


When it gets warm stir as hard as you can with out spilling. Do it a few times, when ready to add stir good then pour in. I take a silicone spatula long skinny 1, and scrape around the side. Gets 99.9% rosin on it then I stir with it. So not much wasted, I hate to waste. I would use more VG, even if you mix half with rosin put in, then put other half of VG in to suck up leftover rosin. Try different ways see what works for you. The easiest is with coconut oil, it mixes right in adds a little to flavor tho.

Yeah, I'm not sure why you suggest 1/4 cup per gram of Rosin of Coconut oil? That's a lot. You could do the same amount as the VG and it will mix better and not add a flavor as much as a 1/4 cup would. I decarb my extract in small amounts of Coconut oil often and it mixed well.