I grow photos and am researching auto's, but I think you all can use this idea.
I grow in a 4x8 tent and usually no more then 1 or 2 of various varieties each. what I did was got to the hardware store and buy some 2ft by 2ft plywood, 1 or 2 2inch square boards and some cheap half inch by whatever width board. and some drywall screws. trim the 2x2 plawood to fit your tent or not if not using the tent. measure the height of your pot and add whatever xtra height you feel comfortable working within and cut your 2x2 board to that lenth, 4 pieces per unit. screw those 4 boards to each corner of the plywood. at the top you'll need 3 pieces of the half inch stuff cut to the lengths and widths of you plywood and fasten those to the top, opposite the plywood, on 3 side. on top I staples some 2 inch by 3 inch garden fencing I had left over from this yeasr garden. now the pot will easily slid in and out for putting in new plants or removing old plants, you can literrilly pull the whole thing out to get better access to the plant for training by using the half inch stuff at the top as handles or even quickly remove any boys you happen to discover with no harm what so ever to the ladies. to build 4 of these it cost me about 36 USD and its MUCH better then the one 4x4 screen I had been using.
I will try to get some pics up later this weekend.
hope this helps someone.
I grow in a 4x8 tent and usually no more then 1 or 2 of various varieties each. what I did was got to the hardware store and buy some 2ft by 2ft plywood, 1 or 2 2inch square boards and some cheap half inch by whatever width board. and some drywall screws. trim the 2x2 plawood to fit your tent or not if not using the tent. measure the height of your pot and add whatever xtra height you feel comfortable working within and cut your 2x2 board to that lenth, 4 pieces per unit. screw those 4 boards to each corner of the plywood. at the top you'll need 3 pieces of the half inch stuff cut to the lengths and widths of you plywood and fasten those to the top, opposite the plywood, on 3 side. on top I staples some 2 inch by 3 inch garden fencing I had left over from this yeasr garden. now the pot will easily slid in and out for putting in new plants or removing old plants, you can literrilly pull the whole thing out to get better access to the plant for training by using the half inch stuff at the top as handles or even quickly remove any boys you happen to discover with no harm what so ever to the ladies. to build 4 of these it cost me about 36 USD and its MUCH better then the one 4x4 screen I had been using.
I will try to get some pics up later this weekend.
hope this helps someone.
