Just placed a big order.. I am stoked! I finally get to finish up my cabinet!
I got a VenTech 4" fan, a speed controller, a 4x12 phat filter, ducting and vent covers, a ph pen, calibration solutions, and a bottle of cal mag.
I will be doing some pretty cool stuff with my ventilation.
I will be building a secondary box, which will be on top of the cabinet. The fan and filter will be all hung up inside this upper chamber. Holes will be cut in the top of the cabinet itself (bottom of the air chamber) for airflow to the filter. This will vent out of the side of the upper box. I may line the inside of the air box with carpet to cut the noise down.
Inside the main cabinet, the intake will run from the bottom, perhaps about a foot off the floor, with a hose pointing downward. It will run outside the box and then through the wall, into my bedroom closet. The Idea is to bring cool (or warm in winter) air in from the house to control cabinet temps. The box is in the garage, which gets up to 100 degrees or more in the summer, so I hope that the cool inside air will be able to maintain temps inside the box.
I can't wait to finish the build! I'm sure I will start a thread and share it with everyone.