- Joined
- May 5, 2018
- Messages
- 6,092
- Reputation
- 6,106
- Reaction score
- 27,511
- Points
- 0
- Age
- 52
- Currently Smoking
- White widow
Upon further inspection of the ratchet hangers I noticed the inner workings are metal! Wow, never seen metal gears and levers in my other hangers! Nice quality but still smoother action than the others I have!
back to the light for a moment. The unit comes installed with a manual driver. Nice knob and smooth action. 10 “clicks” in its range… off to full throttle. I assume it is 10%increase per position. I did notice while inspecting that the dimmer box was affixed with double sided adhesive film that no longer has “sticky” to it. This will not affect the operation in the least and cannot move much further from the position it’s in due to the excellent wiring job done by the assembly team.
on to installation!
the wire hangers are a touch long for my installation and growing style so… I removed the carabiner clips from the wire hangers and installed them directly in the hanger holes in the panel. Noticing that the board was finished after mounting holes were drilled, very nice!
my iPhone doesn’t show the subtle changes in intensity of light. First pic is “10%” last pic is full on…
Also the iPhone doesn’t show the true brightness of the unit. It is blinding. Definite upgrade from the 3 smaller units it replaced. Installation also tidied up my wiring going to the power strip… bonus!
well, that’s it for now. Will get to testing the light with my photone app after it is calibrated to the 600r, mid morning to afternoon. STAY TUNED!
back to the light for a moment. The unit comes installed with a manual driver. Nice knob and smooth action. 10 “clicks” in its range… off to full throttle. I assume it is 10%increase per position. I did notice while inspecting that the dimmer box was affixed with double sided adhesive film that no longer has “sticky” to it. This will not affect the operation in the least and cannot move much further from the position it’s in due to the excellent wiring job done by the assembly team.
on to installation!
the wire hangers are a touch long for my installation and growing style so… I removed the carabiner clips from the wire hangers and installed them directly in the hanger holes in the panel. Noticing that the board was finished after mounting holes were drilled, very nice!
my iPhone doesn’t show the subtle changes in intensity of light. First pic is “10%” last pic is full on…
Also the iPhone doesn’t show the true brightness of the unit. It is blinding. Definite upgrade from the 3 smaller units it replaced. Installation also tidied up my wiring going to the power strip… bonus!
well, that’s it for now. Will get to testing the light with my photone app after it is calibrated to the 600r, mid morning to afternoon. STAY TUNED!