MarsHydro Live Section

[Marshydro]

First post of 2022, let the FC6500 shine on the girls!

 

[Marshydro]

Did you all have a good Christmas?

 

[JSH1973]

Did you all have a good Christmas?

Excellent Xmas yes, plenty of friends and weed and good vibes :smoking:
Hope yours were as good

 

[Bob's Auto's]

Did you all have a good Christmas?

Thanks for asking buddy
Did you guys celebrate Christmas? You'll have to wait a little longer to celebrate New Year, but it's always a "bang" I assume
In any case, I hope you and your family are healthy and happy together and be so in 2022

We had a super fine diner with the family and it's always considered a successful party if you have one really drunk uncle in the room



Regards,

Bob

 

[Marshydro]

Installation And Tutorial Of Inline Duct Fan Kit

Air circulation is important for indoor growing. Indoor cannabis plants are usually grown in a relatively sealed environment, such as a closet, tent or room dedicated to growing. A fresh air supply helps cannabis grow quickly and protects the plants from certain pests and molds.

Mars Hydro Inline Duct Fan can provide fresh air to your sealed growing environment. They offer four and six inch fans with different controllers. You can choose the right fan according to your growing area and needs. This article serves as a tutorial to demonstrate how to install and use Mars Hydro inline duct fan kit inside a tent.
All items in the kit
Clamps, Screws, Belts, Probe Sensor, Thermostat Controller, Carbon Filter, Fan, Duct


Installation Procedures
Step 1: Hang the fan and filter
Hanging the filter and fan to the same height, then connect them. When connecting you can also cut down part of the duct to connect the filter and the fan, which will be more sturdy.


If you do not know how to tie the belts, please refer to the tutorial below. This method of tying the belts makes it easy for you to adjust the height.


Step 2: Connecting the fan to the duct
Connect the fan to the duct and secure them with the climp. Be careful when using the climp, it is sharp.


Step 3: Connects the fan to the controller
Connect the sensor and fan to the controller, remove the cap before you use the probe. Then power on and you can use it.


The fan and carbon filter can be moved into position to suit your needs. For example, On the inside, top or side of the tent.


Thermostat Controller Tutorial
Button diagram:


The controller has four modes, The following steps teach you how to operate the controller.
ON MODE:
Fan keeps working at set speed
Fan speed can be adjusted from 1 to 10
O MODE:
Fan won't work
Press UP/DOWN buttons to adjust display brightness
Press UP/DOWN buttons at the same time for 3s to convert Fahrenheit to Celsius
Press the MODE button and LEAF button to rectify the probe temperature and humidity
TIMER MODE:
Set the fan's working time, with a countdown
Fan works at the speed you set in ON MODE
AUTO MODE:
4 Triggers can be set: High/Low Temperature, High/Low Humidity
When the probe temp/humidity exceeds the set ones, the fan will automatically work till the probe temp/humity is the same with set ones.
Above is the full tutorial of the fan set. Meanwhile, we have created an installation video. Through the video you can be more clear about the installation and use of the inline duct fan set.



If you have questions, leave your comments and we will answer them for you.

 

[Marshydro]

What size grow tent for 4 plants?

As more states legalize weed growing and cannabis products price rise, more people start to join the cannabis community. The first thing to know is that cannabis is in strict need of the environment. Apparently, it’s hard to manage in living houses. As a result, grow tents come in as excellent solutions.

The only question is, what size grow tent do I need in my case?

• What size grow tent for 1 plant?
• What size grow tent for 2 plants?
• What size grow tent for 4 plants?
• What size grow tent for 6 plants?
• What size grow tent for 8 plants?

How Much Space Does One Weed Need?
No matter how many plants you want to grow, or how much space you have available for them, you need to know how much area one weed needs as the first step for your indoor gardening. In general, how big cannabis can grow depends on many factors, such as training, root system... So the weed plants here are mature cannabis without training(or with simple training), grown in 3 or 5 gallon grow bags (the most widely used grow bag sizes).

A 3 or 5 gallon grow bag is 27 or 32 cm in diameter. An adult plant will be larger than the grow bag, about 16-17 cm larger. Therefore, an adult plant typically requires a flat space diameter of 43-49 cm (1.4-1.6 ft). In addition, you will need space for some equipment such as humidifiers, dehumidifiers, heaters, fans ... So, all things considered, 2x2 feet is the space needed for a weed to grow to adulthood.

What Size Grow Tent In My Case?

After knowing how much space an adult plant needs, you can very easily figure out how much space you need for your cultivation. The sizes of the common grow tents on the market are also based on this algorithm.

We Mars Hydro indoor grow tents provide the following sizes: 2x2ft, 2.3x2.3ft, 2x4ft, 3x3ft, 4x4ft, 5x5ft, 4x8ft, 8x8ft...Can you figure out how many plants they can contain? Here is a picture to explain to you how large an area is needed for 2,4,8 plants.


How High Should My Grow Tent Be?
In addition to the horizontal space, the vertical space - height is an important role as well.

First, you need to take into account the distance between the light and the top - space for other equipment such as inline fans, carbon filters, ducting, etc. - one foot should be sufficient. The distance between the light and the plant canopy - depends largely on what grow lights you are using, and the vendor's recommended hanging height - we recommend you leave 8-24 inches. That's a total of 2-3 feet.

Then there's your weed plant. Cannabis can grow up to 13 feet tall in nature, but in a typical indoor grow, it's best to keep them under 1 meter (3.2 feet) with training.

In conclusion, you need a tent that is 5.2-6.2 ft. (158-189 cm)

The common 200 cm high grow tent on the market can perfectly meet your needs. And when you use some training techniques such as hitting the top or bending over ...... A 180 cm high tent is also just right. Of course, if your weed plant is a dwarf species, a 160 cm tent is also enough.

What Size Grow Tent For 4 Plants?

Finally, we have the conclusion, a 4x4x6.5ft (120x120x200cm) grow tent is the best choice for 4 weed plants.

In this way, we can know what sizes of grow tents are needed for different numbers of plants. Likewise, it is possible to speculate how many weed plants can be planted in common grow tents on the market.


Are There Any Exceptions?
As we mentioned at the beginning, the results of this calculation are based on weed plants planted in 3 or 5 gallon grow bags with only simple training.

If you grow the plant in an 80 gallon grow bag, the root system will be much bigger and so will your cannabis be - much bigger and taller.

If you use the training method - SOG (grows many small cannabis plants at once). For example, if grow 20 plants in 1 square meter space, then one plant will need only 0.05m2, (0.75x0.75ft approximately)

Well, some may ask, “Will it affect if I grow autoflowers?” The auto is no different from the common plant, except that some varieties may be shorter, so it does not prevent you from buying the common grow tents.


After knowing the size of grow tents in your case, it's time to pick up a quality grow tent. Check out Mars Hydro Indoor Grow Tents to start a happy shopping tour!

 

[JSH1973]

Subject to opinion of course but I 100% Agree with the 4x4x6or7 chouce

NEXT CHALLENGE:

Pick the Mars Hydro Lights needed for your grow and grow style chosen, in that tent for those 4 plants :smoking:

 

[Marshydro]

Guess which model it is

 

[blue]

Guess which model it is

FC4800 ?

 

[Marshydro]

FC4800 ?

Close to the correct answer. It has 8 light bars