MarsHydro Light Shows 2023 NORBY grows Sawney beans - FORUM STOMPER-DOUBLE GRAPE+PLANET OF THE GRAPES & EL JEFE "THE BOSS" & Dutch Passions SFV OG (Mars Hydro TSW 2000)

MarsHydro Light Shows 2023
Day 16 in The Den {Sawney bean strains & Dutch Passions SFV Og}
  • DAY 16

    IN THE

    DEN OF DANKQUILITY
    IMG_20230716_121605.jpg
    IMG_20230716_121650.jpg
    IMG_20230716_121705.jpg
    IMG_20230716_121738.jpg
    IMG_20230716_121746.jpg
    IMG_20230716_121826.jpg
    IMG_20230716_121903.jpg
    IMG_20230716_121908.jpg
    IMG_20230716_121915.jpg
    IMG_20230716_121930.jpg
    IMG_20230716_121950.jpg
    IMG_20230716_121843.jpg
    IMG_20230716_121849.jpg


    Ggh

     

    Attachments

    • IMG_20230716_121650.jpg
      IMG_20230716_121650.jpg
      1.7 MB · Views: 6
    Last edited:
    Grow Den building {prep stages}
  • I'm gona be copying my previous den design as its a perfect template for this new one I'm building. But slightly bigger.
    This is just the starting stage of putting things together and may take a while. But it will be done lol
    The frame is 120 x 100 cm x 145 cm tall.
    And is crudely made Out of pallets cut to size.
    It looks rough but each side will be covered in damp course plastic to make 4 panels that gets screwed together with corner brackets after it's placed in the hole.

    After the hole is dug I dig a French drain in the centre of the hole floor.
    Set a few blocks down.
    The I cover the hole in plastic and set in the base pallet and set the frame ontop of that and screw it all together.
    Drop more plastic into the inside of the box.
    Put the roof panel on and wrap it all up nice and tidy inside with plastic using a stapler.
    Then the outside of the box will get wrapped in the first piece of plastic that was put in the hole around the outside.
    I will explain on how I make and add on the hallway and entrance a different day as well as how the exhaust and inline fan and power cable gets added too. Lol
    And then the covering up when completed. Lol

    But I hope up get an idea on how it's done.
    IMG_20230716_184017.jpg
    IMG_20230716_184444.jpg
    IMG_20230716_184500.jpg
    this is the possible location for the build.
    IMG_20230716_185109.jpg
    IMG_20230716_185121.jpg
    IMG_20230716_185137.jpg
     
    Last edited:
    Evicted
  • When I went down for a look last night I noticed that the right Wellington boot had powder mildew & holes everywhere on the bottom leave and upon inspection I noticed 3 tiny green bugs on the leaves and a few tiny moving specs which I can only assume is mites.
    So the Boot got the boot and now is sitting outside. Gona spray with bug spray and let it sit outside.

    I think the mildew happened when the fan got knocked off by mistake for like 8 hours
    Got more space now.
    IMG_20230717_113643.jpg
    IMG_20230717_113649.jpg
    IMG_20230717_114453.jpg
     
    Last edited:
    Day 19 in The Den {Sawney bean strains & Dutch Passions SFV Og}
  • DAY 19

    Growing great

    Nearly time to pluck some fan leafs.

    But not quite yet


    IMG_20230720_032426.jpg
    IMG_20230720_032411.jpg
    IMG_20230720_032154.jpg
    IMG_20230720_040007.jpg
    IMG_20230720_040324.jpg
    IMG_20230720_040244.jpg
    IMG_20230720_035709.jpg
    IMG_20230720_035803.jpg
    IMG_20230720_032114.jpg

    IMG_20230720_040050.jpg
    IMG_20230720_032403.jpg
    IMG_20230720_032136.jpg
     
    Back
    Top