New Grower Roleadro COB--Rookie

[rick-j]

@Beerhunter CDN , @Closetflowers , just remembered you 2, and to every one that helped, thanks! I think I was in the Twighlight zone------ -------- We be just fine--- Day 36- Lollita seems to like the 26" height she is at this AM. Temp's at 73f--- RH at 37%. Bud sites with little pistols every were. I started some leave tucking so the lower bud sites can get some light. Still a little scared of cutting those big leaves off! I forgot to mention, last time I watered, after mixing the bubbled water with the AN nutes and the Cal-mag, the PH was at a perfect 6.5----TA-DA-- It sure makes a difference when you use those AN- Nute's correctly!

 

[rick-j]

and @SaltyReefer , Thank's for your support also! Getting smoky in here.

 

[SaltyReefer]

and @SaltyReefer , Thank's for your support also! Getting smoky in here.

Hey man, I’m learning right along with ya!

 

[bad dragon bzzz]

so you need to increase the humidity and increase temps ? no fear of it getting to warm ? it can get to humid if humidifier runs constant ?
i think they changed the name or model numbers itc 100 now ? that plugged into humidifier set at 50% the inkbird will take over control of the humidifier turning on on as needed keeping room/tent within a range of +/- 10% or 20%.
dont need to use the cooling side of the inkbird 308.so just plug a heater into it and set ranges c or f sorry im not good at the f.it will kick on/off the heater and keep things good
(i only have the 308,same logic should apply for the 312/itc 100 humidity unit)
good luck n keep er lit

 

[Beerhunter CDN]

@Beerhunter CDN , @Closetflowers , just remembered you 2, and to every one that helped, thanks! I think I was in the Twighlight zone------ -------- We be just fine--- Day 36- Lollita seems to like the 26" height she is at this AM. Temp's at 73f--- RH at 37%. Bud sites with little pistols every were. I started some leave tucking so the lower bud sites can get some light. Still a little scared of cutting those big leaves off! I forgot to mention, last time I watered, after mixing the bubbled water with the AN nutes and the Cal-mag, the PH was at a perfect 6.5----TA-DA-- It sure makes a difference when you use those AN- Nute's correctly!

I’m glad to see things are going well. You’ll get a nice harvest out of her for sure

 

[Tyler_Durden88]

@Tyler_Durden88 Thanks, I have low humidity problems, I needed the 312 Inkbird model. You and many others, I forget who, told me, I don't know why I ordered the 308??? My brain cells didn't do so well! @archie gemmill , I went further back in my journal, you told me exactly how to handle my problem and all about temp's and RH, I miss understood, very, very forgetful, thank you for your time and your pic's. I was thinking you plugged the extraction fan into the 308, ta-da, for some reason I thought that would help solve my low humidity problem. I can probably exchange that 308 for a 312. That my friends is how I learn!

If I where yoh I'd run the extraction fan 24/7 with your humidifier on 24/7 as well that will give you a consistant humidity. And use the controller to maintain a certain temp. I like my temp at 80 and my humidity at 55%.

 

[rick-j]

so you need to increase the humidity and increase temps ? no fear of it getting to warm ? it can get to humid if humidifier runs constant ?
i think they changed the name or model numbers itc 100 now ? that plugged into humidifier set at 50% the inkbird will take over control of the humidifier turning on on as needed keeping room/tent within a range of +/- 10% or 20%.
dont need to use the cooling side of the inkbird 308.so just plug a heater into it and set ranges c or f sorry im not good at the f.it will kick on/off the heater and keep things good
(i only have the 308,same logic should apply for the 312/itc 100 humidity unit)
good luck n keep er lit

That's ok, I just add a 5 to the c for f. We do have a bit of a language difference, but some how you all ways make it understandable, the pic's really help. I kinda live in the desert, almost 1 year, very low humidity, this is my first time I grew in this climate. but it d gets cold in the winter.

 

[bad dragon bzzz]

sorry not only am i from the uk,but from a lil corner thats a lil island off another lil island but still the uk.so i talk at 100mph with quite a twang and a bit of slang and far to much silly shit inbetween
i forget most of the time that some folk use goggle transistors,and i just make it awkward for them

 

[wagon]

Hello Rick-J

If your looking for a Inkbird humidity controller its the Inkbird IHC 200.
That is what I use in my room and it is an excellent humidity controller.

 

[bad dragon bzzz]

aha tell us more @wagon whats it connected to? what are the ranges ? anything else ?