Soaking Seeds
The Plan:
- Roots Organics Lush soil
- 4 x 5 gallon food-safe buckets with GroBucket inserts
- Pawfly 7w 254gph Adjustable Aerator Pump with a 4 Outlet Manifold
- Tap water as needed, but aired-out ~48hrs for chlorine reasons, and PH’d to the mid 6s based on the testing color/using GH drops (for now, may switch to ascorbic acid in the future once I run out of this first bottle).
- Mars Hydro 2x4 Grow Tent - 48''X24''X71''(120X60X180cm)
- Mars Hydro 4 Inch Inline Fan with Thermostat Controller and Carbon Filter
- Mars Hydro SP3000 300w LED
- 18/6 - Likely will start ~35%, 20” from the soil once the seeds pop and I plant them in the buckets (within 24-48 hours?).
The seeds I'm using are all progeny from a tent that had 5 different feminized autoflower strains in it, where one or more hermied from stress (possibly heat/light/underwatered at a critical time, etc...wasn't documented well), genetics, and/or were pollinated by outside contamination.
The harvest from all the plants that these seeds were grown from vaped well, and produced a ton of seeds, so I figured we'd try a run with a few for our first go at using GroBuckets...so here's to hoping we'll just get feminized autos and a successful grow of progeny from the following (GNC, LDZ/Derz, PNG, and SH):
Haven’t used a paper towel method in a while...the last few grows I popped seeds one at a time in just a shot glass of water, in a covered coffee mug, on top of a receiver that was warm, but this seemed to make more sense since I’m trying to get 4 going at once and it is the first time I’ve tried to germinate seeds that I’ve grown:
- Roots Organics Lush soil
- 4 x 5 gallon food-safe buckets with GroBucket inserts
- Pawfly 7w 254gph Adjustable Aerator Pump with a 4 Outlet Manifold
- Tap water as needed, but aired-out ~48hrs for chlorine reasons, and PH’d to the mid 6s based on the testing color/using GH drops (for now, may switch to ascorbic acid in the future once I run out of this first bottle).
- Mars Hydro 2x4 Grow Tent - 48''X24''X71''(120X60X180cm)
- Mars Hydro 4 Inch Inline Fan with Thermostat Controller and Carbon Filter
- Mars Hydro SP3000 300w LED
- 18/6 - Likely will start ~35%, 20” from the soil once the seeds pop and I plant them in the buckets (within 24-48 hours?).
The seeds I'm using are all progeny from a tent that had 5 different feminized autoflower strains in it, where one or more hermied from stress (possibly heat/light/underwatered at a critical time, etc...wasn't documented well), genetics, and/or were pollinated by outside contamination.
The harvest from all the plants that these seeds were grown from vaped well, and produced a ton of seeds, so I figured we'd try a run with a few for our first go at using GroBuckets...so here's to hoping we'll just get feminized autos and a successful grow of progeny from the following (GNC, LDZ/Derz, PNG, and SH):
Haven’t used a paper towel method in a while...the last few grows I popped seeds one at a time in just a shot glass of water, in a covered coffee mug, on top of a receiver that was warm, but this seemed to make more sense since I’m trying to get 4 going at once and it is the first time I’ve tried to germinate seeds that I’ve grown: