Does anyone run DWC with megacrop? Please help if so. Just made my first DWC bucket and have a seed germinating. Unsure where to start feeding wise... have a PPM meter coming in the mail. Thanks.
I ask that and @HemiSync above is running 5 gallon DWC lol.
Can you please help me man. Here’s what I have. Bought a shitty pump and someone told me to take it back and get a better one so I did. This one makes the water appear to be almost rolling boiling.
View attachment 1025080
Never ran hydro ever. Good soil grower, excited to try hydro. HOPING I can get by on just megacrop as I hear hydro is abit finicky....
Here is my cheat sheet for a 20 gal reservoir. I started mine off between 30-40% strength. So for 5 gal. I would start off about 10 grams of MC.
20 Gal tank
6grams / gal = full strength
5grams = 1 teaspoon
20% 24g
30% 36g
40% 48g
50% 60g
60% 72g
70% 84g
80% 96g
90% 108g
100% 120g
so for a true 5 gal it would be:
20% 6g
30% 9g
40% 12g
50% 15g
60% 18g
70% 21g
80% 24g
90% 27g
100% 30g
I have run DWC in the past but this is my first time with MC. I don’t measure it out, I adjust my EC or PPM. I use 200ppm for seedlings and bump up from there as they show a need. That one in the picture was just bumped up to 400ppm of MC 1.0. Side note: my tap water has plenty of cal/mag, I add 400ppm of MC on top of what my water has in it.I ask that and @HemiSync above is running 5 gallon DWC lol.
Can you please help me man. Here’s what I have. Bought a shitty pump and someone told me to take it back and get a better one so I did. This one makes the water appear to be almost rolling boiling.
View attachment 1025080
Never ran hydro ever. Good soil grower, excited to try hydro. HOPING I can get by on just megacrop as I hear hydro is abit finicky....
I have run DWC in the past but this is my first time with MC. I don’t measure it out, I adjust my EC or PPM. I use 200ppm for seedlings and bump up from there as they show a need. That one in the picture was just bumped up to 400ppm of MC 1.0. Side note: my tap water has plenty of cal/mag, I add 400ppm of MC on top of what my water has in it.
My real concern is for your setup. What kind of lights are you using? And if you shine one on the outside of that white bucket can you see it inside the bucket? If so, you are eventually going to have a big problem with stuff growing inside your bucket that won’t be friendly to your roots. There has to be as little light pollution going inside your DWC as possible. I use black, opaque buckets because of that. If you can see the light thru you need to find a way to block it. https://www.growweedeasy.com/dwc-stop-light-leaks-in-reservoir Those pictures tell the whole story.
Water temperature should be monitored and kept around 68°F as cool water can hold more dissolved oxygen in the 60-70°F range. Although you can go higher if using a beneficial against root rot. Also, if you don’t have one, a pH meter is necessary when running DWC.
I love the DIY spirit, but what is that you are using as a netpot? I hope it’s strong enough to hold the rootball of a fully grown plant. You will be amazed at how big they can get. I’ve seen them rip right thru a five inch netpot. Plus that white lid has the same issue with light as the bucket. Not meaning to bash you, but don’t want to see you get 1/4 of the way thru only to be battling root rot. Good luck, start a journal and I’m sure there will be at least a couple growers willing to tag along and offer advice.
Here is where I started reading a few years back when I was first interested in DWC.
https://www.growweedeasy.com/deep-water-culture-faqs
There is a free sample available, but only 300gIs the free sample still available?
I would like to give it a try.
Thanks.