Lighting can you run say 70v cob and 36v off same driver?

[Fitzy]

so I'm going to do a build but want to run 2 70v vero se along with 4 citizen 1212 36v on a meanwell 700ma 286v driver in series is that possible to do? this will be for the out side with either 3 100w chilled pcb pucks on a hlg-320 or hlg-240 which I already have but not sure. only have a 2x4 area right now but will be used in a 4x4 when space allows so only want 1 light. I figure I could use cobs for veg then pucks to flower in 2x4 then turn both drivers on in 4x4? any ideas or suggestions lmk thanks
parts I have 10 1212 citizens, 8 cxa 2540 and 1 cxb 3590 for cobs I have 2 hlg-185-700ma and 1 hlg-240-1400ma

 

[Black Sail]

so I'm going to do a build but want to run 2 70v vero se along with 4 citizen 1212 36v on a meanwell 700ma 286v driver in series is that possible to do? this will be for the out side with either 3 100w chilled pcb pucks on a hlg-320 or hlg-240 which I already have but not sure. only have a 2x4 area right now but will be used in a 4x4 when space allows so only want 1 light. I figure I could use cobs for veg then pucks to flower in 2x4 then turn both drivers on in 4x4? any ideas or suggestions lmk thanks
parts I have 10 1212 citizens, 8 cxa 2540 and 1 cxb 3590 for cobs I have 2 hlg-185-700ma and 1 hlg-240-1400ma

If you wire them in series you can put LEDs with different forward voltages on the same string, as long as the added up forward voltage of all the LEDs on the string falls within the output DC Voltage range of the driver you're using. If you wire them in parallel each string needs to have the exact same forward voltage.

 

[Fitzy]

Thanks that makes my it ssimple for me to make the call on wat im gonna run