:thumbs:Hey Guys,
This will be my first ever indoor grow, I have experience growing outdoors with limited results (Mainly due to the UK weather!).:no:
I live in a shared house, This HAS to be a stealth operation!
My room is a converted Loft room, The temps are pretty stable as it is centrally heated, The ventilation is Awesome, Opposite windows create a proper breeze!
I Will be growing in a cupboard, Removed a couple of shelves, Mylar'd the place up, went a bit crazy with the duct tape lol, lets say im no Nick Knowles but its deffo waterproof:clap:
The dimensions are as follows:
H 44" x w 27" x D 25" or 3.8ft x 2.3 ft x 2ft
At the mometn the light is hanging using the clips provided from a hook screwed into the roof of the cab
height from light to bottom of cab is 27" and the distance from top of light to top of cab is 15" - this can be raised at least 5-8 inches depending on the extraction set up
1 x MS006 from Grow Northern
1 x 4" Rhino C/Filter
Still need to purchase the extraction fan , Got a Digical PH tester pen, A thermo/humidity reader
Plant magic Soil
Bio bizz bloom and grow nutes
The seeds, 5 x fem 8 Ball Kush (DNA) & 3x Fem White widow (DP)
I really need some advice on sorting out airflow as i really can not be cutting holes in the exterior cupboard doors, I can cut holes in the inside part tho, Eg from the left (Grow) cupboard innto the adjoining (Clothes) cupboard and if need be leave this door open?
The Carbon filter i much bigger than i anticipated, Is it best inside the grow room? There is a shelve directly above the grow room that the lights hang from, the Filter fits just about up there?
Would i be best cutting a 4" hole behind one of the light hooks in the roof of the grow room (MDF) and ducting the air out? leaving the filter obviously still in the grow room?
Once i do up the zips on my plastic doors it is totally light tight, Ill need to make a few smaller holes thru into the adjoing cupboards for intake, this will have to do im afraide as Stealth is key..
Im planning on cracking 8 seeds and aiming for a SOG style, I think as i have a few ventilation restrictions the less vegetation the better! I left the lights on for a couple of hours with the zip and door closed and it got warm (not hot) in there- temps read 83 and humidity was 34% - once the plants and ventilation is added ill take truer readings, I will be adding a clip on fan or two for air circulation
Ill be doing 12/12 from seed no doubt for the above reasons, aiming for 8-10grams per plant, anything over 20z total dry is perfect for me!
At the moment i pay £375 per Oz roughly, all in twenty bags (1.5grams) so 20z will save me £750 at least peer harvest
I ideally want the lights and fans on when im in, So prob gonna chucke them on about 6pm and off at 6am when i get up for work!
Sorry for the long[ ass start - any advice on the ventialtion would be very helpful! Also advice on pot size for 8 seeds in that space would be great, i may be able to give them 3-4 days of 20/4 before i return to work too..
Heres some pics of my DIY Job! and the lights - jeeeezuz its bright, that mylar is bloody reflective stuff:jaw::jaw: ps apologies for awful photo quality - cant find my Digital cam!!
This will be my first ever indoor grow, I have experience growing outdoors with limited results (Mainly due to the UK weather!).:no:
I live in a shared house, This HAS to be a stealth operation!
My room is a converted Loft room, The temps are pretty stable as it is centrally heated, The ventilation is Awesome, Opposite windows create a proper breeze!
I Will be growing in a cupboard, Removed a couple of shelves, Mylar'd the place up, went a bit crazy with the duct tape lol, lets say im no Nick Knowles but its deffo waterproof:clap:
The dimensions are as follows:
H 44" x w 27" x D 25" or 3.8ft x 2.3 ft x 2ft
At the mometn the light is hanging using the clips provided from a hook screwed into the roof of the cab
height from light to bottom of cab is 27" and the distance from top of light to top of cab is 15" - this can be raised at least 5-8 inches depending on the extraction set up
1 x MS006 from Grow Northern
1 x 4" Rhino C/Filter
Still need to purchase the extraction fan , Got a Digical PH tester pen, A thermo/humidity reader
Plant magic Soil
Bio bizz bloom and grow nutes
The seeds, 5 x fem 8 Ball Kush (DNA) & 3x Fem White widow (DP)
I really need some advice on sorting out airflow as i really can not be cutting holes in the exterior cupboard doors, I can cut holes in the inside part tho, Eg from the left (Grow) cupboard innto the adjoining (Clothes) cupboard and if need be leave this door open?
The Carbon filter i much bigger than i anticipated, Is it best inside the grow room? There is a shelve directly above the grow room that the lights hang from, the Filter fits just about up there?
Would i be best cutting a 4" hole behind one of the light hooks in the roof of the grow room (MDF) and ducting the air out? leaving the filter obviously still in the grow room?
Once i do up the zips on my plastic doors it is totally light tight, Ill need to make a few smaller holes thru into the adjoing cupboards for intake, this will have to do im afraide as Stealth is key..
Im planning on cracking 8 seeds and aiming for a SOG style, I think as i have a few ventilation restrictions the less vegetation the better! I left the lights on for a couple of hours with the zip and door closed and it got warm (not hot) in there- temps read 83 and humidity was 34% - once the plants and ventilation is added ill take truer readings, I will be adding a clip on fan or two for air circulation
Ill be doing 12/12 from seed no doubt for the above reasons, aiming for 8-10grams per plant, anything over 20z total dry is perfect for me!
At the moment i pay £375 per Oz roughly, all in twenty bags (1.5grams) so 20z will save me £750 at least peer harvest
I ideally want the lights and fans on when im in, So prob gonna chucke them on about 6pm and off at 6am when i get up for work!
Sorry for the long[ ass start - any advice on the ventialtion would be very helpful! Also advice on pot size for 8 seeds in that space would be great, i may be able to give them 3-4 days of 20/4 before i return to work too..
Heres some pics of my DIY Job! and the lights - jeeeezuz its bright, that mylar is bloody reflective stuff:jaw::jaw: ps apologies for awful photo quality - cant find my Digital cam!!
Last edited by a moderator: