Urgent:Calcium deficiency or Lockout?

[draxcel]

is that each water all togeather

After Just One event

 

[Del boy]

Oh,Maybe I have to upp the quantity of runoff too.But Also have to Dial in the flush and restart ti fertigate at 0.5-0,7 EC as you Say.Do you let the starting water into the Total Ec or Just Nutrients EC of 0,5?

your starting water then 0.5 Of A&B yes the point of run off is to flush the plant each day to stop salt build up if you dont your ec will be getting higher as you are not flushing the old nutes out before adding new

 

[Del boy]

After Just One event

That is your problem not flushing enough and to high EC

 

[draxcel]

That is your problem not flushing enough and to high EC

I try to explain Better:After each event,I get like 100mls,It Is 4 times at day,5 h apart,at the end of the day I never let It collect all 24h long runoff,but should be about 400-500 ml max I think.
Anyway,I never seen EC rising,It was instead going Always down.Example:I used to put in 0.9Ec,the plant each Fertigation went down until She showed those lower leaves yellowing,and was 0.4 EC runoff.It was at this Moment I started with rising EC,flushing water through etc etc.
What Is your thought on this?
Flush with 0.5 EC water and 0.5Ec A+B to a Total of 1.0?

 

[Del boy]

I try to explain Better:After each event,I get like 100mls,It Is 4 times at day,5 h apart,at the end of the day I never let It collect all 24h long runoff,but should be about 400-500 ml max I think.
Anyway,I never seen EC rising,It was instead going Always down.Example:I used to put in 0.9Ec,the plant each Fertigation went down until She showed those lower leaves yellowing,and was 0.4 EC runoff.It was at this Moment I started with rising EC,flushing water through etc etc.
What Is your thought on this?
Flush with 0.5 EC water and 0.5Ec A+B to a Total of 1.0?

why is your starting water so high and you need more run off

 

[draxcel]

why is your starting water so high

Starting water Is Tap and has those average values except It comes out at 0.450 or 0.4 at times but never 0.495 as stated here
Municipal analisis

 

[Del boy]

Starting water Is Tap and has those average values except It comes out at 0.450 or 0.4 at times but never 0.495 as stated here
Municipal analisis
View attachment 1455968

ok so its not that good i see

 

[Del boy]

I try to explain Better:After each event,I get like 100mls,It Is 4 times at day,5 h apart,at the end of the day I never let It collect all 24h long runoff,but should be about 400-500 ml max I think.
Anyway,I never seen EC rising,It was instead going Always down.Example:I used to put in 0.9Ec,the plant each Fertigation went down until She showed those lower leaves yellowing,and was 0.4 EC runoff.It was at this Moment I started with rising EC,flushing water through etc etc.
What Is your thought on this?
Flush with 0.5 EC water and 0.5Ec A+B to a Total of 1.0?

Yes do that it should put it back into balance Flush with 0.5 EC water and 0.5Ec A+B to a Total of 1.0 PH 6.1 then just feed the same with plenty of run off

 

[draxcel]

Yes do that it should put it back into balance Flush with 0.5 EC water and 0.5Ec A+B to a Total of 1.0 then just feed the same with plenty of run off

Will update here in some days

Thank you so much @Dell boy for your EORT and patience,and time

 

[Del boy]

Will update here in some days

Thank you so much @Dell boy for your EORT and patience,and time❤

no problem take of the shit leaves as they wont get better and watch the new growth for improvement