DIY Diy dry tent

Joined
Jun 5, 2020
Messages
151
Reputation
10
Reaction score
154
Points
0
Excuse the crap sketch, I've got a spare plastic greenhouse that I was gonna convert into a dry tent. I'll have a 6 inch ducting at the top to run some ducting to my tent to slowly pull out some of the smell. I'll put holes either side to allow fresh air in/out with a small USB fan on a low setting to move air around. I'll hang the buds from the top shelf.

I'll then cover it with a black sheet to darken it out.

Any opinions on this? Do you think it would work?

20201122_144922.jpg
 
Provided you can keep the temps and rH in the correct zone, it should be fine.
 
Excuse the crap sketch, I've got a spare plastic greenhouse that I was gonna convert into a dry tent. I'll have a 6 inch ducting at the top to run some ducting to my tent to slowly pull out some of the smell. I'll put holes either side to allow fresh air in/out with a small USB fan on a low setting to move air around. I'll hang the buds from the top shelf.

I'll then cover it with a black sheet to darken it out.

Any opinions on this? Do you think it would work?

View attachment 1256436
hello that will prob work it might get condensation if temps very to much and not enough air movement being plastic
 
Back
Top