Extraction Rosin Gummies

[lunarman]

I had stuff from before that was all indica dominant stuff that did. I dabbed 3oz of CBD Crack through it and wasnt ask knock out. More harsh would recommend making edibles with it instead. I would take some normal rosin put on silicone container leave open for a while in light. I think that's where the thc converts to cbn or whatever happens from the light, but there're a lot a thoughts on that from what I've read. I would try it compared the 2 see if 1 works better or neither at all. Let's us know...

I will do that for sure. Going to take a while though. I like the idea of making edibles with the reclaim.

 

[McDee]

I will do that for sure. Going to take a while though. I like the idea of making edibles with the

Havent done that yet, yep it takes a while for sure but just keep dabbing you'll get there lol.

 

[BCBudlady]

Not sure butter or ghee would work, just never seen it done or tried myself. Give it a shot let us know of it works. I do the VG because I dont want all the saturated fat with the coconut oil. With decarbed rosin you dont need fat for the goodness to stick. I think taste is a little bit more "true" with the VG, but just my opinion.

Yes, by budder, in mean coconut oil. Will try it and let you know !

 

[McDee]

Yes, by budder, in mean coconut oil. Will try it and let you know !

Oh, ok I thought you meant actual butter lol. For sure you can get creative. I have used energy drinks instead of juice with Durban Poison for when I went to the amusement park here. Got a new idea for an edible gotta get in the lab and test it out 1st. If it works out will post it as well. I love to try new stuff when I can.

 

[McDee]

Here is some of the King Kush pressed at 210°f for 4 mins and little more timer didnt start right away lol. So funky like butter that's sits out at room temperature. Top shelf for rosin excellent stuff, strong as shit too.

Got a butter smell like from the movies on you popped corn. No hiding this stuff smell from a mile away.

 

[Rwg111]

Hey AFN, hope your all lifted nicely for this ride! If not take a sec, go do what it is you do because I took 8 of these at 7:15 and it now 8:32 and they are kickin' in lol. This is easy no worries. Here is what you need.

6oz jello I used cherry
1oz unflavored gelatin I use a 250 bloom from Amazon you can get Rhodes in the store normally
1g rosin or 1/4 cup canna infused coconut oil both decarbed
1/2 - 2/3 cold water/juice I used cherry koolaid
1-3 tbsp vegetable glycerin if using rosin
1/2 tsp citric acid
1/2 tsp lecithin (optional)
1/4 cup corn syrup I use light
Molds

View attachment 992156

Ok I used 1g of rosin I press from my harvest 2 weeks ago Kings Kush auto from Greenhouse Seed Company. Identical to Ripley's OG. You can use coconut oil that's infused from flower, if so used 1/4 cup oil 1/2 cup water/juice. If rosin use 1-3 tbsp VG and up to 2/3 cup water/juice. I put mine in the VG in my lift for 30 mins. If you use juice or flavored beverage you get better flavor.

1. Put all you dry ingredients in a saucepan.
2. Stir in gently you liquid and corn syrup until combined as best as you can. Do not make bubbles! Gently.
3. Let sit for at least 15 mins but however long you want in frig mine sat for 1hr out.

View attachment 992160

Now at this point I get my molds ready silicone off Ebay spray them and they come out good. They wont stick to each other when they come out. Put them on cookie sheets cause molds are hard as shit to pick up full. Do it 1st trust me. So here is 1 of my secret weapons, a silicone measuring cup.
View attachment 992161
A lot of people use eye droppers and that's cool, they work. But if you use a silicone measuring cup you dont lose any gummy mix. When it is magical I dont like to waste. The leftover residue easily peels up and can be eat too. You dont lose any in the eyedropper so bonus!

Ok, so now what we have done is called blooming the gelatin. At this point we want to put on low heat. Stir in your oil or VG/rosin gently. Keep it moving slowly until it combines and starts to clear up. I couldn't take pics at this point cause no one to take while I was stirring lol. Do not let it boil. If you go to fast you will make air bubbles and wont look as nice as a finished product. Once combined continue to stir for few mins 5 or so letting it brew together. When ready I pour from pan into silicone measuring cup. Take your time pour carefully, you want equal gummies. I would not use gummy bears unless they're bigger 1s. The smaller your mold the harder it will to be neat, and you don't want to have to eat 30 of them lol. Save gummy bears for non magical 1s. I weigh mine out so I know no matter what shape if bits and pieces how much to eat. When dried out they weigh 8g each so about 64g is a good dose for me. This way if some are under filled or over filled you can get the correct amount.

View attachment 992163

Let them sit and cool. The better the unflavored gelatin the faster they will set. Once solid put in freezer for 15 mins or like 1hr in frig. Then you can pop them out. Some put corn starch on backs I put little Pam.

Yield: 42 - 10g gummies
View attachment 992170
There ya go, now they need to dehydrate so leave them in a container no lid in fridge for a few days. Check them when they are to the gumminess you like put them in bag or container sealed. I have left open in fridge for 6 months and still good suck in them and they com back. They're stable wont fall apart, but let them dehydrate 1st. You can put a sugar/citric acid to make sour gummies but not before the dry out. You can eat right away but if you want "store like gummies" got to age a little. I used cherry koolaid to help the cherry jello and gummies are good. The more silicone things you use the less you lose. You can add flavoring or flavors if you like. Enjoy, go slow if you dont know your tolerance I take 8 but 5-6 would be enough for most that dont take edibles daily.

Thank you for sharing very good presentation easy to follow.

 

[McDee]

Here is some of the King Kush pressed at 210°f for 4 mins and little more timer didnt start right away lol. So funky like butter that's sits out at room temperature. Top shelf for rosin excellent stuff,

Thank you for sharing very good presentation easy to follow.

Thanks, I hope so was flying high when did it. Gotta go back and look for typos and autocorrects lol

 

[BCBudlady]

Oh, ok I thought you meant actual butter lol. For sure you can get creative. I have used energy drinks instead of juice with Durban Poison for when I went to the amusement park here. Got a new idea for an edible gotta get in the lab and test it out 1st. If it works out will post it as well. I love to try new stuff when I can.

Again, thank you for the gummy recipe. I mostly extract into coconut oil and everclear. Always looking for great ways to utilize my material.

 

[Rwg111]

I have always done my edibles by making butter,tinctures, oils from flower. I am really looking forward to making some with rosin. At 180 I am getting a crumble like rosin and the terp profile is amazing. I get a great product at 8 ton if I take it to 10 ton the rosin gets a little green but remains somewhat crumbly not quite a caramel texture. I will post some pics of the rosin this weekend as I am planning on making hard candies or lollies. Maybe some gummies 2 thanks: @Mcdee )I've all kinds of rosin at the moment may as well spend some time in the kitchen. The little ones always like to see me making goodies there is always some non med goodies for them as well. My 12 year old sons have asked for some star wars or fortnite molds

 

[McDee]

Again, thank you for the gummy recipe. I mostly extract into coconut oil and everclear. Always looking for great ways to utilize my material.

Anytime.