Mephisto Genetics 2x GWK and Auto Livers

[FishWizard]

Update day ??? (I'll have to go back and figure it out!)
Temps 75 - 82 F.
Humidity 50 - 60%
The girls are doing fine and I've made a few changes since the last update. I've added my old MarsHydro 300 to the grow shower as side lighting, as the GWK has continued to stretch under 2 AutoCobs, (plus additional side lighting from a 3rd cob in the space for the Amnesia Haze). It seems to have helped, but if I see anymore stretch it's time to super crop! She's 42 inches tall, and all of the lower half foliage has been removed. I also plan to re-do my Timber Light by changing it from a X shape 2 x 2, to a straight 4 foot with 2 added T-12 Flower Power UV lights. Because the FPs are so stong, I can only run them one at a time. So I'm also looking at a flowering T-12 led to use on the spare ballast! Anywho, on to the shitty pics!

Up first is a couple pics of GWK and she's just starting to get her pre-flower on. I started BE 4 days ago to encourage flower.

View attachment 1034686
View attachment 1034700

Next up is the Amnesia Haze CBD and she's doing much better since I upped her feed and added BE. Both plants in the shower are sharing the same feed btw.

View attachment 1034707

Finally, a group shot of the other girls. Notice the tight space that would be better utilized with a 4 ft light.

View attachment 1034713

Legs for days, Beautiful.

Thanks for stopping by!

 

[RivetGrrl]

Looking good still, the stretch is annoying I imagine. My auto's need to stretch more but I think they are where they will be, I'll have bonsai bushes
I'm always messing around with lights too, but I really need a PAR meter so I'm not guessing so much. Until then, I dream of affording COB's or some QB's to just add more.

 

[Need4Weed]

Things are blowing up in here. Everything looks great.

Nice to have lighting options, good luck with the new configuration.

Thanks for the encouragement @Roasty McToasty

Thanks for stopping by @FishWizard

Looking good still, the stretch is annoying I imagine. My auto's need to stretch more but I think they are where they will be, I'll have bonsai bushes
I'm always messing around with lights too, but I really need a PAR meter so I'm not guessing so much. Until then, I dream of affording COB's or some QB's to just add more.

I copied one of growmaus builds on my Timber. He used 5x cobs in a X shape, with the 5th cob in the center. But when he checked it with a par meter, the middle was too intense. So at the time, I thought that would work best for me. I've also used a light app to find the most desirable spots!

 

[RivetGrrl]

Thanks for the encouragement @Roasty McToasty

Thanks for stopping by @FishWizard

I copied one of growmaus builds on my Timber. He used 5x cobs in a X shape, with the 5th cob in the center. But when he checked it with a par meter, the middle was too intense. So at the time, I thought that would work best for me. I've also used a light app to find the most desirable spots!

I've heard those light apps are not too bad, I should try one just to see. Since I don't have several hundred just laying around for a meter

 

[Need4Weed]

Update day 49 - ish
Temps 75 - 82
Humidity 55 - 65%
I thought I'd post a few pics of the grow! GWK is filling up the shower!

Auto Livers is doing well too!

 

[Need4Weed]

Update day 56
Temps 75 - 85
Humidity 50 - 65%

The girls are doing ok, but one of my Timber diy cob lights bit the big one and I'm guessing the extra wattage is over powering the other 3. So I got a clip on fan blowing across the heat sinks! I also plan on adding a 4ft T-12 Flower Power UV in the spot in front of the grow shower. The GWK won't benefit as much as the Auto Livers, but it's suppose to be getting UV from the MarsHydro 400 that I'm using as side lighting anyways. The GWK has really taken off as I had to remove the yoyo hangers and put the AutoCobs on hooks. I'd guesstimate she's around 5 foot tall now!

Up next is the Auto Livers and thanks for stopping by!

 

[RivetGrrl]

Update day 56
Temps 75 - 85
Humidity 50 - 65%

The girls are doing ok, but one of my Timber diy cob lights bit the big one and I'm guessing the extra wattage is over powering the other 3. So I got a clip on fan blowing across the heat sinks! I also plan on adding a 4ft T-12 Flower Power UV in the spot in front of the grow shower. The GWK won't benefit as much as the Auto Livers, but it's suppose to be getting UV from the MarsHydro 400 that I'm using as side lighting anyways. The GWK has really taken off as I had to remove the yoyo hangers and put the AutoCobs on hooks. I'd guesstimate she's around 5 foot tall now!

View attachment 1040430

Up next is the Auto Livers and thanks for stopping by!

View attachment 1040433

Damn, looks like your gals are going to overgrow the shower! That Livers plant has grown huge since the previous update very nice indeed.

I keep hearing about people adding UV, I need to look into it but I already have so much going on light wise. I'm blowing the breaker now too often and have to balance the cycles in my tents so lights go off in one, on in another, and overlap in the last ones.

 

[Need4Weed]

Damn, looks like your gals are going to overgrow the shower! That Livers plant has grown huge since the previous update very nice indeed.

I keep hearing about people adding UV, I need to look into it but I already have so much going on light wise. I'm blowing the breaker now too often and have to balance the cycles in my tents so lights go off in one, on in another, and overlap in the last ones.

I ran a heavy duty extension cord to my grow area with a power strip attached after a breaker started blowing. Now the power that runs my fans and extraction is on that cord and all my lights is on a bathroom sink plug with a built in breaker in the socket. Now all it good!

 

[CrazyCat]

Beauties!!!

 

[jumper114]

What are the characteristics of auto livers? New strain? Sour livers and ... ?

Thanks for any info.