Lighting ? ideal 1212 holder or bjb for 200w 700ma driver

[Fitzy]

I just built a 16 piece cob light with 2 meanwell hlg-185-700ma for my 5x2. Im now looking for some solderless holders for this setup and i saw that the bjb are only rated for 150v and the ideal holders are rated at 250v, so could i use the ideals holder seeing as the hlg-185-700ma has 286v max i wouldnt mind using a different solderlesss holder, if someone makes a higher voltage holder. i have some normal holders and i dont like them so i would like to switch them out thanks in advance Fitzy

 

[BigSm0]

I just built a 16 piece cob light with 2 meanwell hlg-185-700ma for my 5x2. Im now looking for some solderless holders for this setup and i saw that the bjb are only rated for 150v and the ideal holders are rated at 250v, so could i use the ideals holder seeing as the hlg-185-700ma has 286v max i wouldnt mind using a different solderlesss holder, if someone makes a higher voltage holder. i have some normal holders and i dont like them so i would like to switch them out thanks in advance Fitzy

I can’t really help on this one. I know what I’d do and I also know what the specs are.

 

[Fitzy]

well what would you do, it would seem no one has any info on them on a 185-700ma the light is great i just dont like the way the solder connections look

 

[BigSm0]

You can check bender and wirth. Those are the only others I have used. Not sure their max voltage though. When running this many cobs in a single driver you may need to solder.

 

[Fitzy]

im using 2 hlg-185-700ma, so 1 driver to 8 cobs and im using solder now just dont like the looks otherwise this setup kicks ass way better than any other setup ive had. also do you do auto cobs in the citizen 1212 chip or is it just the 1818 or 1825 and wat are the specs on them how many watts/ how many ma/ how many par watts at those specs. You and growmou5e got me into the cobs so thanks, compared to my mars 600w (old style white one ), so thanks for helping blaze the way for us diyers. Fitzy