Ok guys heres the first step of my auto pot journey I hope this help anyone looking into coco or auto pots.... either through my success or failure here we go
I'm using botanicare coco brick from amazon.
I got the brick in and placed it in a tote (5kg brick)
I put 12 Liters H20 straight from the tap in the tote and it broke up perfectly with a little work. Let sit 10 to 15 min at a time then crumble and mix again til all the way broke up
Then I put the amount needed in the actual auto pot and flush for 3 min with the hose on full blast. The first 20 seconds or so the water was brown / Cloudy, after that it was clear just getting the extra flush
I'm using 3 of the 4 pots so I filled the bucket and repeated the process 3 times, and after each wash I squeezed out the extra water and dumped into a separate tote to dry and "fluff"
Next I added the perlite after I rinsed it also. I know it's over kill but wanted to be sure I didn't skip any minute detail .... then I mixed with coco at a 70/30 coco/perlite mix
I then put the amount of hydroponic pebbles needed to put 5cm deep pebbles in the bottom of each autopot in a pot and rinsed it throughly as well.
This is all set aside til I get my extra tubing tom from lowes and I'll post exactly how I full my pots..