In a 2 x 3 × 62in grow tent, using a humidifier and dehumidifier, plugged into a inkbird 200 humidity controller and a inkbird 310t temperature controller, which I have my inline fan plugged into with a speed controller. The only things I know so far that working are the alarms. Can someone help me on how I should set these things or is it even possible that they work!!!! Trying to keep my humidity between 50 and 60 and the temperature between 70 and 82.. 1st grow and getting frustrated
Need help with temperature and humidity control
- Thread starter Roger Wolf
- Start date
- Joined
- Jun 3, 2017
- Messages
- 5,343
- Reputation
- 415
- Reaction score
- 14,151
- Points
- 0
- Currently Smoking
- personal F1
Honestly it sounds like your over-gadgeted...
Wonder if running the dehumidifier & the humidifier are fighting each other. Been at this a bit, and haven't gotten any monitoring equipment, but from spring to fall I need the humidity and fall to spring the dehumidifier.
The 70 looks a bit on the cool side.
Hps temps 70 to 78 Led 80 to 85 for maximum growth.
Sometimes a rip or two helps get the mind workin... might be time for a break?
Wonder if running the dehumidifier & the humidifier are fighting each other. Been at this a bit, and haven't gotten any monitoring equipment, but from spring to fall I need the humidity and fall to spring the dehumidifier.
The 70 looks a bit on the cool side.
Hps temps 70 to 78 Led 80 to 85 for maximum growth.
Sometimes a rip or two helps get the mind workin... might be time for a break?
- Joined
- Feb 23, 2014
- Messages
- 20,584
- Reputation
- 40
- Reaction score
- 83,933
- Points
- 0
- Currently Smoking
- are you special?
inkbirds use a bit of fuzzy logic.
temp 70-82 assuming the perfect temp being in the middle of 70-82 being 76
so set the ts to 76 hd to 6 and cd to 6
if the temp goes above 76+6 whatever you have plugged into the cooling end will turn on.if it goes below 76-6 whatever you have plugged into the heater plug will turn on.
an important note.....heat or cooling will not turn off again untill it hits 76 the ts.
the humidity works the same.
good luck n keep er lit
temp 70-82 assuming the perfect temp being in the middle of 70-82 being 76
so set the ts to 76 hd to 6 and cd to 6
if the temp goes above 76+6 whatever you have plugged into the cooling end will turn on.if it goes below 76-6 whatever you have plugged into the heater plug will turn on.
an important note.....heat or cooling will not turn off again untill it hits 76 the ts.
the humidity works the same.
good luck n keep er lit
Similar threads
