Lighting 69v vero29??? Can it be??

[Jimmyclone]

I have placed an order on cutter for 10 of there vero sup1 kits.. So 10 chips, 10 sinks, 10 reflectors , 10 thermal pads.. But it says the chips are 69v?? I thought they were 36v chips?? Trying to find a driver to do 5 veros at a time.. Heres the link? Are these actual 36v chips? I have emailed cutter directly and on RIU with no response to this question...
Any help welcomed
Thanks
http://www.cutter.com.au/proddetail.php?prod=cut3154

 

[nudd]

@Jimmyclone the only driver I can see is the hlg 240-700a/b will drive 5 at around 45w each
or the hlg 320-700 will drive 6 ta 45w
yes there are 72v vero 29 the voltage drops the lower you drive them
hope that helps
nudd

 

[Jimmyclone]

Thanks bud... Think ill. Get the 36v ones so i can give them. Some more juice.

 

[KonopCh]

I would go with 50V Vero 29. Better fit to drivers and better lumen output.

Mean Well HLG-320H-C1050 can drive 5x Vero 29 B at 1050mA.
Mean Well HLG-240H-C700 5x Vero 29 C at 700mA.
Mean Well HLG-120H-C700 5x Vero 29 D at 700mA.
Mean Well HLG-185H-C1050 5x Vero 29 D at 1050mA.
Mean Well HLG-240H-C1400 5x Vero 29 D at 1400mA.
Mean Well HLG-320H-C1750 5x Vero 29 D at 1750mA. (this option I would go with)

 

[BigSm0]

Thanks bud... Think ill. Get the 36v ones so i can give them. Some more juice.

You don't need more juice to hit the same wattage.

Amps x volts = watts

If one of the numbers is higher the other doesn't have to be

 

[Jimmyclone]

I understand that, i am a electrician by .
trade. The problem is finding a driver that can push enough of them. I dont want to buy 5-6 drivers. I canceled my order as im going to get the lower voltage ones.
Thanks everyone

 

[Jimmyclone]

And im. Getting 16 of those baby's.
16 x vero29 SE poke ins.. 36v
4 x hlg240-1750B
Should be close to 1000 real watts at the wall....
Cheers

 

[Groff]

And im. Getting 16 of those baby's.
16 x vero29 SE poke ins.. 36v
4 x hlg240-1750B
Should be close to 1000 real watts at the wall....
Cheers

You are going to fully document this build, right?

 

[Jimmyclone]

I sure can. Got all my angle pieces and hardware yesterday. Waiting on some drivers and order will ship. Its coming up from the usa, so I have no idea how long it will take.
Can start a build/journal when done..
Cheers