New Grower Wedding glue, DIY light & box, arduino controlled, DWC, Canna aqua

[Inner peace]

Hi,

thank you for accepting my membership. Here is my first grow here (5th in my life).

I grow in my diy box, insulated, inside coated by Orca foil, outtake fan, air circulation fan. Inner diameters: 70*70*220 cm (cca 2.3*2.3*7.3fee)

My diy lights are
1) 1 chip Vero 29, C version 5000k 70cri
2) 3 chip Vero 29, C version 3000k 90cri

I use first one for grow, lot of blue light helps hold my flower short and wide and second one for flower

Light intensity is measured by my Iphone app called Photone - in tests measures +- 5% like Apogee - good enough for me

Nutrients - complete Canna aqua line, I use bluelab device to measure pH and EC. My tapwater is 0.6ec so i use distíled wateror rain water to dilute it to 0.4. In later stages of growth I will try torus hydro perfect pH capsule. In flower I use cc 80l(21gal) dwc tank - i can leave it without attention later. In groe i use cca 20l tank(5gal).

I made diy arduino controlling machine, now it senses - air temp and humidity, co2, water temp, and controls outtake fan and light - still in developement i want to add co2 enrichment, but i need much larger grow chamber, with at least dehumidifier or bether AC. I also want to collect data and sendit to thingspeak to have online monitoring in future.

 

[Inner peace]

Day 2 after sprouting.

I put it in small dwc tank, only little bit of grownuts and lot of rhizotonic, ec 0,6. My grow ligth ppfd is 300, 18hours light and 6hours dark

One more idea to say: i will be happy if you write me some ideas how to improve my settup or grow. I also love to read If you thing that Iam doing something wrong way.

 

[Talonxracer]

Nice little setup you have, and best of luck with the new girl!

I also made my own lighting setup using Samsung diodes on strips controlled by a Coralux controller, but use 2 AC Infinity fans and 67controller to take care of temp and humidity, not as integrated as yours!

 

[Inner peace]

Nice little setup you have, and best of luck with the new girl!

I also made my own lighting setup using Samsung diodes on strips controlled by a Coralux controller, but use 2 AC Infinity fans and 67controller to take care of temp and humidity, not as integrated as yours!

Hi,

thx, I will follow your thread, good luck bro.

 

[Inner peace]

Day 5 update

ppfd risen to 600, everything else is the same.

 

[Inner peace]

Book

Hi, today I will share this book, i foud a lot of new info for me.

I wish you the biggest buds ever !

 

[Inner peace]

Hi with update from day 7. Plant looks healthy but lied on ground so I added support. Maybe too much of light, or some other opinions?

 

[Inner peace]

I found answer, pH was 7.6 . I didnt expect such fluctuations. Since today I will check it daily. Corrrected to 5.5 ( Canna recommend 5,2 to 6,2)

 

[Inner peace]

Update day 10.

Firstroots came out of of hydroponic basket, so I put it in 20l (5gal)reservoir.

EC 0.9 my aim was 0.8 but shaking hand . I mixed my tapwater (ec 0.6) with rainwater (ec 0.1) to ec 0.4 due to recommendation of Canna.

Ph corrected to 5.8 - and now it should be cared by torrus hydro perfect pH capsule

Light - ppfd about 625. Blue one 5000k 70cri. I thing this shoud hold my flower down ,bushy with masive root mass and thick stem.

I also added some hydroton to suppoort

Best light to everyone!

 

[Inner peace]

One more update. Today is here a very hot weather. My water temp went in this settup up, so i adeed a peace of styrofoam under my bucket so fliwer is closer to light.

Now I could rapidly decrease power of light with even bether ppfd - now it is 700. I also added a peace of orca foil glued on cardboard on the bucket to reflect light out - photo included.