Hello everyone, welcome to my first microgrow!
All comments and advice welcomed and much appreciated.
I will be growing one nirvana auto northern lights.
For my situation it was best for me to buy one of the 32" tall X 16" wide X 13" deep speakergrowboxes from speakergrowbox.com and modify it as needed.
I know its cheaper to build a box but my situation doesnt allow for me to do that under the radar.
I have added
100w blackstar led
I have seen a member here get good results with this light close to plants in a micro grow but i forget the name. edit: found it was @TimeTraveler
In my box its about 20in from light to top of the pot, if this turns out to be an issue i will switch to cfls
2 pc fans for exhaust with a diy carbon filter.
Thanks to @arty zan for the diy carbon filter guide.
2 pc fans for instake that are a little weaker than the exhaust.
3 pc fans for circulation inside the box that are the same as the intake fans.
Im using a half gallon fabric pot with 2 cups of kind soil and a top layer of roots organic.
Once she pops her head out i will add a top layer of sand(let me know your thoughts on the sand plz)
I used a papertowel to germinate.
She showed a taproot about two days later.
I then added her to a rapid rooter plug and into the pot today.
I dont know why the last pic is sideways and the first is fine? The 2nd pic is sidesways too but doesnt really matter.
All comments and advice welcomed and much appreciated.
I will be growing one nirvana auto northern lights.
For my situation it was best for me to buy one of the 32" tall X 16" wide X 13" deep speakergrowboxes from speakergrowbox.com and modify it as needed.
I know its cheaper to build a box but my situation doesnt allow for me to do that under the radar.
I have added
100w blackstar led
I have seen a member here get good results with this light close to plants in a micro grow but i forget the name. edit: found it was @TimeTraveler
In my box its about 20in from light to top of the pot, if this turns out to be an issue i will switch to cfls
2 pc fans for exhaust with a diy carbon filter.
Thanks to @arty zan for the diy carbon filter guide.
2 pc fans for instake that are a little weaker than the exhaust.
3 pc fans for circulation inside the box that are the same as the intake fans.
Im using a half gallon fabric pot with 2 cups of kind soil and a top layer of roots organic.
Once she pops her head out i will add a top layer of sand(let me know your thoughts on the sand plz)
I used a papertowel to germinate.
She showed a taproot about two days later.
I then added her to a rapid rooter plug and into the pot today.
I dont know why the last pic is sideways and the first is fine? The 2nd pic is sidesways too but doesnt really matter.
Last edited: