January 17th
Soaked both seeds in a shot glass with distilled water for about 20hrs until the seed started to crack.
On January 18th
Placed the seeds in pre soaked jiffy pellets and placed in top of closet in dark space until I'm able to see some white root in the soil.
Today: January 22nd. Saw a little white root breaking the surface and went ahead and placed under 15w full spectrum LED while still in jiffy pellet.
Any advise will be very appreciated. This is my first grow in about 6 years. I'm sticking with Autos for the purpose of no lighting changes and quicker yields for personal medical use.
Soil: I will be using jiffy pellets to start off the seedlings, at about 1 week in I will add the pellet to a 1gallon plastic pot with holes drilled in sides for drainage. Soil type will be a mix of cow manure compost, perlite and peat moss.
I have Fox Farm nutes I will use at week 2( Big Bloom) and once flowering starts I will use the
extra strength fertilizer for flowering.
Lights: I have a 45w LED light with 3 arms that put out 15watts each. I start the seedings with this and use this through entire grow process. It's easy to maneuver the lights around and under the canopy to make sure all nodes get hit. For main light I have a 50w UFO led full spectrum light I will keep on around 14in above canopy for 24hrs a day. Once 5 weeks in I then switch over to my YGROW 600w LED to finish off the l9fe cycle until harvest. I will have you watch this though, last time I used this on tomatoes they all burned even with light at 30in away
The plant already in the box is an AC/DC seed I got from some CBD I ordered.. this was my attempt at growing I planted 3 and only 1 survived....barely. .. it's in flowering stage now.
Sent from my SM-G950U using Tapatalk
Soaked both seeds in a shot glass with distilled water for about 20hrs until the seed started to crack.
On January 18th
Placed the seeds in pre soaked jiffy pellets and placed in top of closet in dark space until I'm able to see some white root in the soil.
Today: January 22nd. Saw a little white root breaking the surface and went ahead and placed under 15w full spectrum LED while still in jiffy pellet.
Any advise will be very appreciated. This is my first grow in about 6 years. I'm sticking with Autos for the purpose of no lighting changes and quicker yields for personal medical use.
Soil: I will be using jiffy pellets to start off the seedlings, at about 1 week in I will add the pellet to a 1gallon plastic pot with holes drilled in sides for drainage. Soil type will be a mix of cow manure compost, perlite and peat moss.
I have Fox Farm nutes I will use at week 2( Big Bloom) and once flowering starts I will use the
extra strength fertilizer for flowering. Lights: I have a 45w LED light with 3 arms that put out 15watts each. I start the seedings with this and use this through entire grow process. It's easy to maneuver the lights around and under the canopy to make sure all nodes get hit. For main light I have a 50w UFO led full spectrum light I will keep on around 14in above canopy for 24hrs a day. Once 5 weeks in I then switch over to my YGROW 600w LED to finish off the l9fe cycle until harvest. I will have you watch this though, last time I used this on tomatoes they all burned even with light at 30in away
The plant already in the box is an AC/DC seed I got from some CBD I ordered.. this was my attempt at growing I planted 3 and only 1 survived....barely. .. it's in flowering stage now.
Sent from my SM-G950U using Tapatalk
neat lil set up ya got 
im archie gemmill 
your butlins blue coat hi de high site rep 
a few things well worth a read.
Thanks for sharing your grow! 
