Dinafem DinaMed auto CBD and cheese auto CBD with autopots and biotabs

[Only1Sky]

The anticipation is mounting ... can't hardy wait to see it with plants growing.

 

[Bodacious Budmonster]

The anticipation is mounting ... can't hardy wait to see it with plants growing.

Glad to have you around.

Just monitoring the groom temps etc and the controller is keeping it around 28c under the light temps at the moment, so naturally humidity is around 40 to 50 due to in and outtake working hard to keep temps down.
It’s fairly warm outside.

I have added an additional oscillating fan to move the air and aimed the wall fan above the light to get some air circulation

I dont think I can bring the temps down and they will have to do.
I will put a humidifier in there too as I don’t want the plants drinking to much to start with.

Here are some screen shots of the netatmo which the outdoor monitor is above the light far side and the indoor one is sat on the floor of the groom

 

[Bodacious Budmonster]

I tell a lie.
I have adjusted it from 600wSL to 400w
Just to see if that helps with the temps.

I don’t need 600 just yet.

 

[Boradan]

Glad to have you around.

Just monitoring the groom temps etc and the controller is keeping it around 28c under the light temps at the moment, so naturally humidity is around 40 to 50 due to in and outtake working hard to keep temps down.
It’s fairly warm outside.

I have added an additional oscillating fan to move the air and aimed the wall fan above the light to get some air circulation

I dont think I can bring the temps down and they will have to do.
I will put a humidifier in there too as I don’t want the plants drinking to much to start with.

Here are some screen shots of the netatmo which the outdoor monitor is above the light far side and the indoor one is sat on the floor of the groom

View attachment 919522
View attachment 919524 View attachment 919526 View attachment 919527 View attachment 919528 View attachment 919529 View attachment 919523

Almost looks as good as my Google Sheets chart

 

[Bodacious Budmonster]

Nice, what are you using?

The good news is that the temps have dropped since I reduced light power.
However I still need to control this when I want to use 600w and also I tend to have my lights on 24/0

Probably not the best combo on the plants if they end up drinking to much to compensate, that’s my thinking anyway

 

[Boradan]

It's only a Chart from manually entered Data into google sheets.
Nothing in the slightest bit fancy.

Use this chart.
Shows you the good ranges for temp and humidity in conjunction with each other:

You want to keep your readings in the bold text area each week.

 

[Bodacious Budmonster]

Thanks

Re: your sheets, it’s impressive you have taken the time and care to manually fill it in, I think that trumps mine for that reason alone.

 

[Boradan]

Not much to record:

Takes 2 minutes to fill it in. Worth the effort IMO

 

[Bodacious Budmonster]

It is.....

 

[Bodacious Budmonster]

We are off guys.....

Well, seeds have germinated and are in their new home

Biotabs have been implemented in the coco

And last but least
The autopot has some root control