Dinafem Auto Industrial CBD in SuperSoil

Joined
Mar 21, 2017
Messages
418
Reputation
0
Reaction score
1,763
Points
0
I am growing this plant alongside 4 Mephisto plants and 1 DP BlackBerry Kush. I will be primarily focusing on my Mephisto grow log but I wanted to document this one with photographs. So this will be a short log with some good photos hopefully :)

Strain:
Industrial Plant Autoflowering CBD

Lighting:
8 citizen 1212 4k and 3.5k COBs, powered at 50 watts each. I will supplement with 2 blurple lights (mars hydro and vipar). For a total of 400 watts of COBs and 260 watts of blurple lights.
Total = 660 watts, 6 strains :)


Lighting Schedule:
19 hours on - 5 hours off (19/5)

Medium:

She will be grown in 3 gallon fabric pots with 1/3 cocoloco, 1/3 cocoloco gbd's supersoil half strength, 1/3 cocoloco gbd's supersoil slightly stronger than full strength (Thanks @gbd )

EDIT!!! --> We ran out of CocoLoco in the last 1/3 layer. So all plants will now have a 1/3 layer of Botanicare ReadyGro CocoCoir Moisture. This will be the TOP LAYER, un-amended. --(http://www.botanicare.com/ReadyGrotrade-Moisture-P67C5.aspx)

Nutes:
I will use AN CarboLoad, GeneralOrganics CalMag, and Recharge.

Extraction:
6inch ActiveAir 400CFM inline fan
iPower 1050+ IAV Virgin Charcoal


Tent:
48"x48"x80" (4x4x6.6)

Water:
I will be using RO water. I have decided to go this route because my tap water is extremely mineralized (300PPM). I will use extra CalMag in the organics to supplement for this.

She is currently germinating and will be planted in the next day or two!
 
Last edited:
Thanks @KonopCh and @jingo ... Any ideas how stable the CBD characteristics of this plant are? I did a little searching but didn't see any testing.

Also..... Please note a change to the original post

EDIT!!! --> We ran out of CocoLoco in the last 1/3 layer. So all plants will now have a 1/3 layer of Botanicare ReadyGro CocoCoir Moisture. This will be the TOP LAYER, un-amended. --(http://www.botanicare.com/ReadyGrotrade-Moisture-P67C5.aspx)
 
@jingo I just read through your CBD grow log.... HOLY SHIT. Those are some giant plants! And it looks like they all tested very close to 1:1 THC/CBD ratio. That is excellent! Very excited about that :)
Your mix sounds like it should do well and yes they do get big.[emoji268]



Current Diaries

Jingo grows zambeza white widow and supper silver haze

Jingo does Remo nutes, Dinafem white cheese and portal kracken.

Jingo grows Dinafem White Cheese, lumigrow pro 325, gh and remo nutes


Jingo'scontinuous cbd grow, lumigrow pro LED, GH nutrients in coco, with test results.
 

I didn't really plant that girl because I thought she might get huge... Now I am excited to see what she will do! I would love to have a few extra ounces (or grams) of flower for extracts!
 
I didn't really plant that girl because I thought she might get huge... Now I am excited to see what she will do! I would love to have a few extra ounces (or grams) of flower for extracts!
Probably good that you haven't planted her on your next grow you can just grow only one plant under that light and go for a pound or more.



Current Diaries

Jingo grows zambeza white widow and supper silver haze

Jingo does Remo nutes, Dinafem white cheese and portal kracken.

Jingo grows Dinafem White Cheese, lumigrow pro 325, gh and remo nutes


Jingo'scontinuous cbd grow, lumigrow pro LED, GH nutrients in coco, with test results.
 

Sorry, I meant that my motivation for planting her was not to grow a giant plant, but simply because I wanted to try a personal CBD smoke. I had absolutely no clue that they got that big. I will probably grow another one in DWC by itself in the future. Or maybe pick another sativa leaning CBD giant?


Plant Update!
IP-CBD is in my 3 gallon fabric pot right now. She is the last to sprout though! But I think it has only been 48 hours in the medium. No reason to worry... Lets call today 'Day Zero'.
 
Back
Top