Looking good friend! I have some wierd growth on one of my Dr Feel Good also. Must be the moon or something
Indoor McB's Flash Seeds Grow: Chaze + Santa
- Thread starter MrMcbud
- Start date
Seem to be outgrowing the odd growth around week three.
As usual have made a few changes.all chaze repotted to final containers and had a 6.0 PH feed of seagro and epsom(1/4 strength)
Added some 45w cfls,and Two mystery seedlings popped up in my santa pot.
Accidentally spilled about 20 of my own og kush X bubba 76 F1's seeds while drying,maybe 2 landed in a pot? or was it the pure X bubba hybrid?
As usual have made a few changes.all chaze repotted to final containers and had a 6.0 PH feed of seagro and epsom(1/4 strength)
Added some 45w cfls,and Two mystery seedlings popped up in my santa pot.
Accidentally spilled about 20 of my own og kush X bubba 76 F1's seeds while drying,maybe 2 landed in a pot? or was it the pure X bubba hybrid?
Attachments
Last edited:
Looking good friend! I have some wierd growth on one of my Dr Feel Good also. Must be the moon or something
All of my seeds were squashed to some extent on arrival.the santa moreso than the chaze,but all had a rough trip.
only 3 visibly cracked,so i planted the best and left the questionables for the second wave.
All of the santa's so far have needed help out of the seed shell above ground,so im blaming a light postal squishing and expecting slightly more nutrients out of my starter soil.
I have compensated with feedings of high N and have added medium/slow release(30 day) flower ferts into the outer pots,this should buffer them lightly through flower once the roots reach the outer soil.
as always i have used 1/4 recommended strength opposed to my 1/2 strength for photo's
Have decided to do an indoor coco grow with ghe nutes next round.
had a fungus gnat scare after receiving a male from another grower and almost chucked 160l of prepared soil...thank you Pyrol.
as u can see by my pics the cab is contantly changing and adapting to my needs,have ordered some light hangers to tidy things up a bit.
If the sun plays along i will empty the cab today and strip the mess of wiring that is above the lightshield.
Have been meaning to power my fans off a pc power supply for a while now,12v adapters are everywhere!
Will give sheet metal work another go soon and build a shield for the 45w's,losing a lot of lumens on the 30l side,lights arent close enough
had a fungus gnat scare after receiving a male from another grower and almost chucked 160l of prepared soil...thank you Pyrol.
as u can see by my pics the cab is contantly changing and adapting to my needs,have ordered some light hangers to tidy things up a bit.
If the sun plays along i will empty the cab today and strip the mess of wiring that is above the lightshield.
Have been meaning to power my fans off a pc power supply for a while now,12v adapters are everywhere!
Will give sheet metal work another go soon and build a shield for the 45w's,losing a lot of lumens on the 30l side,lights arent close enough
Good luck on all the work ahead and a big :thumbs: for the DIY. i love that stuff. for me its anyway to save a buck and i'm very happy
GoAuto6
Galactic Travler
nice cab.. nice and full..:smokebuds:dont mind if i sub up....
Thanks Guys,bit of a mess wiring wise,but the weather has turned on me again,wind is blowing a gale.
The cab is a tad full with 15 plants,but 6 of them are destined to be straight outdoor cold/wind and bug resistance testers on my autoXreg f1's.
basically going from pot to ground as soon as they are big enough.
In the cab currently is
Photo:
1)The Pure,thinks its an auto,still flowering under 20/4
2)White Rhino,sexed outdoors,brought in to reveg as a mother
3)two mystery seedlings,i suspect they are either santa late bloomers or 2 of my spilled beans(lol)
Auto:
As it stands i have 3 chaze and 3 Santa going,with another 2 of each in germination(but not looking promising,4days+ and nada)
They have been moved to their final pots and nuted appropriately(as mentioned earlier)
Have actually just given the Santa's a 6.0 ph watering in the efforts to drop soil ph closer to 6.5 from 6.8
Random question,anybody used GHE nutes,order is completed and waiting to be emailed.
Anybody used diamond nectar?
Still deciding between coco and dwc?
I have all the makings for both available...will do some more reading
The cab is a tad full with 15 plants,but 6 of them are destined to be straight outdoor cold/wind and bug resistance testers on my autoXreg f1's.
basically going from pot to ground as soon as they are big enough.
In the cab currently is
Photo:
1)The Pure,thinks its an auto,still flowering under 20/4
2)White Rhino,sexed outdoors,brought in to reveg as a mother
3)two mystery seedlings,i suspect they are either santa late bloomers or 2 of my spilled beans(lol)
Auto:
As it stands i have 3 chaze and 3 Santa going,with another 2 of each in germination(but not looking promising,4days+ and nada)
They have been moved to their final pots and nuted appropriately(as mentioned earlier)
Have actually just given the Santa's a 6.0 ph watering in the efforts to drop soil ph closer to 6.5 from 6.8
Random question,anybody used GHE nutes,order is completed and waiting to be emailed.
Anybody used diamond nectar?
Still deciding between coco and dwc?
I have all the makings for both available...will do some more reading
Oh yes,both Santa's are looking my=uch better after a N feed,not as droopy and starting to grow noticeably.
The male shot out a pistil or six,so it looks like i saw wrong,what i thought were balls were actually pre pistil calyx's,definate pistils and no male bits...YAY WE HAVE A LADY!!!!!
The male shot out a pistil or six,so it looks like i saw wrong,what i thought were balls were actually pre pistil calyx's,definate pistils and no male bits...YAY WE HAVE A LADY!!!!!
So the chandelier Cfl's and wet floors annoyed me,and i was bored so i did the rebuild i have been putting off for so long.
I am knackered...absolutely,but i am done,well almost
I have scrubbed the cab head to toe,lined the bottom with heavy duty plastic(still to devise water drainage)
Replaced all damaged fans,added ducting to intake,removed the old light shield and rewired all 220v and 12v connections.
Also tidied the plug situation,funny how i have 3 multiplugs spare now?
Still to do is the smaller lightshield,will get some sheet metal tomorrow.
Plants spent the day outside and look none the worse for ware
BUILD PROCESS:
FINAL:
I am knackered...absolutely,but i am done,well almost
I have scrubbed the cab head to toe,lined the bottom with heavy duty plastic(still to devise water drainage)
Replaced all damaged fans,added ducting to intake,removed the old light shield and rewired all 220v and 12v connections.
Also tidied the plug situation,funny how i have 3 multiplugs spare now?
Still to do is the smaller lightshield,will get some sheet metal tomorrow.
Plants spent the day outside and look none the worse for ware
BUILD PROCESS:
FINAL:
Similar threads
