Light from passive air flow

Dutch Passion Lemon Z
Blog entry Discussion
Since my grow tent is in a place where I have light when the plants are in the dark period and no matter what flap configuration I use I still have light coming in.

On the beginning I didn’t care too much and just ripped a txirt in half and used it as a long coat and it worked but today DIY’ed a little more and used a kitchen filter, some staples, the same txirt and made a perfect joker :cools: fit.

Nows let’s C if it works and if it won’t restrict the air flow 2much.
1st signs should be increasing temp and hum and extra neg pressure right?

What other solutions u guys found?
06913E59-CBD7-4356-B816-E553CF719220.jpeg
926D0E32-3AD9-4416-94EC-5E0B2C1B7024.jpeg
45758996-7092-4BEC-AE2F-FE3900E7A3A3.jpeg
400B883E-A9AA-4A49-8296-D7C136CA7C83.jpeg
0F72D708-9C0B-407B-A54A-CEF98D8503ED.jpeg

Comments

EP3
Having the same issue my self, but the other way around. Mrs is complaining about light coming out. I think, not know, that with autos you can get away with a little light without problems? Other people in the know should have an answer.
I do know that with passive ventilation air takes the easiest route, so any restriction will greatly reduce air flow. Even an open door will effect it..i.e big open door to go out or a 4-6 inch hole. Most of the air flow will be directed towards door and into hall or similar. Thats why folks add exhaust fans to create a negative atmosphere in the tent encouraging air to be drawn in from the room the intake vent is in.
 
automan2
Light leaks are not an issue with autos. I always have a photo growing with my autos and though my passive tent vents bleed ambient light, still no problem...An inkbird controls intake and exhaust fans to keep parameters in spec. Exhaust is on full time with intake alternating between outside ambient air & inside passive per temperature control. Kinda makes my tent automatic...just have to feed .
 
Last edited:
EP3
Exactly what I did with the extract, 4inch into a 90 small straight of pipe into another 90 into void above space that has a vent. Planning on a 90in into a 45 then out. Also gonna take mylar off floor so passive air form through floor boards helps with air changes. Good luck.
 
Totoca
automan2 said:
Light leaks are not an issue with autos. I always have a photo growing with my autos and though my passive tent vents bleed ambient light, still no problem...An inkbird controls intake and exhaust fans to keep parameters in spec. Exhaust is on full time with intake alternating between outside ambient air & inside passive per temperature control. Kinda makes my tent automatic...just have to feed .
Click to expand...

Ty m8, so autos don’t get light stress from this small leakages? Was covering every single hole along side the equipments indications lights to give them the least stress possible.

My tent is set up on my balcony(marquise) so I don’t have 2much control of the intake and the winter is coming :biggrin:

Set up the diy kitchen filter in one of the intake vents and the other remains just with a “long coat”, trying to keep my eye on the temps and hum to see any change, always had a good negative pressure so a change there will be hard to spot for me.

will let this run for a couple more days and keep vigilant
 
  • Like
Reactions: EP3
Totoca
EP3 said:
Having the same issue my self, but the other way around. Mrs is complaining about light coming out. I think, not know, that with autos you can get away with a little light without problems? Other people in the know should have an answer.
I do know that with passive ventilation air takes the easiest route, so any restriction will greatly reduce air flow. Even an open door will effect it..i.e big open door to go out or a 4-6 inch hole. Most of the air flow will be directed towards door and into hall or similar. Thats why folks add exhaust fans to create a negative atmosphere in the tent encouraging air to be drawn in from the room the intake vent is in.
Click to expand...
Yoo m8,
my original diy was for the light that was coming out, I run the lights at night and on my street if you looked up, it was unmistakably a red flag since I’m in prohibition land :redcard: and the 1st diy resolved both issues, no lights coming out at night and no light coming in during the day and the restriction was minimal since it was just strapped on the top of the flap.

still have the other passive like this and I don’t know if I’ll go back or forward with this “upgrade”
 
  • Like
Reactions: EP3
Dutch Passion Lemon Z

Blog entry information

Author
Totoca
Read time
1 min read
Views
501
Comments
7
Last update
Join the discussion

More entries in New Grower Journals

  • Azton
    Terminology
    I have just this last year been present online. Wow. I haven't really been interested in the...
  • Azton
    There you are
    I had almost given up on you This is a freebie seed from SeedStockers, a Panty Punch. I had...
  • Azton
    Autos so far
    I love growing Autoflowers now, it's so much fun. The best part is the instability, they can be...
  • Azton
    Nitrogen
    Today I did some side by side testing of different stuff I've grown. Photos and autos. I wanted...
  • Azton
    Bro science
    After yesterday's playing around with that CO2 meter I remembered an episode from when I lived...

More entries from Totoca

  • Totoca
    Week 12, weight in and final journal entry
    Harvest and 7 days of drying completed, Buds Jared up Blue dream - #1 46g #2 65g Zkittlez - #1...
  • Totoca
    Final week 11
    The race has ended after 11 weeks and yesterday was harvesting day. 48hrs of darkness before...
  • Totoca
    Week 10
    Another week went by and this next might be the last one or not :biggrin: Buds look awesome...
  • Totoca
    Week 9 results
    Another week completed :hump::hump::biggrin:. Im considering another couple of feeds at least...
  • Totoca
    Week 8 done
    Another week and the end is near. Had a small incident and broke a side branch of one of my...

Share this entry

Back
Top