After a reasonable first grow of widow auto that turned into an incredible smoke, its time to start again,
Though due to limited funds this grow is a bit of a hotpotch ...
The widow auto is in a 70/30 coco, perlite mix, while the strawberry blue is in a 60/40 coco, clay pebble mix..
Both are in 25ltr fabric pots..
The tent is 60 x 120 x 180
Using a 1000w bestva led lamp, it has 100 x 10 w bidgelux / epileds stated at 185w draw..
Have a 184 cfm extractor using 5 inch conduit through a buddy products carbon filter vented through an external wall.
Two 6 inch fans for circulation inside the tent, a small humidifier. A 40 watt tube heater inside the tent and a 250 watt convention heater inside the room the tent is.. also have a small dehumidifier to use during peak flower growth, i had issues with the relative humidity raising above 70 % during the last grow..
The grow environment is quite controllable.. usually have a 3 c difference in lights on and lights off..
Maintaining 27c and 40 % rh at the moment
Have a blue lab ec trucheon, ph pen
Ph up and down fluids. Ph 7 and 4 buffer
Am using the same fox fams nutrients trio as the last grow. Big bloom, grow big , tiger bloom..i only used around a 1/3 of each 1ltr bottle on the last grow, and vitalink cal/mag supplement,
Im hoping to veg the strawberry until the widow is finished then flip the lights to flower the strawberry.. the last run of widow was 81 days..
Have the lights on a 20/4 cycle. Helps to keep a reasonable temp without the need for extra heating.
Im looking forward to any helpful tips / advice.
I've included a pic of the last widow i grew, managing 3 oz of dried smoke of each one.. hoping to improve on that this time round,
Sent from my SM-G920F using Tapatalk
Though due to limited funds this grow is a bit of a hotpotch ...
The widow auto is in a 70/30 coco, perlite mix, while the strawberry blue is in a 60/40 coco, clay pebble mix..
Both are in 25ltr fabric pots..
The tent is 60 x 120 x 180
Using a 1000w bestva led lamp, it has 100 x 10 w bidgelux / epileds stated at 185w draw..
Have a 184 cfm extractor using 5 inch conduit through a buddy products carbon filter vented through an external wall.
Two 6 inch fans for circulation inside the tent, a small humidifier. A 40 watt tube heater inside the tent and a 250 watt convention heater inside the room the tent is.. also have a small dehumidifier to use during peak flower growth, i had issues with the relative humidity raising above 70 % during the last grow..
The grow environment is quite controllable.. usually have a 3 c difference in lights on and lights off..
Maintaining 27c and 40 % rh at the moment
Have a blue lab ec trucheon, ph pen
Ph up and down fluids. Ph 7 and 4 buffer
Am using the same fox fams nutrients trio as the last grow. Big bloom, grow big , tiger bloom..i only used around a 1/3 of each 1ltr bottle on the last grow, and vitalink cal/mag supplement,
Im hoping to veg the strawberry until the widow is finished then flip the lights to flower the strawberry.. the last run of widow was 81 days..
Have the lights on a 20/4 cycle. Helps to keep a reasonable temp without the need for extra heating.
Im looking forward to any helpful tips / advice.
I've included a pic of the last widow i grew, managing 3 oz of dried smoke of each one.. hoping to improve on that this time round,
Sent from my SM-G920F using Tapatalk