New Grower Making your own feminised auto seeds.

[steelrat]

Am i right in thinking it's pretty easy to do this with the following steps :

1. Make some colloidal silver mix.
2. Spray it over a female plant every few days.
3. The female plant grows male sacks.
4. The sacks grow out female seeds.

Is it that easy ?


Cheers,

steely

 

[HotBunz]

Not even close sir. After you make your colloidal silver a plant that just showed pistols is sprayed with the CS twice a day. It will take 2 weeks give or take before male pollen sacks start forming. You continue to spray twice a day till she/he is ripe and pollen start to fall. You then collect the pollen and use it to pollinate a DIERENT plant. You must spray CS on the whole plant that you want to change but you can pollinate only a single branch of the female plant so you don't have a whole plant with seeds.

This is the quick and dirty write up on it. There is considerable amount of information in the breeding forums here on AFN.

 

[pop22]

I saved this from a post by Yoda buds:

1. Yoda's condensed tutorial to make CS. First off you need to obtain the silver you will be using... Many places on the net to source 99.99 (if ya can get it, 99.999%) silver wires, you need two aprox 6" to 8" in length. Next you need a power supply you can either use one 9v battery (I see people stack them and use more, but why? We don't want to rush the process as we are aiming for smallest silver particles possible that the plant will be able to absorb, the higher the power supply the quicker the silver is released into the water and in larger particles) we want slow and easy folks, also you can get a power charger from old cell phone or a variable volt one from radio shack, preferably 600mha of lower and 3v to 9v, I've found in the 5.x range the sweet spot), if you go with battery you need to get a radio shack those clips that you connect a 9v battery to that have two wires coming off it, now either you can get fancy and solder the wires to the silver wires or can even just wrap the wire around the silver and use electrical tape... Now you have you CS generator.
   
   nect step is to make the brewing chamber... I found a quart mason jar works best... I than take the lid and use a nail to make three holes in the lid. One opposite from each other near the edge of the lid(these holes are where you'll put your wires which you want a few inches apart from each other so they don't touch) I than out a hole in the middle of the lid and this is where I run the air line with air stone through.....
   Now when putting the wires through the lid try to use something like tape on each side of the lid so the wires are not touching the lid(otherwise if they do it will use that metal as well creating rust and a mess) fill jar with distilled water turn power on... Now I let or sit for 24hrs the first 8to10hrs nothing really is required... But. Than you'll notice the silver wires becoming black, take them out and use a green scouring pad and wipe them off and put back in (may have to do it earlier than that but not frequent) as the ppms rise the quicker the wires will become dirty and the more often you'll have to wipe them.... Let this go for a day or so and your aiming for a ppm of 20+ no need to go higher than 25 IMHO. Also I've used the plastic containers maragin comes in to make smaller batches and I think the lid is nicer as it's plastic and no worries about the other metal...
   
   That's pretty much the dumb downed tutorial on CS....
   
   not only do you now know how to make CS to reverse plants you can now how a very powerful antiseptic/biotic to help use in the upcoming zombie apocalypse. -

Here are some of your answers I hope any more feel free to shoot them out… You want to spray the plant preferably during lights out so you don't burn them… When spraying the plant you want to give it a very good misting almost to the point of dripping off… best is to get underside of leaves as much as possible and be sure to hit those pre flower areas really good… I think best is to spray twice a day, any more really is not needed. Also keep in mind not to overwater during this time… I put the CS in a dark spray bottle you can get at wally world in the health and beauty dept holds like 4oz i think i set it to mist, For an autoflower you want to begin spraying as soon as you see the FIRST sign of a pistil… Than continue on for a a few weeks, during this time you may still see the plant looking like its flowering, dont worry keep on spraying, when you see you start getting sacs in about two to three weeks keep on spraying for a few four/five more days to be sure the reversal takes hold (also not bad to spray it again here and there before it starts to drop pollen) As far as a photoperiod you would start spraying from day1 of putting her into 12/12… and its the same process, I've used aprox for a good side plant about a pint per plant did me good.

 

[pumpkinn12344]

Sorry about that I reposted on the new grower forums. I had a feel you guys are pros so wanted you to check it out

 

[401BIGSM0KE]

so hold up all you gotta do is spray that silver cord. spray stuff on autoflowers to breed fully auto seeds?? is that what your saying pop??

I saved this from a post by Yoda buds:

1. Yoda's condensed tutorial to make CS. First off you need to obtain the silver you will be using... Many places on the net to source 99.99 (if ya can get it, 99.999%) silver wires, you need two aprox 6" to 8" in length. Next you need a power supply you can either use one 9v battery (I see people stack them and use more, but why? We don't want to rush the process as we are aiming for smallest silver particles possible that the plant will be able to absorb, the higher the power supply the quicker the silver is released into the water and in larger particles) we want slow and easy folks, also you can get a power charger from old cell phone or a variable volt one from radio shack, preferably 600mha of lower and 3v to 9v, I've found in the 5.x range the sweet spot), if you go with battery you need to get a radio shack those clips that you connect a 9v battery to that have two wires coming off it, now either you can get fancy and solder the wires to the silver wires or can even just wrap the wire around the silver and use electrical tape... Now you have you CS generator.
   
   nect step is to make the brewing chamber... I found a quart mason jar works best... I than take the lid and use a nail to make three holes in the lid. One opposite from each other near the edge of the lid(these holes are where you'll put your wires which you want a few inches apart from each other so they don't touch) I than out a hole in the middle of the lid and this is where I run the air line with air stone through.....
   Now when putting the wires through the lid try to use something like tape on each side of the lid so the wires are not touching the lid(otherwise if they do it will use that metal as well creating rust and a mess) fill jar with distilled water turn power on... Now I let or sit for 24hrs the first 8to10hrs nothing really is required... But. Than you'll notice the silver wires becoming black, take them out and use a green scouring pad and wipe them off and put back in (may have to do it earlier than that but not frequent) as the ppms rise the quicker the wires will become dirty and the more often you'll have to wipe them.... Let this go for a day or so and your aiming for a ppm of 20+ no need to go higher than 25 IMHO. Also I've used the plastic containers maragin comes in to make smaller batches and I think the lid is nicer as it's plastic and no worries about the other metal...
   
   That's pretty much the dumb downed tutorial on CS....
   
   not only do you now know how to make CS to reverse plants you can now how a very powerful antiseptic/biotic to help use in the upcoming zombie apocalypse. -

Here are some of your answers I hope any more feel free to shoot them out… You want to spray the plant preferably during lights out so you don't burn them… When spraying the plant you want to give it a very good misting almost to the point of dripping off… best is to get underside of leaves as much as possible and be sure to hit those pre flower areas really good… I think best is to spray twice a day, any more really is not needed. Also keep in mind not to overwater during this time… I put the CS in a dark spray bottle you can get at wally world in the health and beauty dept holds like 4oz i think i set it to mist, For an autoflower you want to begin spraying as soon as you see the FIRST sign of a pistil… Than continue on for a a few weeks, during this time you may still see the plant looking like its flowering, dont worry keep on spraying, when you see you start getting sacs in about two to three weeks keep on spraying for a few four/five more days to be sure the reversal takes hold (also not bad to spray it again here and there before it starts to drop pollen) As far as a photoperiod you would start spraying from day1 of putting her into 12/12… and its the same process, I've used aprox for a good side plant about a pint per plant did me good.

 

[401BIGSM0KE]

nvm i see top post now but still its seems pretty easy?? so u cant just use seeds from the plant you reversed?? u gotta offspring it or pollinate another tree for pollen to b fullyauto fems.. sry im new n been curious bout breeding autos thanks in advance

 

[pop22]

so hold up all you gotta do is spray that silver cord. spray stuff on autoflowers to breed fully auto seeds?? is that what your saying pop??

In short, yes thats exactly right. the only thing hard about it is getting the timing right. Also, you can't use the plants that were sprayed for anything after you've collected the seeds.

 

[pop22]

In short, yes thats exactly right. the only thing hard about it is getting the timing right. Also, you can't use the plants that were sprayed for anything after you've collected the seeds.

l re-read this question and the answer I think that’s needed is, coloidal silver has nothing to do with the plant being auto or not. However, whatever type plant you do this with, they will produce all female seeds.

 

[401BIGSM0KE]

ya meaning that the plant will have no budsss the sprayed reverse one is only gonna b good for seeds

 

[401BIGSM0KE]

ya so what im saying i got an auto right i wanna start breeding seeds from. i spray reverse on it until it starts flowering and dropping pollen o n also i wait for first piston to show.. but outcome will be from reversed plant that was a fem auto is seeds that are exact replica auto fems? am i right and thanks pop